(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.
Tel: 0222-361-1555
Email: cs@misumi.com.vn
8:00 - 17:00 (Mon - Sat)
Search by Category / Brand Tìm theo danh mục, nhãn hiệu
Search by Category Tìm theo danh mục
- [Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. - [Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.
Product Detail
Table Size (Length) L (Range Selectable)
Table Size (Width) W (Range Selectable)
Load Capacity (Range Selectable)
Travel Distance (X-Axis) (Range Selectable)
Travel Distance (Y-Axis) (Range Selectable)
Table Material
Table Surface Treatment
Travel Guide
Table Size (Thickness) H (Range Selectable)
Table Size (Length) L
Table Size (Width) W
Load Capacity
Travel Distance (X-Axis)
Travel Distance (Y-Axis)
Table Size (Thickness) H
Travel Distance (Z-Axis)
Feed Knob Position
Reversed
Clamp Method Selection
Feeding Method Selection
Grease Selection
type
CAD
Days to Ship
Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước
-
Table Size (Length) L (Range Selectable)(mm)
-
Table Size (Width) W (Range Selectable)(mm)
-
Load Capacity (Range Selectable)(N)
- 5~30
- 30.1~50
- 50.1~100
- 100.1~
-
Travel Distance (X-Axis) (Range Selectable)(mm)
-
Travel Distance (Y-Axis) (Range Selectable)(mm)
-
Table Material
- Stainless Steel
- Aluminum Alloy
- Stainless Steel
-
Table Surface Treatment
- Black Anodize
- 无电解镀镍
-
Travel Guide
- Cross Roller
- Linear Ball
-
Table Size (Thickness) H (Range Selectable)(mm)
-
Table Size (Length) L(mm)
-
Table Size (Width) W(mm)
-
Load Capacity(N)
-
Travel Distance (X-Axis)(mm)
-
Travel Distance (Y-Axis)(mm)
-
Table Size (Thickness) H(mm)
-
Travel Distance (Z-Axis)(mm)
-
Feed Knob Position
- Center
- Side
-
Reversed
- Standard
- Right and Left
- Up/Down
- Top/Bottom, Right/Left
-
Clamp Method Selection
- Disc Clamp [H]
- Opposed Clamp [P]
- Standard [S]
-
Feeding Method Selection
- Feed Screw Pitch 0.5 [B]
- Screw with Hex Socket, Pitch 0.5 [F]
- Feed Screw Pitch 1.0 [J]
- Coarse/Fine Micrometer Head [M]
- Digital Micrometer Head [D]
- Standard Micrometer Head [N]
-
Grease Selection
- G (Standard)
- R (For Clean Environment)
-
type
- FSXC
- FSXR
- FSXYR
- FSZR
-
CADCAD
- 2D
- 3D
Days to ShipSố ngày giao hàng
-
- Alltất cả các
- 8 Day(s) or Less
Specify AlterationsChỉ định thay đổi
[High Precision] X / XY / Z-Axis Stages - Selectable (Part Number)
![[High Precision] X / XY / Z-Axis Stages - Selectable](http://content.misumi-ec.com/image/upload/f_auto,q_auto,t_product_main/v1/p/jp/product/series/110300199010/110300199010_20200707150930.jpg?$product_main$)
Click this image to zoom it.Nhấp vào hình ảnh này để phóng to.
Move the mouse over or click the image to zoom
![[High Precision] X / XY / Z-Axis Stages - Selectable](http://content.misumi-ec.com/image/upload/f_auto,q_auto,t_product_thum/v1/p/jp/product/series/110300199010/110300199010_20200707150930.jpg?$product_thum$)
![[High Precision] X / XY / Z-Axis Stages - Selectable](http://content.misumi-ec.com/image/upload/f_auto,q_auto,t_product_thum/v1/p/jp/product/series/110300199010/110300199010_002.jpg?$product_thum$)
![[High Precision] X / XY / Z-Axis Stages - Selectable](http://content.misumi-ec.com/image/upload/f_auto,q_auto,t_product_thum/v1/p/jp/product/series/110300199010/110300199010_003.jpg?$product_thum$)
![[High Precision] X / XY / Z-Axis Stages - Selectable](http://content.misumi-ec.com/image/upload/f_auto,q_auto,t_product_thum/v1/p/jp/product/series/110300199010/110300199010_004.jpg?$product_thum$)
![[High Precision] X / XY / Z-Axis Stages - Selectable](http://content.misumi-ec.com/image/upload/f_auto,q_auto,t_product_thum/v1/p/jp/product/series/110300199010/110300199010_20200707150931.jpg?$product_thum$)
![[High Precision] X / XY / Z-Axis Stages - Selectable](http://content.misumi-ec.com/image/upload/f_auto,q_auto,t_product_thum/v1/p/jp/product/series/110300199010/110300199010_006.jpg?$product_thum$)
You can add up to 6 items per a category to the compare list.
Part Number :
Copy Part Number URL to Clipboard
The part number URL has been copied into your clipboard.
-
- Order Qty :
-
-
- Price :
- ---
-
- Total Price :
- ---
-
- Days to ship :
- ---
Select part number to Order Now/ Add to Cart
Similar Products
Product DetailProduct Description
You can freely choose the feed position, feed method, clamp method, and type of grease.
Part Number
- Incomplete part number.
Please use left hand selections to complete a part number.Incomplete part number.
Please use left hand selections to complete a part number.
Loading...Tải…
| Part Number |
|---|
| FSXC25-A-[B,F,N]-S-[G,R] |
| FSXC25-AR-[B,F,N]-S-[G,R] |
| FSXC25-AZ-[B,F,N]-S-[G,R] |
| FSXC25-C-[B,F,N]-S-[G,R] |
| FSXC25-CR-[B,F,N]-S-[G,R] |
| FSXC25-CZ-[B,F,N]-S-[G,R] |
| FSXC40-A-[B,F,J,M,N]-[H,S]-[G,R] |
| FSXC40-AR-[B,F,J,M,N]-[H,S]-[G,R] |
| FSXC40-AZ-[B,F,J,M,N]-[H,S]-[G,R] |
| FSXC40-C-[B,F,J,M,N]-[H,P,S]-[G,R] |
| FSXC40-CR-[B,F,J,M,N]-[H,P,S]-[G,R] |
| FSXC40-CZ-[B,F,J,M,N]-[H,S]-[G,R] |
| FSXC60-A-[B,F,J,M,N]-[H,S]-[G,R] |
| FSXC60-AR-[B,F,J,M,N]-[H,S]-[G,R] |
| FSXC60-AZ-[B,F,J,M,N]-[H,S]-[G,R] |
| FSXC60-C-[B,F,J,M,N]-[H,P,S]-[G,R] |
| FSXC60-CR-[B,F,J,M,N]-[H,P,S]-[G,R] |
| FSXC60-CZ-[B,F,J,M,N]-[H,S]-[G,R] |
| FSXC80-A-[B,D,F,J,M,N]-S-[G,R] |
| FSXC80-AR-[B,D,F,J,M,N]-S-[G,R] |
| FSXC80-AZ-[B,F,J,M,N]-S-[G,R] |
| FSXC80-C-[B,D,F,J,M,N]-S-[G,R] |
| FSXC80-CR-[B,F,J,M,N]-S-[G,R] |
| FSXC80-CZ-[B,F,J,M,N]-S-[G,R] |
| FSXR25-A-[B,F,N]-S-[G,R] |
| FSXR25-AR-[B,F,N]-S-[G,R] |
| FSXR25-AZ-[B,F,N]-S-[G,R] |
| FSXR25-AZR-[B,F,N]-S-[G,R] |
| FSXR25-C-[B,F,N]-S-[G,R] |
| FSXR25-CR-[B,F,N]-S-[G,R] |
| FSXR25-CZ-[B,F,N]-S-[G,R] |
| FSXR25-CZR-[B,F,N]-S-[G,R] |
| FSXR40-A-[B,F,J,M,N]-[H,S]-[G,R] |
| FSXR40-AR-[B,F,J,M,N]-[H,S]-[G,R] |
| FSXR40-AZ-[B,F,J,M,N]-[H,S]-[G,R] |
| FSXR40-AZR-[B,F,J,M,N]-[H,S]-[G,R] |
| FSXR40-C-[B,F,J,M,N]-[H,P,S]-[G,R] |
| FSXR40-CR-[B,F,J,M,N]-[H,P,S]-[G,R] |
| FSXR40-CZ-[B,F,J,M,N]-[H,S]-[G,R] |
| FSXR40-CZR-[B,F,J,M,N]-[H,S]-[G,R] |
| FSXR50-A-[B,F,J,M,N]-[H,S]-[G,R] |
| FSXR50-AR-[B,F,J,M,N]-[H,S]-[G,R] |
| FSXR50-AZ-[B,F,J,M,N]-[H,S]-[G,R] |
| FSXR50-AZR-[B,F,J,M,N]-[H,S]-[G,R] |
| FSXR50-C-[B,F,J,M,N]-[H,P,S]-[G,R] |
| FSXR50-CR-[B,F,J,M,N]-[H,P,S]-[G,R] |
| FSXR50-CZ-[B,F,J,M,N]-[H,S]-[G,R] |
| FSXR50-CZR-[B,F,J,M,N]-[H,S]-[G,R] |
| FSXR60-A-[B,F,J,M,N]-[H,S]-[G,R] |
| FSXR60-AR-[B,F,J,M,N]-[H,S]-[G,R] |
| FSXR60-AZ-[B,F,J,M,N]-[H,S]-[G,R] |
| FSXR60-AZR-[B,F,J,M,N]-[H,S]-[G,R] |
| FSXR60-C-[B,F,J,M,N]-[H,P,S]-[G,R] |
| FSXR60-CR-[B,F,J,M,N]-[H,P,S]-[G,R] |
| FSXR60-CZ-[B,F,J,M,N]-[H,S]-[G,R] |
| FSXR60-CZR-[B,F,J,M,N]-[H,S]-[G,R] |
| FSXR70-A-[B,F,J,M,N]-[H,S]-[G,R] |
| FSXR70-AR-[B,F,J,M,N]-[H,S]-[G,R] |
| FSXR70-AZ-[B,F,J,M,N]-[H,S]-[G,R] |
| FSXR70-AZR-[B,F,J,M,N]-[H,S]-[G,R] |
| FSXR70-C-[B,F,J,M,N]-[H,P,S]-[G,R] |
| FSXR70-CR-[B,F,J,M,N]-[H,P,S]-[G,R] |
| FSXR70-CZ-[B,F,J,M,N]-[H,S]-[G,R] |
| FSXR70-CZR-[B,F,J,M,N]-[H,S]-[G,R] |
| FSXR80-A-[B,D,F,J,M,N]-[H,S]-[G,R] |
| FSXR80-AR-[B,D,F,J,M,N]-[H,S]-[G,R] |
| FSXR80-AZ-[B,F,J,M,N]-[H,S]-[G,R] |
| FSXR80-AZR-[B,F,J,M,N]-[H,S]-[G,R] |
| FSXR80-C-[B,D,F,J,M,N]-[H,S]-[G,R] |
| FSXR80-CR-[B,F,J,M,N]-[H,S]-[G,R] |
| FSXR80-CZ-[B,F,J,M,N]-[H,S]-[G,R] |
| FSXR80-CZR-[B,F,J,M,N]-[H,S]-[G,R] |
| FSXYR25-A-[B,F,N]-S-[G,R] |
| FSXYR25-AR-[B,F,N]-S-[G,R] |
| FSXYR25-C-[B,F,N]-S-[G,R] |
| FSXYR25-CR-[B,F,N]-S-[G,R] |
| FSXYR40-A-[B,F,J,M,N]-S-[G,R] |
| FSXYR40-AR-[B,F,J,M,N]-S-[G,R] |
| FSXYR40-C-[B,F,J,M,N]-[H,P,S]-[G,R] |
| FSXYR40-CR-[B,F,J,M,N]-[H,P,S]-[G,R] |
| FSXYR50-A-[B,F,J,M,N]-S-[G,R] |
| FSXYR50-AR-[B,F,J,M,N]-S-[G,R] |
| FSXYR50-C-[B,F,J,M,N]-[H,P,S]-[G,R] |
| FSXYR50-CR-[B,F,J,M,N]-[H,P,S]-[G,R] |
| FSXYR60-A-[B,F,J,M,N]-S-[G,R] |
| FSXYR60-AR-[B,F,J,M,N]-S-[G,R] |
| FSXYR60-C-[B,F,J,M,N]-[H,P,S]-[G,R] |
| FSXYR60-CR-[B,F,J,M,N]-[H,P,S]-[G,R] |
| FSXYR70-A-[B,F,J,M,N]-S-[G,R] |
| FSXYR70-AR-[B,F,J,M,N]-S-[G,R] |
| Part Number | Price | Minimum Order Qty. | Volume Discount | Days to ShipSố ngày giao hàng | RoHS | Table Size (Length) L (Range Selectable) (mm) | Table Size (Width) W (Range Selectable) (mm) | Load Capacity (Range Selectable) (N) | Travel Distance (X-Axis) (Range Selectable) (mm) | Travel Distance (Y-Axis) (Range Selectable) (mm) | Table Material | Table Surface Treatment | Travel Guide | Table Size (Thickness) H (Range Selectable) (mm) | Table Size (Length) L (mm) | Table Size (Width) W (mm) | Load Capacity (N) | Travel Distance (X-Axis) (mm) | Travel Distance (Y-Axis) (mm) | Table Size (Thickness) H (mm) | Travel Distance (Z-Axis) (mm) | Table Parallelism (µm) | Moment Rigidity (Pitching) ("/N•cm) | Moment Rigidity (Yawing) ("/N•cm) | Moment Rigidity (Rolling) ("/N•cm) | Feed Knob Position | Reversed | Clamp Method Selection | Feeding Method Selection | Grease Selection |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | 8 Day(s) or more | 10 | ~25 | ~25 | 5~30 | Up to ±10mm | - | Aluminum Alloy | Black Anodize | Cross Roller | 1~15 | 25 | 25 | 9.8 | ±3.2 | - | 15 | - | 30 | 3.03 | 2.85 | 1.80 | Center | Standard | Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | ~25 | ~25 | 5~30 | Up to ±10mm | - | Aluminum Alloy | Black Anodize | Cross Roller | 1~15 | 25 | 25 | 9.8 | ±3.2 | - | 15 | - | 30 | 3.03 | 2.85 | 1.80 | Center | Right and Left | Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | ~25 | ~25 | 5~30 | Up to ±10mm | - | Aluminum Alloy | Black Anodize | Cross Roller | 1~15 | 25 | 25 | 9.8 | ±3.2 | - | 15 | - | 30 | 3.03 | 2.85 | 1.80 | Center | Up/Down | Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | ~25 | ~25 | 5~30 | Up to ±10mm | - | Aluminum Alloy | Black Anodize | Cross Roller | 1~15 | 25 | 25 | 9.8 | ±3.2 | - | 15 | - | 30 | 3.03 | 2.85 | 1.80 | Side | Standard | Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | ~25 | ~25 | 5~30 | Up to ±10mm | - | Aluminum Alloy | Black Anodize | Cross Roller | 1~15 | 25 | 25 | 9.8 | ±3.2 | - | 15 | - | 30 | 3.03 | 2.85 | 1.80 | Side | Right and Left | Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | ~25 | ~25 | 5~30 | Up to ±10mm | - | Aluminum Alloy | Black Anodize | Cross Roller | 1~15 | 25 | 25 | 9.8 | ±3.2 | - | 15 | - | 30 | 3.03 | 2.85 | 1.80 | Side | Up/Down | Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | 26~40 | 26~40 | 5~30 | Up to ±10mm | - | Aluminum Alloy | Black Anodize | Cross Roller | 15.1~20 | 40 | 40 | 19.6 | ±6.5 | - | 20 | - | 30 | 0.38 | 0.42 | 0.28 | Center | Standard | Disc Clamp [H] / Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | 26~40 | 26~40 | 5~30 | Up to ±10mm | - | Aluminum Alloy | Black Anodize | Cross Roller | 15.1~20 | 40 | 40 | 19.6 | ±6.5 | - | 20 | - | 30 | 0.38 | 0.42 | 0.28 | Center | Right and Left | Disc Clamp [H] / Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | 26~40 | 26~40 | 5~30 | Up to ±10mm | - | Aluminum Alloy | Black Anodize | Cross Roller | 15.1~20 | 40 | 40 | 19.6 | ±6.5 | - | 20 | - | 30 | 0.38 | 0.42 | 0.28 | Center | Up/Down | Disc Clamp [H] / Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | 26~40 | 26~40 | 5~30 | Up to ±10mm | - | Aluminum Alloy | Black Anodize | Cross Roller | 15.1~20 | 40 | 40 | 19.6 | ±6.5 | - | 20 | - | 30 | 0.38 | 0.42 | 0.28 | Side | Standard | Disc Clamp [H] / Opposed Clamp [P] / Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | 26~40 | 26~40 | 5~30 | Up to ±10mm | - | Aluminum Alloy | Black Anodize | Cross Roller | 15.1~20 | 40 | 40 | 19.6 | ±6.5 | - | 20 | - | 30 | 0.38 | 0.42 | 0.28 | Side | Right and Left | Disc Clamp [H] / Opposed Clamp [P] / Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | 26~40 | 26~40 | 5~30 | Up to ±10mm | - | Aluminum Alloy | Black Anodize | Cross Roller | 15.1~20 | 40 | 40 | 19.6 | ±6.5 | - | 20 | - | 30 | 0.38 | 0.42 | 0.28 | Side | Up/Down | Disc Clamp [H] / Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | 41~60 | 41~60 | 30.1~50 | Up to ±10mm | - | Aluminum Alloy | Black Anodize | Cross Roller | 15.1~20 | 60 | 60 | 49 | ±6.5 | - | 20 | - | 30 | 0.12 | 0.11 | 0.07 | Center | Standard | Disc Clamp [H] / Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | 41~60 | 41~60 | 30.1~50 | Up to ±10mm | - | Aluminum Alloy | Black Anodize | Cross Roller | 15.1~20 | 60 | 60 | 49 | ±6.5 | - | 20 | - | 30 | 0.12 | 0.11 | 0.07 | Center | Right and Left | Disc Clamp [H] / Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | 41~60 | 41~60 | 30.1~50 | Up to ±10mm | - | Aluminum Alloy | Black Anodize | Cross Roller | 15.1~20 | 60 | 60 | 49 | ±6.5 | - | 20 | - | 30 | 0.12 | 0.11 | 0.07 | Center | Up/Down | Disc Clamp [H] / Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | 41~60 | 41~60 | 30.1~50 | Up to ±10mm | - | Aluminum Alloy | Black Anodize | Cross Roller | 15.1~20 | 60 | 60 | 49 | ±6.5 | - | 20 | - | 30 | 0.12 | 0.11 | 0.07 | Side | Standard | Disc Clamp [H] / Opposed Clamp [P] / Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | 41~60 | 41~60 | 30.1~50 | Up to ±10mm | - | Aluminum Alloy | Black Anodize | Cross Roller | 15.1~20 | 60 | 60 | 49 | ±6.5 | - | 20 | - | 30 | 0.12 | 0.11 | 0.07 | Side | Right and Left | Disc Clamp [H] / Opposed Clamp [P] / Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | 41~60 | 41~60 | 30.1~50 | Up to ±10mm | - | Aluminum Alloy | Black Anodize | Cross Roller | 15.1~20 | 60 | 60 | 49 | ±6.5 | - | 20 | - | 30 | 0.12 | 0.11 | 0.07 | Side | Up/Down | Disc Clamp [H] / Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | 61~90 | 61~90 | 50.1~100 | ±10 to 30mm | - | Aluminum Alloy | Black Anodize | Cross Roller | 15.1~20 | 80 | 80 | 98 | ±12.5 | - | 20 | - | 30 | 0.05 | 0.05 | 0.04 | Center | Standard | Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Digital Micrometer Head [D] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | 61~90 | 61~90 | 50.1~100 | ±10 to 30mm | - | Aluminum Alloy | Black Anodize | Cross Roller | 15.1~20 | 80 | 80 | 98 | ±12.5 | - | 20 | - | 30 | 0.05 | 0.05 | 0.04 | Center | Right and Left | Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Digital Micrometer Head [D] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | 61~90 | 61~90 | 50.1~100 | ±10 to 30mm | - | Aluminum Alloy | Black Anodize | Cross Roller | 15.1~20 | 80 | 80 | 98 | ±12.5 | - | 20 | - | 30 | 0.05 | 0.05 | 0.04 | Center | Up/Down | Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | 61~90 | 61~90 | 50.1~100 | ±10 to 30mm | - | Aluminum Alloy | Black Anodize | Cross Roller | 15.1~20 | 80 | 80 | 98 | ±12.5 | - | 20 | - | 30 | 0.05 | 0.05 | 0.04 | Side | Standard | Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Digital Micrometer Head [D] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | 61~90 | 61~90 | 50.1~100 | ±10 to 30mm | - | Aluminum Alloy | Black Anodize | Cross Roller | 15.1~20 | 80 | 80 | 98 | ±12.5 | - | 20 | - | 30 | 0.05 | 0.05 | 0.04 | Side | Right and Left | Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | 61~90 | 61~90 | 50.1~100 | ±10 to 30mm | - | Aluminum Alloy | Black Anodize | Cross Roller | 15.1~20 | 80 | 80 | 98 | ±12.5 | - | 20 | - | 30 | 0.05 | 0.05 | 0.04 | Side | Up/Down | Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | ~25 | ~25 | 30.1~50 | Up to ±10mm | - | [Stainless Steel] SUS440C | 无电解镀镍 | Linear Ball | 1~15 | 25 | 25 | 39.2 | ±3.2 | - | 12 | - | 30 | 1.9 | 1.1 | 1.1 | Center | Standard | Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | ~25 | ~25 | 30.1~50 | Up to ±10mm | - | [Stainless Steel] SUS440C | 无电解镀镍 | Linear Ball | 1~15 | 25 | 25 | 39.2 | ±3.2 | - | 12 | - | 30 | 1.9 | 1.1 | 1.1 | Center | Right and Left | Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | ~25 | ~25 | 30.1~50 | Up to ±10mm | - | [Stainless Steel] SUS440C | 无电解镀镍 | Linear Ball | 1~15 | 25 | 25 | 39.2 | ±3.2 | - | 12 | - | 30 | 1.9 | 1.1 | 1.1 | Center | Up/Down | Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | ~25 | ~25 | 30.1~50 | Up to ±10mm | - | [Stainless Steel] SUS440C | 无电解镀镍 | Linear Ball | 1~15 | 25 | 25 | 39.2 | ±3.2 | - | 12 | - | 30 | 1.9 | 1.1 | 1.1 | Center | Top/Bottom, Right/Left | Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | ~25 | ~25 | 30.1~50 | Up to ±10mm | - | [Stainless Steel] SUS440C | 无电解镀镍 | Linear Ball | 1~15 | 25 | 25 | 39.2 | ±3.2 | - | 12 | - | 30 | 1.9 | 1.1 | 1.1 | Side | Standard | Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | ~25 | ~25 | 30.1~50 | Up to ±10mm | - | [Stainless Steel] SUS440C | 无电解镀镍 | Linear Ball | 1~15 | 25 | 25 | 39.2 | ±3.2 | - | 12 | - | 30 | 1.9 | 1.1 | 1.1 | Side | Right and Left | Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | ~25 | ~25 | 30.1~50 | Up to ±10mm | - | [Stainless Steel] SUS440C | 无电解镀镍 | Linear Ball | 1~15 | 25 | 25 | 39.2 | ±3.2 | - | 12 | - | 30 | 1.9 | 1.1 | 1.1 | Side | Up/Down | Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | ~25 | ~25 | 30.1~50 | Up to ±10mm | - | [Stainless Steel] SUS440C | 无电解镀镍 | Linear Ball | 1~15 | 25 | 25 | 39.2 | ±3.2 | - | 12 | - | 30 | 1.9 | 1.1 | 1.1 | Side | Top/Bottom, Right/Left | Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | 26~40 | 26~40 | 50.1~100 | Up to ±10mm | - | [Stainless Steel] SUS440C | 无电解镀镍 | Linear Ball | 15.1~20 | 40 | 40 | 98 | ±6.5 | - | 16 | - | 15 | 0.42 | 0.35 | 0.21 | Center | Standard | Disc Clamp [H] / Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | 26~40 | 26~40 | 50.1~100 | Up to ±10mm | - | [Stainless Steel] SUS440C | 无电解镀镍 | Linear Ball | 15.1~20 | 40 | 40 | 98 | ±6.5 | - | 16 | - | 15 | 0.42 | 0.35 | 0.21 | Center | Right and Left | Disc Clamp [H] / Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | 26~40 | 26~40 | 50.1~100 | Up to ±10mm | - | [Stainless Steel] SUS440C | 无电解镀镍 | Linear Ball | 15.1~20 | 40 | 40 | 98 | ±6.5 | - | 16 | - | 15 | 0.42 | 0.35 | 0.21 | Center | Up/Down | Disc Clamp [H] / Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | 26~40 | 26~40 | 50.1~100 | Up to ±10mm | - | [Stainless Steel] SUS440C | 无电解镀镍 | Linear Ball | 15.1~20 | 40 | 40 | 98 | ±6.5 | - | 16 | - | 15 | 0.42 | 0.35 | 0.21 | Center | Top/Bottom, Right/Left | Disc Clamp [H] / Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | 26~40 | 26~40 | 50.1~100 | Up to ±10mm | - | [Stainless Steel] SUS440C | 无电解镀镍 | Linear Ball | 15.1~20 | 40 | 40 | 98 | ±6.5 | - | 16 | - | 15 | 0.42 | 0.35 | 0.21 | Side | Standard | Disc Clamp [H] / Opposed Clamp [P] / Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | 26~40 | 26~40 | 50.1~100 | Up to ±10mm | - | [Stainless Steel] SUS440C | 无电解镀镍 | Linear Ball | 15.1~20 | 40 | 40 | 98 | ±6.5 | - | 16 | - | 15 | 0.42 | 0.35 | 0.21 | Side | Right and Left | Disc Clamp [H] / Opposed Clamp [P] / Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | 26~40 | 26~40 | 50.1~100 | Up to ±10mm | - | [Stainless Steel] SUS440C | 无电解镀镍 | Linear Ball | 15.1~20 | 40 | 40 | 98 | ±6.5 | - | 16 | - | 15 | 0.42 | 0.35 | 0.21 | Side | Up/Down | Disc Clamp [H] / Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | 26~40 | 26~40 | 50.1~100 | Up to ±10mm | - | [Stainless Steel] SUS440C | 无电解镀镍 | Linear Ball | 15.1~20 | 40 | 40 | 98 | ±6.5 | - | 16 | - | 15 | 0.42 | 0.35 | 0.21 | Side | Top/Bottom, Right/Left | Disc Clamp [H] / Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | 41~60 | 41~60 | 100.1~ | Up to ±10mm | - | [Stainless Steel] SUS440C | 无电解镀镍 | Linear Ball | 15.1~20 | 50 | 50 | 147 | ±6.5 | - | 16 | - | 15 | 0.15 | 0.14 | 0.09 | Center | Standard | Disc Clamp [H] / Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | 41~60 | 41~60 | 100.1~ | Up to ±10mm | - | [Stainless Steel] SUS440C | 无电解镀镍 | Linear Ball | 15.1~20 | 50 | 50 | 147 | ±6.5 | - | 16 | - | 15 | 0.15 | 0.14 | 0.09 | Center | Right and Left | Disc Clamp [H] / Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | 41~60 | 41~60 | 100.1~ | Up to ±10mm | - | [Stainless Steel] SUS440C | 无电解镀镍 | Linear Ball | 15.1~20 | 50 | 50 | 147 | ±6.5 | - | 16 | - | 15 | 0.15 | 0.14 | 0.09 | Center | Up/Down | Disc Clamp [H] / Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | 41~60 | 41~60 | 100.1~ | Up to ±10mm | - | [Stainless Steel] SUS440C | 无电解镀镍 | Linear Ball | 15.1~20 | 50 | 50 | 147 | ±6.5 | - | 16 | - | 15 | 0.15 | 0.14 | 0.09 | Center | Top/Bottom, Right/Left | Disc Clamp [H] / Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | 41~60 | 41~60 | 100.1~ | Up to ±10mm | - | [Stainless Steel] SUS440C | 无电解镀镍 | Linear Ball | 15.1~20 | 50 | 50 | 147 | ±6.5 | - | 16 | - | 15 | 0.15 | 0.14 | 0.09 | Side | Standard | Disc Clamp [H] / Opposed Clamp [P] / Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | 41~60 | 41~60 | 100.1~ | Up to ±10mm | - | [Stainless Steel] SUS440C | 无电解镀镍 | Linear Ball | 15.1~20 | 50 | 50 | 147 | ±6.5 | - | 16 | - | 15 | 0.15 | 0.14 | 0.09 | Side | Right and Left | Disc Clamp [H] / Opposed Clamp [P] / Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | 41~60 | 41~60 | 100.1~ | Up to ±10mm | - | [Stainless Steel] SUS440C | 无电解镀镍 | Linear Ball | 15.1~20 | 50 | 50 | 147 | ±6.5 | - | 16 | - | 15 | 0.15 | 0.14 | 0.09 | Side | Up/Down | Disc Clamp [H] / Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | 41~60 | 41~60 | 100.1~ | Up to ±10mm | - | [Stainless Steel] SUS440C | 无电解镀镍 | Linear Ball | 15.1~20 | 50 | 50 | 147 | ±6.5 | - | 16 | - | 15 | 0.15 | 0.14 | 0.09 | Side | Top/Bottom, Right/Left | Disc Clamp [H] / Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | 41~60 | 41~60 | 100.1~ | Up to ±10mm | - | [Stainless Steel] SUS440C | 无电解镀镍 | Linear Ball | 15.1~20 | 60 | 60 | 196 | ±6.5 | - | 16 | - | 15 | 0.08 | 0.08 | 0.05 | Center | Standard | Disc Clamp [H] / Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | 41~60 | 41~60 | 100.1~ | Up to ±10mm | - | [Stainless Steel] SUS440C | 无电解镀镍 | Linear Ball | 15.1~20 | 60 | 60 | 196 | ±6.5 | - | 16 | - | 15 | 0.08 | 0.08 | 0.05 | Center | Right and Left | Disc Clamp [H] / Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | 41~60 | 41~60 | 100.1~ | Up to ±10mm | - | [Stainless Steel] SUS440C | 无电解镀镍 | Linear Ball | 15.1~20 | 60 | 60 | 196 | ±6.5 | - | 16 | - | 15 | 0.08 | 0.08 | 0.05 | Center | Up/Down | Disc Clamp [H] / Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | 41~60 | 41~60 | 100.1~ | Up to ±10mm | - | [Stainless Steel] SUS440C | 无电解镀镍 | Linear Ball | 15.1~20 | 60 | 60 | 196 | ±6.5 | - | 16 | - | 15 | 0.08 | 0.08 | 0.05 | Center | Top/Bottom, Right/Left | Disc Clamp [H] / Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | 41~60 | 41~60 | 100.1~ | Up to ±10mm | - | [Stainless Steel] SUS440C | 无电解镀镍 | Linear Ball | 15.1~20 | 60 | 60 | 196 | ±6.5 | - | 16 | - | 15 | 0.08 | 0.08 | 0.05 | Side | Standard | Disc Clamp [H] / Opposed Clamp [P] / Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | 41~60 | 41~60 | 100.1~ | Up to ±10mm | - | [Stainless Steel] SUS440C | 无电解镀镍 | Linear Ball | 15.1~20 | 60 | 60 | 196 | ±6.5 | - | 16 | - | 15 | 0.08 | 0.08 | 0.05 | Side | Right and Left | Disc Clamp [H] / Opposed Clamp [P] / Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | 41~60 | 41~60 | 100.1~ | Up to ±10mm | - | [Stainless Steel] SUS440C | 无电解镀镍 | Linear Ball | 15.1~20 | 60 | 60 | 196 | ±6.5 | - | 16 | - | 15 | 0.08 | 0.08 | 0.05 | Side | Up/Down | Disc Clamp [H] / Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | 41~60 | 41~60 | 100.1~ | Up to ±10mm | - | [Stainless Steel] SUS440C | 无电解镀镍 | Linear Ball | 15.1~20 | 60 | 60 | 196 | ±6.5 | - | 16 | - | 15 | 0.08 | 0.08 | 0.05 | Side | Top/Bottom, Right/Left | Disc Clamp [H] / Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | 61~90 | 61~90 | 100.1~ | Up to ±10mm | - | [Stainless Steel] SUS440C | 无电解镀镍 | Linear Ball | 15.1~20 | 70 | 70 | 225.4 | ±6.5 | - | 18 | - | 15 | 0.06 | 0.05 | 0.03 | Center | Standard | Disc Clamp [H] / Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | 61~90 | 61~90 | 100.1~ | Up to ±10mm | - | [Stainless Steel] SUS440C | 无电解镀镍 | Linear Ball | 15.1~20 | 70 | 70 | 225.4 | ±6.5 | - | 18 | - | 15 | 0.06 | 0.05 | 0.03 | Center | Right and Left | Disc Clamp [H] / Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | 61~90 | 61~90 | 100.1~ | Up to ±10mm | - | [Stainless Steel] SUS440C | 无电解镀镍 | Linear Ball | 15.1~20 | 70 | 70 | 225.4 | ±6.5 | - | 18 | - | 15 | 0.06 | 0.05 | 0.03 | Center | Up/Down | Disc Clamp [H] / Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | 61~90 | 61~90 | 100.1~ | Up to ±10mm | - | [Stainless Steel] SUS440C | 无电解镀镍 | Linear Ball | 15.1~20 | 70 | 70 | 225.4 | ±6.5 | - | 18 | - | 15 | 0.06 | 0.05 | 0.03 | Center | Top/Bottom, Right/Left | Disc Clamp [H] / Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | 61~90 | 61~90 | 100.1~ | Up to ±10mm | - | [Stainless Steel] SUS440C | 无电解镀镍 | Linear Ball | 15.1~20 | 70 | 70 | 225.4 | ±6.5 | - | 18 | - | 15 | 0.06 | 0.05 | 0.03 | Side | Standard | Disc Clamp [H] / Opposed Clamp [P] / Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | 61~90 | 61~90 | 100.1~ | Up to ±10mm | - | [Stainless Steel] SUS440C | 无电解镀镍 | Linear Ball | 15.1~20 | 70 | 70 | 225.4 | ±6.5 | - | 18 | - | 15 | 0.06 | 0.05 | 0.03 | Side | Right and Left | Disc Clamp [H] / Opposed Clamp [P] / Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | 61~90 | 61~90 | 100.1~ | Up to ±10mm | - | [Stainless Steel] SUS440C | 无电解镀镍 | Linear Ball | 15.1~20 | 70 | 70 | 225.4 | ±6.5 | - | 18 | - | 15 | 0.06 | 0.05 | 0.03 | Side | Up/Down | Disc Clamp [H] / Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | 61~90 | 61~90 | 100.1~ | Up to ±10mm | - | [Stainless Steel] SUS440C | 无电解镀镍 | Linear Ball | 15.1~20 | 70 | 70 | 225.4 | ±6.5 | - | 18 | - | 15 | 0.06 | 0.05 | 0.03 | Side | Top/Bottom, Right/Left | Disc Clamp [H] / Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | - | 61~90 | 61~90 | 100.1~ | ±10 to 30mm | - | [Stainless Steel] SUS440C | 无电解镀镍 | Linear Ball | 15.1~20 | 80 | 80 | 264.6 | ±12.5 | - | 20 | - | 20 | 0.04 | 0.04 | 0.02 | Center | Standard | Disc Clamp [H] / Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Digital Micrometer Head [D] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | - | 61~90 | 61~90 | 100.1~ | ±10 to 30mm | - | [Stainless Steel] SUS440C | 无电解镀镍 | Linear Ball | 15.1~20 | 80 | 80 | 264.6 | ±12.5 | - | 20 | - | 20 | 0.04 | 0.04 | 0.02 | Center | Right and Left | Disc Clamp [H] / Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Digital Micrometer Head [D] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | 61~90 | 61~90 | 100.1~ | ±10 to 30mm | - | [Stainless Steel] SUS440C | 无电解镀镍 | Linear Ball | 15.1~20 | 80 | 80 | 264.6 | ±12.5 | - | 20 | - | 20 | 0.04 | 0.04 | 0.02 | Center | Up/Down | Disc Clamp [H] / Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | 61~90 | 61~90 | 100.1~ | ±10 to 30mm | - | [Stainless Steel] SUS440C | 无电解镀镍 | Linear Ball | 15.1~20 | 80 | 80 | 264.6 | ±12.5 | - | 20 | - | 20 | 0.04 | 0.04 | 0.02 | Center | Top/Bottom, Right/Left | Disc Clamp [H] / Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | 61~90 | 61~90 | 100.1~ | ±10 to 30mm | - | [Stainless Steel] SUS440C | 无电解镀镍 | Linear Ball | 15.1~20 | 80 | 80 | 264.6 | ±12.5 | - | 20 | - | 20 | 0.04 | 0.04 | 0.02 | Side | Standard | Disc Clamp [H] / Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Digital Micrometer Head [D] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | 61~90 | 61~90 | 100.1~ | ±10 to 30mm | - | [Stainless Steel] SUS440C | 无电解镀镍 | Linear Ball | 15.1~20 | 80 | 80 | 264.6 | ±12.5 | - | 20 | - | 20 | 0.04 | 0.04 | 0.02 | Side | Right and Left | Disc Clamp [H] / Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | 61~90 | 61~90 | 100.1~ | ±10 to 30mm | - | [Stainless Steel] SUS440C | 无电解镀镍 | Linear Ball | 15.1~20 | 80 | 80 | 264.6 | ±12.5 | - | 20 | - | 20 | 0.04 | 0.04 | 0.02 | Side | Up/Down | Disc Clamp [H] / Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | 61~90 | 61~90 | 100.1~ | ±10 to 30mm | - | [Stainless Steel] SUS440C | 无电解镀镍 | Linear Ball | 15.1~20 | 80 | 80 | 264.6 | ±12.5 | - | 20 | - | 20 | 0.04 | 0.04 | 0.02 | Side | Top/Bottom, Right/Left | Disc Clamp [H] / Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | ~25 | ~25 | 30.1~50 | Up to ±10mm | Up to ±10mm | [Stainless Steel] SUS440C | 无电解镀镍 | Linear Ball | 20.1~25 | 25 | 25 | 38.2 | ±3.2 | ±3.2 | 24 | - | 30 | 3 | 2.2 | 3.00 | Center | Standard | Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | ~25 | ~25 | 30.1~50 | Up to ±10mm | Up to ±10mm | [Stainless Steel] SUS440C | 无电解镀镍 | Linear Ball | 20.1~25 | 25 | 25 | 38.2 | ±3.2 | ±3.2 | 24 | - | 30 | 3 | 2.2 | 3.00 | Center | Right and Left | Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | ~25 | ~25 | 30.1~50 | Up to ±10mm | Up to ±10mm | [Stainless Steel] SUS440C | 无电解镀镍 | Linear Ball | 20.1~25 | 25 | 25 | 38.2 | ±3.2 | ±3.2 | 24 | - | 30 | 3 | 2.2 | 3.00 | Side | Standard | Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | ~25 | ~25 | 30.1~50 | Up to ±10mm | Up to ±10mm | [Stainless Steel] SUS440C | 无电解镀镍 | Linear Ball | 20.1~25 | 25 | 25 | 38.2 | ±3.2 | ±3.2 | 24 | - | 30 | 3 | 2.2 | 3.00 | Side | Right and Left | Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | 26~40 | 26~40 | 50.1~100 | Up to ±10mm | Up to ±10mm | [Stainless Steel] SUS440C | 无电解镀镍 | Linear Ball | 30.1~35 | 40 | 40 | 95.2 | ±6.5 | ±6.5 | 32 | - | 30 | 0.63 | 0.7 | 0.63 | Center | Standard | Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | 26~40 | 26~40 | 50.1~100 | Up to ±10mm | Up to ±10mm | [Stainless Steel] SUS440C | 无电解镀镍 | Linear Ball | 30.1~35 | 40 | 40 | 95.2 | ±6.5 | ±6.5 | 32 | - | 30 | 0.63 | 0.7 | 0.63 | Center | Right and Left | Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | 26~40 | 26~40 | 50.1~100 | Up to ±10mm | Up to ±10mm | [Stainless Steel] SUS440C | 无电解镀镍 | Linear Ball | 30.1~35 | 40 | 40 | 95.2 | ±6.5 | ±6.5 | 32 | - | 30 | 0.63 | 0.7 | 0.63 | Side | Standard | Disc Clamp [H] / Opposed Clamp [P] / Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | 26~40 | 26~40 | 50.1~100 | Up to ±10mm | Up to ±10mm | [Stainless Steel] SUS440C | 无电解镀镍 | Linear Ball | 30.1~35 | 40 | 40 | 95.2 | ±6.5 | ±6.5 | 32 | - | 30 | 0.63 | 0.7 | 0.63 | Side | Right and Left | Disc Clamp [H] / Opposed Clamp [P] / Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | 41~60 | 41~60 | 100.1~ | Up to ±10mm | Up to ±10mm | [Stainless Steel] SUS440C | 无电解镀镍 | Linear Ball | 30.1~35 | 50 | 50 | 144.2 | ±6.5 | ±6.5 | 32 | - | 30 | 0.24 | 0.28 | 0.24 | Center | Standard | Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | 41~60 | 41~60 | 100.1~ | Up to ±10mm | Up to ±10mm | [Stainless Steel] SUS440C | 无电解镀镍 | Linear Ball | 30.1~35 | 50 | 50 | 144.2 | ±6.5 | ±6.5 | 32 | - | 30 | 0.24 | 0.28 | 0.24 | Center | Right and Left | Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | 41~60 | 41~60 | 100.1~ | Up to ±10mm | Up to ±10mm | [Stainless Steel] SUS440C | 无电解镀镍 | Linear Ball | 30.1~35 | 50 | 50 | 144.2 | ±6.5 | ±6.5 | 32 | - | 30 | 0.24 | 0.28 | 0.24 | Side | Standard | Disc Clamp [H] / Opposed Clamp [P] / Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | 41~60 | 41~60 | 100.1~ | Up to ±10mm | Up to ±10mm | [Stainless Steel] SUS440C | 无电解镀镍 | Linear Ball | 30.1~35 | 50 | 50 | 144.2 | ±6.5 | ±6.5 | 32 | - | 30 | 0.24 | 0.28 | 0.24 | Side | Right and Left | Disc Clamp [H] / Opposed Clamp [P] / Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | 41~60 | 41~60 | 100.1~ | Up to ±10mm | Up to ±10mm | [Stainless Steel] SUS440C | 无电解镀镍 | Linear Ball | 30.1~35 | 60 | 60 | 192.1 | ±6.5 | ±6.5 | 32 | - | 30 | 0.13 | 0.16 | 0.13 | Center | Standard | Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | 41~60 | 41~60 | 100.1~ | Up to ±10mm | Up to ±10mm | [Stainless Steel] SUS440C | 无电解镀镍 | Linear Ball | 30.1~35 | 60 | 60 | 192.1 | ±6.5 | ±6.5 | 32 | - | 30 | 0.13 | 0.16 | 0.13 | Center | Right and Left | Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | 41~60 | 41~60 | 100.1~ | Up to ±10mm | Up to ±10mm | [Stainless Steel] SUS440C | 无电解镀镍 | Linear Ball | 30.1~35 | 60 | 60 | 192.1 | ±6.5 | ±6.5 | 32 | - | 30 | 0.13 | 0.16 | 0.13 | Side | Standard | Disc Clamp [H] / Opposed Clamp [P] / Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | 41~60 | 41~60 | 100.1~ | Up to ±10mm | Up to ±10mm | [Stainless Steel] SUS440C | 无电解镀镍 | Linear Ball | 30.1~35 | 60 | 60 | 192.1 | ±6.5 | ±6.5 | 32 | - | 30 | 0.13 | 0.16 | 0.13 | Side | Right and Left | Disc Clamp [H] / Opposed Clamp [P] / Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | 61~90 | 61~90 | 100.1~ | Up to ±10mm | Up to ±10mm | [Stainless Steel] SUS440C | 无电解镀镍 | Linear Ball | 35.1~40 | 70 | 70 | 219.7 | ±6.5 | ±6.5 | 36 | - | 30 | 0.09 | 0.1 | 0.09 | Center | Standard | Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) | ||
- | 1 Piece(s) | 8 Day(s) or more | 10 | 61~90 | 61~90 | 100.1~ | Up to ±10mm | Up to ±10mm | [Stainless Steel] SUS440C | 无电解镀镍 | Linear Ball | 35.1~40 | 70 | 70 | 219.7 | ±6.5 | ±6.5 | 36 | - | 30 | 0.09 | 0.1 | 0.09 | Center | Right and Left | Standard [S] | Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N] | G (Standard) / R (For Clean Environment) |
Loading...Tải…
Basic InformationThông tin cơ bản
| Through Hole (Table Center Hole) | Not Provided |
|---|
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer toCác thông số kỹ thuật và kích thước của mã sản phẩm có thể không được bao phủ đầy đủ. Để biết chi tiết chính xác, hãy tham khảo manufacturer catalogsdanh mục nhà sản xuất ..
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy