Can linear guides or sliders be purchased separately?

Taking into account the accuracy of products, single slider models clearly indicated in the catalog can be purchased, and no others can be purchased.

Can the stainless steel guide rails be guaranteed not to rust?

Stainless steel is a product that has a certain antirust function compared to carbon steel, but it cannot be guaranteed that it will never rust. Depending on the operating environment, there may also be short-term rust.

What problems should be paid attention to when the linear guide is installed vertically?

Attention should be paid to prevent the slider from falling off and causing the balls to fall off during installation.

What does micro preloading in linear guide mean?

MISUMI's linear guides control the clearance by selecting the size of the internal ball. Through the negative clearance, the rigidity is improved and the elastic displacement is reduced. This is preloading. Generally speaking, the life and accuracy of the micro preloading type will be better than that of the standard clearance type.

Linear guide indicators include basic dynamic load rating and basic static load rating. Which indicator is the reference when selecting?

The basic dynamic load rating is used to calculate the rail life, and the basic static load rating is used to calculate the maximum allowable load.

Can the corresponding linear guide products be selected according to the third-party guide rail model?

MISUMI offers third-party brand replacement services, so as long as the third party product model is given, we can replace it with corresponding MISUMI model. For details, please contact the customer service email or call the customer service phone.

Can the rail or slider be repaired if it is damaged?

Repair service is not provided, re-purchase is recommended.

Can linear guide length be arbitrarily specified?

It can be specified arbitrarily. However, MISUMI linear guides are divided into length fixed type and length specified type, and in case of length specified type, the length dimensions for length fixed type cannot be specified.

(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.

Tel: 0222-361-1555 Email: cs@misumi.com.vn 8:00 - 17:00 (Mon - Sat)

ものづくりの、明日を支える。MISUMI-VONA 生産材コマースものづくりの、明日を支える。MISUMI-VONA 生産材コマース

Webcode Seach | Series: #CODE

Keyword suggestionsTừ khóa gợi ý

Part number suggestionsGợi ý mã sản phẩm

Discontinued Products

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 24/11/2024 to 6:00 (ICT) 25/11/2024. We apologize for the inconvenience.
[Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
[Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. 
[Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
[Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

ConfigureTạo

Part number has not been determine

(1 Part Numbers Available)

Configure Remaining SpecificationsĐịnh cấu hình các thông số còn lại

Part Number CompleteĐã hoàn thành

E-SMLGB12

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

Rail Length L(mm)
35

45

55

85

115

170

175

195

215

230

235

255

275

295

370

430

470

510

590
ClearTrống
Block Type
- Standard
  - Standard Block
ClearTrống
Assembly Height H(mm)
8

10

13

16
ClearTrống
Nominal Part Number
7

9

12

15
ClearTrống
Rail Type
- Standard Rail
ClearTrống
Set / Single Item
- Set
- Block Only
ClearTrống
Preload
- Clearance
  - Normal Clearance
ClearTrống
Accuracy Standards
- Standard Grade
ClearTrống
Material
- Carbon Steel
- Stainless Steel
ClearTrống
No. of Blocks
- 1
ClearTrống
Lubrication Type
- Lithium Grease Filled
ClearTrống
L Dimension Type
- Fixed Type
- Specified Type
ClearTrống
Applicable Linear Guide
C-MLG7 / E-GMLG7 / E-SMLG7

C-MLG9 / E-GMLG9 / E-SMLG9

C-MLG12 / E-GMLG12 / E-SMLG12

C-MLG15 / E-GMLG15 / E-SMLG15
ClearTrống
Block Material (Surface Treatment)
- Carbon Steel (Bearing Steel)
- Stainless Steel
ClearTrống
Rail Material (Surface Treatment)
- Carbon Steel (Bearing Steel)
- Stainless Steel
ClearTrống
Rail Surface Treatment
- Vacuum evaporated chrome plating
- none
ClearTrống
type
- C-MLG
- C-MLGB
- E-GMLG
- E-SMLG
ClearTrống
Lubrication Type
- Lubrication Applied
ClearTrống
CADCAD
- 2D
- 3D
ClearTrống

Days to ShipSố ngày giao hàng

Alltất cả các

Same day

5 Day(s) or Less

15 Day(s) or Less

16 Day(s) or Less
ClearTrống

Specify AlterationsChỉ định thay đổi

Miniature Linear Guides Standard (E-SMLGB12)

Volume Discount

Check FAQ of this product (8 items)

Brand :

MiSUMi Economy

Order Qty :
Price :

---
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

(i)
Caution

thận trọng

**RoHS Compliant is available for some part numbers.
Please contact with MISUMI for detail effective date.
Seri C-MLG may have rusty issue, seri E-GMLG have surface treatment, seri E-SMLG have material is SUS
For alteration is ZA or ZB, the leadtime maybe longer, please contact with machinery_bd@misumi.com.vn for more details.

Product Description

Miniature Linear Guides Standard
These linear guides or linear slides are an economy item, The price is cheaper than the MISUMI standard product.They offer a wide variety of sizes to choose from.
[Feature]
● Rail Length Minimum/Maximum (mm.): 170 and 345
● Assembly Height (mm.): 8, 10, 13 and 16
● Rail Type : Standard Rail
● Option: Set (Rail + Block) / Block only
● Material: Carbon Steel and Stainless Steel
[Application]
It is used in a variety of machines such as CNC machines, 3D printers, measuring instruments, and so on.
See more ...

Economy Miniature Linear Guide

MiniatureLinear GuidePrecision

- Customizable Rail Length For Versatile Applications

- Smooth And Precise Linear Motion

- Suitable For High Precision Equipment

- Available In Carbon Steel And Stainless Steel

- Cost-Effective Solution Without Compromising Performance

MISUMI Standard

Cheaper Price

Product Variety

3D CAD
3D CAD Support

Product Overview

Linear guide rails, also known as slide rails, linear guides, or linear slide rails, are used for linear reciprocating motion applications. They have a higher rated load than linear bearings while maintaining the same volume of moving components, as well as linear motion accuracy. They can also bear a certain amount of torque load, enabling high-precision linear movement under high load conditions.
Linear guide rails are used to support and guide moving parts, allowing them to move in a reciprocating linear motion along a specified direction. They are mainly used in mechanical structures that require high precision. The moving and fixed components of the linear guide rail do not use an intermediate medium, but instead employ rolling steel balls.

Product Comparison

■ Comparison with Similar MISUMI Product

	Similar MISUMI Product SSEB10－115	Economy Series C－GMLG9－115
Material	Stainless Steel	Carbon Steel
Hardness	56HRC up	58HRC up
Basic Rated Load C (Dynamic) (kN)	1.5	1.86
Basic Rated Load Co (Static) (kN)	2.5	2.55
Static Allowable Moment MA/MB (N・m)	5.1	7.35
Static Allowable Moment MC (N・m)	10.2	11.76
Height H Tolerance Difference (μm)	±20	±20
Height H Pair Variation Difference (μm)	15	40
Width N Tolerance Difference (μm)	±25	±25
Width N Pair Variation Difference (μm)	20	40
Running Parallelism Guarantee (μm)*	7	15
Preload Management	Y	N
Model No. Selection Reference	Height H Reference	Rail Width W_R Reference
RoHS10	Compliant	Non-compliant

*Running parallelism varies by rail length.

Dimensional Drawing

■ Material

Type	Material		Rail Surface Treatment	Hardness
	Guide Rail	Block
C－MLG	Bearing Steel	Stainless Steel	-	58-62HRC
E－GMLG			Vacuum evaporated chrome plating
E－SMLG	Stainless Steel		-	55-58HRC
C－MLGB	-	Stainless Steel	-	-

Specification Table

■Component Kit

Part Number		L (Specified Length)	Component Dimension (mm)			Block Dimension (mm)									Guide Rail Dimension (mm)
Type	Nominal WR		H	H₁	N	W	B	B₁	C	L₁	L₂	Gn	Mxℓ	H₂	WR	Hr	D	h	d	P
Normal Clearance Type	Nominal WR		H	H₁	N	W	B	B₁	C	L₁	L₂	Gn	Mxℓ	H₂	WR	Hr	D	h	d	P
E－GMLG (Rail:Bearing Steel) E－SMLG (Rail:Stainless Steel)	7	25~900	8	1.5	5	17	12	2.5	8	13.5	22.65	Φ1.2	M2×2.5	1.5	7	4.8	4.2	2.3	2.4	15
	9	35~900	10	2	5.5	20	15	2.5	10	18.9	29.60	Φ1.4	M3×3	1.8	9	6.5	6	3.5	3.5	20
	12	45~900	13	3	7.5	27	20	3.5	15	20.7	35.75	Φ2	M3×3.5	2.5	12	8	6	4.5	3.5	25
	15	70~900	16	4	8.5	32	25	3.5	20	26.7	43.60	M3	M3×4	3	15	10	6	4.5	3.5	40

■Single Block

Part Number		Block Dimension (mm)
Type	Nominal	W	B	B₁	L₁	L₂	C	M×ℓ	H₂	Gn
C－MLGB	7	17	12	2.5	12.5	25.34	8	M2×2.5	1.5	Φ1.2
	9	20	15	2.5	17.5	28.98	10	M3×3	1.8	Φ1.4
	12	27	20	3.5	20.1	33.9	15	M3×3.5	2.5	Φ2
	15	32	25	3.5	25.1	41.5	20	M3×4	3	M3

The dimensional tolerance for length L is ±1mm.

The dimensional tolerance for end distance E is ±0.5mm.

■ Allowable Load

Nominal	Basic Rated Load		Static Allowable Moment		Mass
Nominal	C (Dynamic) kN	Co (Static) kN	M_A・M_B N.m	M_C N.m	Blcok kg	Rail kg/m
7	0.98	1.24	2.84	4.7	0.01	0.22
9	1.86	2.55	7.35	11.76	0.016	0.38
12	2.84	3.92	13.72	25.48	0.034	0.65
15	4.61	5.59	21.56	45.08	0.059	1.06

■ Detailed dimension of L dimension specified type
Dimension L specified type cuts both ends of the rail equally. Refer to the table below for the number of mounting holes (M) of the rail at this time.
In addition, Dimension E's calculation formula is as follows
"E" calculation formula
Economic type Linear Guide Length Specified Type Dimension E Calculation Formula

Economic type Linear Guide Length Specified Type Dimension E Calculation Formula

Economy series Miniature Linear Guide - Standard Guide Type -

H (Nominal)	8 (7)	10 (9)	13 (12)	16 (15)	Number of mounting holes M
L	25～35	35～47	45～57	70～87	2
	36～50	48～67	58～82	88～127	3
	51～65	68～87	83～107	128～167	4
	66～80	88～107	108～132	168～207	5
	81～95	108～127	133～157	208～247	6
	96～110	128～147	158～182	248～287	7
	111～125	148～167	183～207	288～327	8
	126～140	168～187	208～232	328～367	9
	141～155	188～207	233～257	368～407	10
	156～170	208～227	258～282	408～447	11
	171～185	228～247	283～307	448～487	12
	186～200	248～267	308～332	488～527	13
	201～215	268～287	333～357	528～567	14
	216～230	288～307	358～382	568～607	15
	231～245	308～327	383～407	608～647	16
	246～260	328～347	408～432	648～687	17
	261～275	348～367	433～457	688～727	18
	276～290	368～387	458～482	728～767	19
	291～305	388～407	483～507	768～807	20
	306～320	408～427	508～532	808～847	21
	321～335	428～447	533～557	848～887	22
	336～350	448～467	558～582	888～900	23
	351～365	468～487	583～607	-	24
	366～380	488～507	608～632		25
	381～395	508～527	633～657		26
	396～410	528～547	658～682		27
	411～425	548～567	683～707		28
	426～440	568～587	708～732		29
	441～455	588～607	733～757		30
	456～470	608～627	758～782		31
	471～485	628～647	783～807		32
	486～500	648～667	808～832		33
	501～515	668～687	833～857		34
	516～530	688～707	858～882		35
	531～545	708～727	883～900		36
	546～560	728～747	-		37
	561～575	748～767			38
	576～590	768～787			39
	591～605	788～807			40
	606～620	808～827			41
	621～635	828～847			42
	636～650	848～867			43
	651～665	868～887			44
	666～680	888～900			45
	681～695	-			46
	696～710				47
	711～725				48
	726～740				49
	741～755				50
	756～770				51
	771～785				52
	786～800				53
	801～815				54
	816～830				55
	831～845				56
	846～860				57
	861～875				58
	876～890				59
	891～900				60
P	15	20	25	40

Alterations

Code

Spec.

Change to Tapped Holes

Ordering code: MC
Change counterbored holes for fixing a guide to tapped holes.

Nominal size	MC
7	M3
9,12	M4
15	M5

2-Block Specifications

1 block added to 1-block product to ship as 2 block item.

If the rail is too short to fit multiple blocks, the blocks will be shipped in a separate package.

3-Block Specifications

2 blocks added to 1-block product to ship as 3 block item.

If the rail is too short to fit multiple blocks, the blocks will be shipped in a separate package.

4-Block Specifications

3 blocks added to 1-block product to ship as 4 block item.

If the rail is too short to fit multiple blocks, the blocks will be shipped in a separate package.

Preload adjustment

Change Z0: zero preload to
ZF: Normal clearance
Z1: Light preload
Z2: Medium preload

Rail End Cut

Left End Cut
ES

Specify the edge distance in 0.5 mm increments. When the specified edge distance exceeds or is close to the hole spacing, cutting may result in hole breakage.

EB + ES = 2E. In cases where cutting is not feasible, distribute the dimensions evenly according to the standards.

Right End Cut
EB

*The precision of the Economy series products has been improved.

Precision Benchmark

●Dimensional Precision

Dimensional Precision Type	Precision Standard	Misumi
Miniature	Height H Tolerance	±40
	Height H Pair Variation	40
	Width N Tolerance	±40
	Width N Pair Variation	40

●Running Parallelism

Rail Length (mm)	Accuracy grade (μm)
Less than 50	12
50-80	13
80-125	15
125-200	15
200-250	16
250-315	17
315-400	18
400-500	19
500-630	20
630-800	22
800-900	23

[Running Parallelism]
The values in the table are measured after the slide rail is fixed on the base.
When moving the slider within the entire length of the slide rail, measure the change of the upper surface C of the slider relative to the bottom surface A of the slide rail, and the change of the reference surface D of the slider relative to the reference surface B of the slide rail.
When moving the sliding block within the entire length of the slide rail, measure the change of the upper surface C of the slider relative to the bottom surface A of the slide rail, and the change of the reference surface D of the slider relative to the reference surface B of the slide rail.

Product Features

Feature 1: New construction, greatly reducing noise and improving smoothness.
Feature 2: The slide rail and the slider are in contact with each other through the rolling ball, so the shaking is small, and it is suitable for equipment with precision requirements.
Feature 3: Due to a point-to-surface contact, the frictional resistance is small, and it can perform subtle movements to achieve high precision positioning of the device.
Feature 4: It has a large allowable load because the force on the rotating surface is dispersed due to the rolling groove of the ball.
Feature 5: It is suitable for high-speed motion because it is not easy to produce friction heat when operating and not easily deformed by heat.

Precautions

For normal use, the installation of the linear guide needs to meet the following four points:

① Whether the shape of the mounting surface produces interference
Whether the mounting surface produces interference

② Keep the flatness of the workpiece mounting surface at about 5μ, otherwise the slider will be slightly deformed
Flatness of MISUMI mounting surface

③ Whether the error values of guide parallelism and fitting height are within the allowable installation values
MISUMI parallelism error tolerance

④ Use the standard installation method
Installation method of linear guides

Click

here for the detailed installation method

Maintenance (supply of grease)
Grease forms an oil film on the surface of the linear guide ball and rolling surface to effectively reduce friction and prevent sintering.
Decrease and aging of grease will greatly affect the life of the linear guide, so please add grease at the right time according to the
service conditions.
MISUMI's linear guides are sealed with the greases listed below at the time of shipment, so they can be used directly.
Miniature: Lithium Soap based Grease
Recommended grease filling interval: Usually every 3 months
Depending on the operating environment, the grease injection interval must be shortened appropriately when the grease is aging and dirty.

Usage Method

■ About use
① MISUMI's linear guide is installed with a retainer. Although the ball is not easy to fall off when the slide block is removed, the ball may fall off if the slider is removed from the rail at high speed, or tilted into the slide rail. Please disassemble the slider with care.
② Be sure to avoid colliding the ball back groove cover, otherwise it will affect the ball cycling, resulting in poor sliding.
③ Economy series Miniature linear guide rail adopts bearing steel. If you have anti-rust requirements, please choose the Low Temp. Black Chrome Plating Surface Treatment or Stainless Steel SUS440C products.
MISUMI Miniature Linear Guide Slider Precautions

MISUMI Miniature Linear Guide Slider Precautions

■ About maintenance (supply of grease)
① Grease forms an oil film on the surface of the linear guide ball and rail surface to effectively reduce friction and prevent sintering.
Decrease and aging of grease will greatly affect the life of the linear guide, so please add grease at the right time according to the service conditions.
MISUMI's linear guides are sealed with the greases listed below at the time of shipment, so they can be used directly.
Miniature Linear Guide: Lithium Soap-based Grease (MULTEMP Grease PS2)
Medium· and Heavy Duty Linear Guide: Lithium Soap-based Grease (Showa Shell Petroleum Albania Grease S2)
② Recommended Grease Injection Interval:
Usually every 6 months.
For longer moving distance, 3 months, or when the moving distance exceeds 1000km within the time limit, the 1000km shall prevail.
*The above is the grease injection interval under the moving distance standard. Depending on the operating environment, the grease injection interval must be shortened appropriately when the grease is aging and dirty.

Example of Use

Mechanism Name: 4 times stroke slide
Feature 1: suitable for medium frequency driving and positioning.
Feature 2: transfer the light workpiece on the worktable according to 4 times the distance of the cylinder stroke.

For details, click

here

Application Industries

Medical		Smart phone

Robotics		Electronic & Electrical Appliances

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.Incomplete part number.
Please use left hand selections to complete a part number.

Loading...Tải…

: 30; 45; 60

Part Number
E-SMLGB12

Part Number	Price	Minimum Order Qty.	Volume Discount	Days to ShipSố ngày giao hàng	Rail Length L (mm)	Block Type	Assembly Height H (mm)	Nominal Part Number	Rail Type	Set / Single Item	Preload	Accuracy Standards	Material	No. of Blocks	Lubrication Type	Lubrication Type	L Dimension Type	Applicable Linear Guide	Block Material (Surface Treatment)	Rail Material (Surface Treatment)	Rail Surface Treatment
	164,647 VND	1 Piece(s)	Available	16 Day(s)	-	-	-	-	-	-	-	-	-	-	Lubrication Applied	-	-	-	-	-	-

Loading...Tải…

Basic InformationThông tin cơ bản

Ball Arrangement	Miniature Type	Retainer	N/A	Rolling Element	Ball

Please check the type/dimensions/specifications of the part E-SMLGB12 in the Miniature Linear Guides Standard series.Vui lòng kiểm tra kiểu/kích thước/thông số kỹ thuật của phần E-SMLGB12 trong chuỗi Miniature Linear Guides Standard.

The specifications and dimensions of some parts may not be fully covered. For exact details, refer toCác thông số kỹ thuật và kích thước của mã sản phẩm có thể không được bao phủ đầy đủ. Để biết chi tiết chính xác, hãy tham khảo manufacturer catalogsdanh mục nhà sản xuất ..

Frequently asked question (FAQ)FAQ

Question:Question: Can linear guides or sliders be purchased separately?: Answer:Answer: Taking into account the accuracy of products, single slider models clearly indicated in the catalog can be purchased, and no others can be purchased.
Question:Question: Can the stainless steel guide rails be guaranteed not to rust?: Answer:Answer: Stainless steel is a product that has a certain antirust function compared to carbon steel, but it cannot be guaranteed that it will never rust. Depending on the operating environment, there may also be short-term rust.
Question:Question: What problems should be paid attention to when the linear guide is installed vertically?: Answer:Answer: Attention should be paid to prevent the slider from falling off and causing the balls to fall off during installation.
Question:Question: What does micro preloading in linear guide mean?: Answer:Answer: MISUMI's linear guides control the clearance by selecting the size of the internal ball. Through the negative clearance, the rigidity is improved and the elastic displacement is reduced. This is preloading. Generally speaking, the life and accuracy of the micro preloading type will be better than that of the standard clearance type.
Question:Question: Linear guide indicators include basic dynamic load rating and basic static load rating. Which indicator is the reference when selecting?: Answer:Answer: The basic dynamic load rating is used to calculate the rail life, and the basic static load rating is used to calculate the maximum allowable load.
Question:Question: Can the corresponding linear guide products be selected according to the third-party guide rail model?: Answer:Answer: MISUMI offers third-party brand replacement services, so as long as the third party product model is given, we can replace it with corresponding MISUMI model. For details, please contact the customer service email or call the customer service phone.
Question:Question: Can the rail or slider be repaired if it is damaged?: Answer:Answer: Repair service is not provided, re-purchase is recommended.
Question:Question: Can linear guide length be arbitrarily specified?: Answer:Answer: It can be specified arbitrarily. However, MISUMI linear guides are divided into length fixed type and length specified type, and in case of length specified type, the length dimensions for length fixed type cannot be specified.

Check other FAQ (5 items) HideĐóng.

Products like this...

Part Number
C-MLG12-370
C-MLG12-45
C-MLG15-230
E-SMLGB15
E-SMLGB7
E-SMLGB9

Standard Unit Price	Minimum order quantity	Volume Discount	Days to ShipSố ngày giao hàng	Rail Length L (mm)	Block Type	Assembly Height H (mm)	Nominal Part Number	Rail Type	Set / Single Item	Preload	Accuracy Standards	Material	No. of Blocks	Lubrication Type	Lubrication Type	L Dimension Type	Applicable Linear Guide	Block Material (Surface Treatment)	Rail Material (Surface Treatment)	Rail Surface Treatment
379,106 VND	1 Piece(s)	Available	Same day	370	[Standard] Standard Block	13	12	Standard Rail	Set	[Clearance] Normal Clearance	Standard Grade	Carbon Steel	1	Lubrication Applied	Lithium Grease Filled	Fixed Type	-	Carbon Steel (Bearing Steel)	Carbon Steel (Bearing Steel)	none
182,998 VND	1 Piece(s)	Available	Same day	45	[Standard] Standard Block	13	12	Standard Rail	Set	[Clearance] Normal Clearance	Standard Grade	Carbon Steel	1	Lubrication Applied	Lithium Grease Filled	Fixed Type	-	Carbon Steel (Bearing Steel)	Carbon Steel (Bearing Steel)	none
307,064 VND	1 Piece(s)	Available	Same day	230	[Standard] Standard Block	16	15	Standard Rail	Set	[Clearance] Normal Clearance	Standard Grade	Carbon Steel	1	Lubrication Applied	Lithium Grease Filled	Fixed Type	-	Carbon Steel (Bearing Steel)	Carbon Steel (Bearing Steel)	none
243,627 VND	1 Piece(s)	Available	16 Day(s)	-	-	-	-	-	-	-	-	-	-	Lubrication Applied	-	-	-	-	-	-
145,169 VND	1 Piece(s)	Available	16 Day(s)	-	-	-	-	-	-	-	-	-	-	Lubrication Applied	-	-	-	-	-	-
153,744 VND	1 Piece(s)	Available	16 Day(s)	-	-	-	-	-	-	-	-	-	-	Lubrication Applied	-	-	-	-	-	-

Top of the page

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều

Tel:Số điện thoại:0222-361-1555
Fax:Số Fax:0222-361-2555
InquiryYêu cầu

MISUMI APP

Install MISUMI APP

MISUMI Vietnam Company Limited, Legal Representative: Tomohiro Watanabe,
phone: 0222-361-1555, e-mail: cs@misumi.com.vn, Enterprise Code: 0107514576,
Date of Issuance: 22 July 2016, Place of Issuance: Bac Ninh, Business Certificate No. 6573041568-KD dated 27 September 2016 issued by the People's Committee of Bac Ninh

Công ty TNHH MISUMI Việt Nam, Đại diện theo pháp luật: Tomohiro Watanabe,
Điện thoại: 0222-361-1555, e-mail: cs@misumi.com.vn, Mã số doanh nghiệp: 0107514576,
ngày cấp 22/7/2016, nơi cấp: Bắc Ninh, Giấy phép kinh doanh số: 6573041568-KD ngày cấp 27/9/2016 bởi UBND tỉnh Bắc Ninh

Miniature linear guide rail	Medium Load linear guide	Heavy Load linear guide

Typical model: SSEBZ10-55	Typical model: SVR24-280	Typical model: SXR24-280

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

How can we improve?

ConfigureTạo

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

Rail Length L(mm)

Block Type

Assembly Height H(mm)

Nominal Part Number

Rail Type

Set / Single Item

Preload

Accuracy Standards

Material

No. of Blocks

Lubrication Type

L Dimension Type

Applicable Linear Guide

Block Material (Surface Treatment)

Rail Material (Surface Treatment)

Rail Surface Treatment

type

Lubrication Type

CADCAD

Days to ShipSố ngày giao hàng

Specify AlterationsChỉ định thay đổi

Miniature Linear Guides Standard (E-SMLGB12)

Copy Part Number URL to Clipboard

(i) Caution thận trọng

Product Description

Economy Miniature Linear Guide

Part Number

Basic InformationThông tin cơ bản

Frequently asked question (FAQ)FAQ

Products like this...

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều

(i)
Caution

thận trọng