(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.

Tel. Tel: 0222-361-1555 Email: cs@misumi.com.vn 8:00 - 17:00 (Mon - Sat)
Webcode Seach | Series
#CODE
Keyword suggestionsTừ khóa gợi ý
Part number suggestionsGợi ý mã sản phẩm
Discontinued Products

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

  • Viewed
    Products     Sản phẩm
    đã xem     최근 본
    상품     查看产品 查看產品
  • My
    Components     Linh kiện
    của tôi     나의 부품 我的部件 我的部件
  • Cart
Recently Viewed Products
X
My Components
X
Cart item(s)
X
Loading...
  • Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 15/12/2024 to 5:00 (ICT) 16/12/2024. We apologize for the inconvenience.
  • [Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
    [Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. 
  • [Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
    [Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.

  • How can we improve?

    How can we improve?

    Comments
    Name (Optional)
    E-mail Address (Optional)
    Tel (Optional)

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
    Customer Privacy Policy

    Thank you for your cooperation.

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
    Please use the inquiry form.

    Customer Privacy Policy

ConfigureTạo

Clear AllQuet sạch tât cả

Part number has not been determine

(665 Part Numbers Available)
Configure Remaining SpecificationsĐịnh cấu hình các thông số còn lại

Part Number CompleteĐã hoàn thành

C-TBN415H075
loading

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

  • Belt Width (mm)(mm)

    • 19.1
    • 25.4
    • 38.1
    • 50.8

    ClearTrống

  • Belt Norminal Width (Inch)(Inch)

    • 0.75
    • 1
    • 1.5
    • 2

    ClearTrống

  • Circumference Length(mm)

    • 304.8
    • 368.3
    • 431.8
    • 469.9
    • 508
    • 533.4
    • 558.8
    • 571.5
    • 584.2
    • 596.9
    • 609.6
    • 622.3
    • 635
    • 647.7
    • 660.4
    • 685.8
    • 698.5
    • 711.2
    • 723.9
    • 736.6
    • 762
    • 787.4
    • 800.1
    • 812.8
    • 825.5
    • 838.2
    • 850.9
    • 863.6
    • 876.3
    • 889
    • 901.7
    • 914.4
    • 927.1
    • 939.8
    • 952.5
    • 965.2
    • 977.9
    • 990.6
    • 1003.30
    • 1016
    • 1028.7
    • 1041.4
    • 1054.1
    • 1066.8
    • 1079.5
    • 1092.2
    • 1104.9
    • 1117.6
    • 1130.3
    • 1143
    • 1168.4
    • 1181.1
    • 1193.8
    • 1206.5
    • 1219.2
    • 1231.9
    • 1244.6
    • 1257.30
    • 1270
    • 1295.4
    • 1308.1
    • 1320.80
    • 1333.5
    • 1346.2
    • 1371.6
    • 1384.3
    • 1397.00
    • 1422.4
    • 1435.10
    • 1447.8
    • 1473.2
    • 1485.9
    • 1498.6
    • 1524
    • 1536.7
    • 1549.40
    • 1562.1
    • 1574.8
    • 1587.5
    • 1600.2
    • 1625.6
    • 1638.3
    • 1651
    • 1663.7
    • 1676.4
    • 1701.8
    • 1727.2
    • 1752.6
    • 1778
    • 1803.40
    • 1828.8
    • 1841.5
    • 1854.2
    • 1879.6
    • 1905
    • 1930.4
    • 1955.8
    • 1981.2
    • 2006.6
    • 2032
    • 2057.4
    • 2082.8
    • 2108.2
    • 2133.6
    • 2159
    • 2184.4
    • 2209.8
    • 2235.2
    • 2260.6
    • 2286
    • 2311.4
    • 2336.8
    • 2362.2
    • 2387.6
    • 2413
    • 2438.4
    • 2489.20
    • 2501.9
    • 2540
    • 2590.8
    • 2603.5
    • 2667.00
    • 2743.2
    • 2794
    • 2844.8
    • 2870.2
    • 2882.9
    • 2895.60
    • 2921.00
    • 2946.4
    • 2997.2
    • 3048
    • 3149.6
    • 3175
    • 3200.40
    • 3225.8
    • 3302
    • 3365.5
    • 3429
    • 3556
    • 3657.60
    • 3683
    • 3810
    • 3835.40
    • 3860.8
    • 3937
    • 3962.4
    • 4064
    • 4191
    • 4267.2
    • 4318
    • 4445
    • 4572
    • 4699.00
    • 4826
    • 5334.0

    ClearTrống

  • Number of Teeth

    • 24
    • 29
    • 34
    • 37
    • 40
    • 42
    • 44
    • 45
    • 46
    • 47
    • 48
    • 49
    • 50
    • 51
    • 52
    • 54
    • 55
    • 56
    • 57
    • 58
    • 60
    • 62
    • 63
    • 64
    • 65
    • 66
    • 67
    • 68
    • 69
    • 70
    • 71
    • 72
    • 73
    • 74
    • 75
    • 76
    • 77
    • 78
    • 79
    • 80
    • 81
    • 82
    • 83
    • 84
    • 85
    • 86
    • 87
    • 88
    • 89
    • 90
    • 92
    • 93
    • 94
    • 95
    • 96
    • 97
    • 98
    • 99
    • 100
    • 102
    • 103
    • 104
    • 105
    • 106
    • 108
    • 109
    • 110
    • 112
    • 113
    • 114
    • 116
    • 117
    • 118
    • 120
    • 121
    • 122
    • 123
    • 124
    • 125
    • 126
    • 128
    • 129
    • 130
    • 131
    • 132
    • 134
    • 136
    • 138
    • 140
    • 142
    • 144
    • 145
    • 146
    • 148
    • 150
    • 152
    • 154
    • 156
    • 158
    • 160
    • 162
    • 164
    • 166
    • 168
    • 170
    • 172
    • 174
    • 176
    • 178
    • 180
    • 182
    • 184
    • 186
    • 188
    • 190
    • 192
    • 196
    • 197
    • 200
    • 204
    • 205
    • 210
    • 216
    • 220
    • 224
    • 226
    • 227
    • 228
    • 230
    • 232
    • 236
    • 240
    • 248
    • 250
    • 252
    • 254
    • 260
    • 265
    • 270
    • 280
    • 288
    • 290
    • 300
    • 302
    • 304
    • 310
    • 312
    • 320
    • 330
    • 336
    • 340
    • 350
    • 360
    • 370
    • 380
    • 420

    ClearTrống

  • type

    • C-TBN□□□H

    ClearTrống

  • CADCAD

    • 2D
    • 3D

    ClearTrống

Days to ShipSố ngày giao hàng

    • Alltất cả các
    • Same day
    • 8 Day(s) or Less
    • 9 Day(s) or Less
    • 13 Day(s) or Less

    ClearTrống

Specify AlterationsChỉ định thay đổi

Timing Belts H (Part Number)

Timing Belts H
  • Sale
  • Until 31/12/2024
  • Volume Discount
Check FAQ of this product (7 items)
You can add up to 6 items per a category to the compare list.

Brand :

MISUMI

MiSUMi Economy

MISUMI

Filter By :
  • All
  • Sale Items
Part Number :
665 Part Numbers Available

C-TBN415H075 SALE

C-TBN415H100 SALE

C-TBN415H150 SALE

C-TBN415H200 SALE

C-TBN420H075 SALE

C-TBN420H100 SALE

C-TBN420H150 SALE

C-TBN420H200 SALE

C-TBN425H075 SALE

C-TBN425H100 SALE

C-TBN425H150 SALE

C-TBN425H200 SALE

C-TBN430H075 SALE

C-TBN430H100 SALE

C-TBN430H150 SALE

C-TBN430H200 SALE

C-TBN435H075 SALE

C-TBN435H100 SALE

C-TBN435H150 SALE

C-TBN435H200 SALE

C-TBN415H075
C-TBN415H075

Copy Part Number URL to Clipboard

The part number URL has been copied into your clipboard.

Close

loading
    • From :
      20,021VND/Unit
  • Order Qty :
  • Total Price :
    ---
  • Days to ship :
    ---

Select part number to Order Now/ Add to Cart

(i)

Caution

thận trọng

  • **RoHS Compliant is available for some part numbers.
    Please contact with MISUMI for detail effective date.

CAD Download
My Components
My Components
Similar ProductsSimilar Products
Product DetailProduct Detail

Product Description

RoHS Compliant Product



Economy H-Type Timing Belt

Quiet OperationCustomizableChloroprene Material

- With a wide range of belt lengths and widths, you can tailor the belt to perfectly match your specific equipment needs.

- Constructed with high-quality chloroprene rubber, these belts excel in resisting abrasion, oil, and grease, ensuring extended service life even in demanding environments.

- The glass fiber reinforced core provides exceptional strength and tensile strength, preventing belt elongation and slippage, resulting in consistent power transmission.

- The accurately designed trapezoidal tooth profile guarantees smooth and efficient power transmission, minimizing noise and vibration for optimal performance.

- Engineered to function reliably in temperatures ranging from -30°C to 90°C, these belts offer versatility across various operating conditions.

Economy H-Type Timing Belt
MISUMI Economy Logo

MISUMI Standard
MISUMI Standard

Cheaper Price
Cheaper Price

Product Variety
Product Variety

3D CAD
3D CAD Support


Product Overview

Usually, timing pulleys and timing belt are widely used to design mechanisms for transmitting rotational power generated by motors.
Driving and transmission are realized through the engagement between the teeth of timing pulleys and timing belts.
Local production in China delivers MISUMI quality at low price.

Dimensional Drawing

MISUMI Complete specifications Factory direct sales Original quality

■ Material/Specification Table
timing belt Material
① Tooth surface protection layerNylon canvas
② Tooth rubberChloroprene
③ Core wireGlass Fiber
Specifications Overview
TypesTooth pitch2θLrhHRrRaUnit weight
g/m (Width: 10mm)
H12.740°6.122.294.31140
timing beltPlease note that the meaning of the timing belt number of toothed timing belt varies with type.
 The belt circumference length of H (inch size) is the belt number.
timing beltTiming belt circumference length is core wire length.
timing beltC-TBN timing belt operating temperature range: -30 to 90 ℃.
timing beltThe model engraved on the back of the product is the manufacturer model.
timing beltMISUMI makes no commitment to this product brand.
timing beltFor the transmission capacity and calculation and design method of economy series timing belt, please refer to the national standard (GB) design manual.
 
Specification Table
■ Specification Table
Please order after selecting part number and parameters according to the selection steps to .
Ordering Example Part Number (TypeBelt Number Nominal Belt Width)
 C-TBN515H075

■ C-TBN
Tooth profile H (Pitch: 12.7mm)
Part NumberBelt
Nominal Width		Number of TeethBelt Circumference Length
(mm)
TypeBelt Number
C-TBN60H75
(19.1mm)

100
(25.4mm)

150
(38.1mm)

200
(50.8mm)		12152.40
120H24304.80
145H29368.30
170H34431.80
185H37469.90
200H40508.00
205H41520.70
210H42533.40
220H44558.80
225H45571.50
230H46584.20
235H47596.90
240H48609.60
245H49622.30
250H50635.00
255H51647.70
260H52660.40
270H54685.80
275H55698.50
280H56711.20
285H57723.90
290H58736.60
300H60762.00
305H61774.70
310H62787.40
315H63800.10
320H64812.80
325H65825.50
330H66838.20
335H67850.90
340H68863.60
345H69876.30
350H70889.00
355H71901.70
360H72914.40
365H73927.10
370H74939.80
375H75952.50
380H76965.20
385H77977.90
390H78990.60
395H791003.30
400H801016.00
405H811028.70
410H821041.40
415H831054.10
420H841066.80
425H851079.50
430H861092.20
435H871104.90
440H881117.60
445H891130.30
450H901143.00
460H921168.40
465H931181.10
470H941193.80
475H951206.50
480H961219.20
485H971231.90
490H981244.60
495H991257.30
500H1001270.00
510H1021295.40
515H1031308.10
520H1041320.80
525H1051333.50
530H1061346.20
540H1081371.60
545H1091384.30
550H1101397.00
555H1111409.70
560H1121422.40
565H1131435.10
570H1141447.80
580H1161473.20
585H1171485.90
590H1181498.60
600H1201524.00
605H1211536.70
610H1221549.40
615H1231562.10
620H1241574.80
625H1251587.50
630H1261600.20
640H1281625.60
645H1291638.30
650H1301651.00
660H1321676.40
670H1341701.80
680H1361727.20
690H1381752.60
700H1401778.00
710H1421803.40
720H1441828.80
725H1451841.50
730H1461854.20
740H1481879.60
750H1501905.00
760H1521930.40
770H1541955.80
780H1561981.20
785H1571993.90
790H1582006.60
800H1602032.00
810H1622057.40
820H1642082.80
830H1662108.20
840H1682133.60
850H1702159.00
860H1722184.40
870H1742209.80
880H1762235.20
900H1802286.00
910H1822311.40
920H1842336.80
930H1862362.20
940H1882387.60
950H1902413.00
960H1922438.40
980H1962489.20
985H1972501.90
1000H2002540.00
1020H2042590.80
1050H2102667.00
1070H2142717.80
1080H2162743.20
1100H2202794.00
1120H2242844.80
1130H2262870.20
1135H2272882.90
1140H2282895.60
1150H2302921.00
1160H2322946.40
1180H2362997.20
1200H2403048.00
1240H2483149.60
1250H2503175.00
1260H2523200.40
1270H2543225.80
1285H2573263.90
1300H2603302.00
1325H2653365.50
1350H2703429.00
1360H2723454.40
1400H2803556.00
1440H2883657.60
1450H2903683.00
1460H2923708.40
1500H3003810.00
1510H3023835.40
1550H3103937.00
1560H3123962.40
1600H3204064.00
1630H3264140.20
1650H3304191.00
1680H3364267.20
1700H3404318.00
1750H3504445.00
1780H3564521.20
1800H3604572.00
1850H3704699.00
1900H3804826.00
1950H3904953.00
2100H4205334.00

Product Features

S type circular tooth profile economy series timing belt is made of rubber, featuring deviation prevention and wear resistance■ S type circular tooth profile rubber timing belt (S2M/S3M/S5M/S8M/S14M)
Feature 1: Reasonable semi-circular arc tooth profile design can provide higher torque to adapt to high load transmission.
Feature 2: timing belt Reduce the noise generated by high-speed operation.
Feature 3: Tooth peak changes under force, ensuring a longer life than conventional circular tooth profile teeth.
Feature 4: Have certain conductivity
Feature 5: Operating Temperature Range: -30 to 90℃.
Features of P type domestic high-accuracy circular tooth profile timing belt■ P type circular tooth profile rubber timing belt (P5M/P8M)
Feature 1: Reasonable semi-circular arc tooth profile design can provide higher torque to adapt to high load transmission.
Feature 2: Special concave tooth peak design, better reducing noise generated by high-speed operation.
Feature 3: Tooth peak changes under force, ensuring greater accuracy than conventional circular tooth profile teeth.
Feature 4: Have certain conductivity
Feature 5: timing belt Operating Temperature Range: -25 to 80℃.
MXL, XL, L, H trapezoidal tooth profile timing belts are suitable for light load transmission and driving■ Trapezoidal tooth profile rubber timing belt (MXL/XL/H/T5/T10)
Feature 1: Suitable for light load transmission, standard torque driving.
Feature 2: Tooth rubber uses chloroprene to protect core wire, providing excellent bending fatigue resistance, heat resistance, oil resistance
Feature 3: Ideal choice of economical and maintenance-free alternative to traditional transmission method.
Feature 4: Have certain conductivity
Feature 5: timing belt Operating Temperature Range: -30 to 90℃ (MXL/XL/L/H), 0 to 80℃ (T5/T10)

Example of Use

Usage Method Example DrawingInstructions for use of timing wheel and timing belt
The TIMING BELT is installed on the motor and the rotating shaft to transmit the rotational force① Driving (The driven wheel is driven by the driving wheel for transmission)
Transmission belt, used for repeated motion with the object not rotating and high requirements on positioning accuracy② Transmission (Used for repeated motion with the object not rotating and high requirements on positioning accuracy)
Usage Method Example DrawingInstructions for use of timing wheel and timing belt
Plates are conveyed by two timing toothed belts③ Conveyance (Plates are conveyed by two timing toothed belts)
Usage method and example for conveyor belt lifting, repeated positioning motion④ Traction transmission (Workpieces are clamped and transmitted by the belt)

Usage Method

■ Installation method for timing belt transmission
①Turn off the power supply, remove the protective cover, loosen the motor assembly bolts, move the motor so that the belt is loose enough. The timing belt can be removed without prying. Never try to pry the belt down.
②Remove the old belt and check for abnormal wear. Excessive wear may mean that there are problems in the design or maintenance of the transmission device.
③Choose the right timing belt to replace.
④To clean the timing belt and pulley, wipe with a cloth dipped in a small amount of non-volatile liquid. Soaking in detergent or scrubbing the belt with detergent is not advisable. To remove grease, it is also undesirable to wipe with sandpaper or scratch with a sharp object. The belt must be kept dry before installation and use.
⑤Check the pulley for abnormal wear or cracks. If the wear is excessive, the pulley must be replaced.
⑥Check whether the pulley is linearly symmetrical. Linear symmetry of the pulley is essential for the operation of the timing belt, especially the timing belt transmission device.
Asymmetry of the pulley is shown as follows:
 Usage method Installation guide Complete selection Fit installation
⑦Check the remaining transmission device components, such as bearings and bushings, for symmetry, durability, lubrication and other conditions.
⑧Install a new timing belt on the pulley. Never pry or use too much force.
⑨Tighten to narrow the center distance of the transmission device until the tension tester detects that the timing belt tension is appropriate. Turn the driving wheel several times with your hands. Re-test tension.
⑩Tighten the assembly timing belt of the motor and correct the torque. Since any change in the center distance of the transmission device during operation will result in poor belt performance, it is important to ensure that all transmission components have been tightened.
⑪Start the device and observe the timing belt performance to see if there is abnormal vibration, and listen carefully if there is abnormal noise. It is best to turn off the machine and check the conditions of the bearing and motor.

Precautions

① Do not bend the timing belt by force.
It is strictly forbidden to bend the belt, which easily causes breakage
② Do not use in direct contact with water, solvent, oil, acid, alkali, UV, ozone, etc.
Do not directly contact water in operating environmentDo not use in acidic environmentsAvoid contact with alkaline solventsTry not to touch oil liquidsAvoid exposure to strong UV rays
③ Please timing belt avoid using or keeping at extreme high or low temperatures beyond the operating temperature range, or in humid environments.
④ During installation and maintenance, be sure to cut off the power supply and confirm that the machine is completely stopped before proceeding.
⑤ When there may be impurities, be sure to set the guard.

Application Industries

Food Semiconductor Smart phone
It is widely used in food transport and transfer Industry Application Industry Semiconductor Smartphone 3C IPHONE Huawei
Automotive Electronic & Electrical Appliances Medical
Application in automotive assembly production line Method of usage in electronic & electrical and home appliances industry Widely used in medical equipment, blood machines and other related equipment in the biomedical industry

Related Products

High Torque Timing Belt Pulleys S2M Type Flat Timing Belt For General Use Economy Series Toothed Timing Belt
S2M S3M S5M S8M S14M Type
TIMING PULLY High torque timing pulley MISUMI brand Pulley manufacturer S2M FLATBELT Flat belt Conveyor belt Transportation belt MISUMI brand Economy series Domestic S type tooth profile timing belt Low price Short delivery time
Reference timing belt model: HTPA48S2M040-B-N10 Reference timing belt model: HBLT350-4.23 Reference timing belt model: C-HTBN400S2M-40
Reason for recommendation: high transmission power, short delivery time, multiple types Reason for recommendation: intended use for transmission, rich variety of specifications and types Reason for recommendation: rich variety of specifications, high cost performance

Part Number 

  • Incomplete part number.
    Please use left hand selections to complete a part number.    Incomplete part number.
    Please use left hand selections to complete a part number.
Loading...Tải…
30
60
90
  1. << PrevTrước
  2. 3
  3. 4
  4. 5
  5. 6
  6. 7
  7. NextKế tiếp >>
Part Number
C-TBN415H075SALE
C-TBN415H100SALE
C-TBN415H150SALE
C-TBN415H200SALE
C-TBN420H075SALE
C-TBN420H100SALE
C-TBN420H150SALE
C-TBN420H200SALE
C-TBN425H075SALE
C-TBN425H100SALE
C-TBN425H150SALE
C-TBN425H200SALE
C-TBN430H075SALE
C-TBN430H100SALE
C-TBN430H150SALE
C-TBN430H200SALE
C-TBN435H075SALE
C-TBN435H100SALE
C-TBN435H150SALE
C-TBN435H200SALE
C-TBN440H075SALE
C-TBN440H100SALE
C-TBN440H150SALE
C-TBN440H200SALE
C-TBN445H075SALE
C-TBN445H100SALE
C-TBN445H150SALE
C-TBN445H200SALE
C-TBN450H075SALE
C-TBN450H100SALE
C-TBN450H150SALE
C-TBN450H200SALE
C-TBN460H075SALE
C-TBN460H100SALE
C-TBN460H150SALE
C-TBN460H200SALE
C-TBN465H075SALE
C-TBN465H100SALE
C-TBN465H150SALE
C-TBN465H200SALE
C-TBN470H075SALE
C-TBN470H100SALE
C-TBN470H150SALE
C-TBN470H200SALE
C-TBN475H075SALE
C-TBN475H100SALE
C-TBN475H150SALE
C-TBN475H200SALE
C-TBN480H075SALE
C-TBN480H100SALE
C-TBN480H150SALE
C-TBN480H200SALE
C-TBN485H075SALE
C-TBN485H100SALE
C-TBN485H150SALE
C-TBN485H200SALE
C-TBN490H075SALE
C-TBN490H100SALE
C-TBN490H150SALE
C-TBN490H200SALE
C-TBN495H075SALE
C-TBN495H100SALE
C-TBN495H150SALE
C-TBN495H200SALE
C-TBN500H075SALE
C-TBN500H100SALE
C-TBN500H150SALE
C-TBN500H200SALE
C-TBN510H075SALE
C-TBN510H100SALE
C-TBN510H150SALE
C-TBN510H200SALE
C-TBN515H075SALE
C-TBN515H100SALE
C-TBN515H150SALE
C-TBN515H200SALE
C-TBN520H075SALE
C-TBN520H100SALE
C-TBN520H150SALE
C-TBN520H200SALE
C-TBN525H075SALE
C-TBN525H100SALE
C-TBN525H150SALE
C-TBN525H200SALE
C-TBN530H075SALE
C-TBN530H100SALE
C-TBN530H150SALE
C-TBN530H200SALE
C-TBN540H075SALE
C-TBN540H100SALE
Part NumberPriceMinimum Order Qty.Volume DiscountDays to ShipSố ngày giao hàngBelt Width (mm)
(mm) 		Belt Norminal Width (Inch)
(Inch) 		Circumference Length
(mm) 		Number of Teeth

98,006 VND

83,305 VND

4 Piece(s) Available 8 Day(s) 19.10.751054.183

128,309 VND

109,063 VND

4 Piece(s) Available 8 Day(s) 25.411054.183

189,061 VND

160,702 VND

4 Piece(s) Available 8 Day(s) 38.11.51054.183

249,705 VND

212,249 VND

4 Piece(s) Available 8 Day(s) 50.821054.183

110,957 VND

94,313 VND

4 Piece(s) Available 8 Day(s) 19.10.751066.884

145,211 VND

123,429 VND

4 Piece(s) Available 8 Day(s) 25.411066.884

214,398 VND

182,238 VND

4 Piece(s) Available 8 Day(s) 38.11.51066.884

283,618 VND

241,075 VND

4 Piece(s) Available 8 Day(s) 50.821066.884

83,399 VND

70,889 VND

4 Piece(s) Available 8 Day(s) 19.10.751079.585

108,589 VND

92,301 VND

4 Piece(s) Available 8 Day(s) 25.411079.585

159,354 VND

135,451 VND

4 Piece(s) Available 8 Day(s) 38.11.51079.585

210,155 VND

178,632 VND

4 Piece(s) Available 8 Day(s) 50.821079.585

113,392 VND

96,383 VND

4 Piece(s) Available 8 Day(s) 19.10.751092.286

148,569 VND

126,284 VND

4 Piece(s) Available 8 Day(s) 25.411092.286

219,305 VND

186,409 VND

4 Piece(s) Available 8 Day(s) 38.11.51092.286

290,149 VND

246,627 VND

4 Piece(s) Available 8 Day(s) 50.821092.286

102,349 VND

86,997 VND

4 Piece(s) Available 8 Day(s) 19.10.751104.987

134,138 VND

114,017 VND

4 Piece(s) Available 8 Day(s) 25.411104.987

197,782 VND

168,115 VND

4 Piece(s) Available 8 Day(s) 38.11.51104.987

261,468 VND

222,248 VND

4 Piece(s) Available 8 Day(s) 50.821104.987

86,014 VND

73,112 VND

4 Piece(s) Available 8 Day(s) 19.10.751117.688

112,122 VND

95,304 VND

4 Piece(s) Available 8 Day(s) 25.411117.688

164,689 VND

139,986 VND

4 Piece(s) Available 8 Day(s) 38.11.51117.688

217,292 VND

184,698 VND

4 Piece(s) Available 8 Day(s) 50.821117.688

86,967 VND

73,922 VND

4 Piece(s) Available 8 Day(s) 19.10.751130.389

113,357 VND

96,353 VND

4 Piece(s) Available 8 Day(s) 25.411130.389

166,525 VND

141,546 VND

4 Piece(s) Available 8 Day(s) 38.11.51130.389

219,729 VND

186,770 VND

4 Piece(s) Available 8 Day(s) 50.821130.389

118,337 VND

100,586 VND

4 Piece(s) Available 8 Day(s) 19.10.75114390

155,100 VND

131,835 VND

4 Piece(s) Available 8 Day(s) 25.41114390

229,195 VND

194,816 VND

4 Piece(s) Available 8 Day(s) 38.11.5114390

303,357 VND

257,853 VND

4 Piece(s) Available 8 Day(s) 50.82114390

107,823 VND

91,650 VND

4 Piece(s) Available 8 Day(s) 19.10.751168.492

141,520 VND

120,292 VND

4 Piece(s) Available 8 Day(s) 25.411168.492

208,803 VND

177,483 VND

4 Piece(s) Available 8 Day(s) 38.11.51168.492

276,016 VND

234,614 VND

4 Piece(s) Available 8 Day(s) 50.821168.492

122,045 VND

103,738 VND

4 Piece(s) Available 8 Day(s) 19.10.751181.193

160,045 VND

136,038 VND

4 Piece(s) Available 8 Day(s) 25.411181.193

236,611 VND

201,119 VND

4 Piece(s) Available 8 Day(s) 38.11.51181.193

313,247 VND

266,260 VND

4 Piece(s) Available 8 Day(s) 50.821181.193

91,454 VND

77,736 VND

4 Piece(s) Available 8 Day(s) 19.10.751193.894

119,293 VND

101,399 VND

4 Piece(s) Available 8 Day(s) 25.411193.894

175,500 VND

149,175 VND

4 Piece(s) Available 8 Day(s) 38.11.51193.894

231,706 VND

196,950 VND

4 Piece(s) Available 8 Day(s) 50.821193.894

111,108 VND

94,442 VND

4 Piece(s) Available 8 Day(s) 19.10.751206.595

145,900 VND

124,015 VND

4 Piece(s) Available 8 Day(s) 25.411206.595

215,373 VND

183,067 VND

4 Piece(s) Available 8 Day(s) 38.11.51206.595

284,846 VND

242,119 VND

4 Piece(s) Available 8 Day(s) 50.821206.595

125,755 VND

106,892 VND

4 Piece(s) Available 8 Day(s) 19.10.751219.296

164,989 VND

140,241 VND

4 Piece(s) Available 8 Day(s) 25.411219.296

244,027 VND

207,423 VND

4 Piece(s) Available 8 Day(s) 38.11.51219.296

323,135 VND

274,665 VND

4 Piece(s) Available 8 Day(s) 50.821219.296

94,104 VND

79,988 VND

4 Piece(s) Available 8 Day(s) 19.10.751231.997

122,895 VND

104,461 VND

4 Piece(s) Available 8 Day(s) 25.411231.997

180,870 VND

153,740 VND

4 Piece(s) Available 8 Day(s) 38.11.51231.997

238,806 VND

202,985 VND

4 Piece(s) Available 8 Day(s) 50.821231.997

128,227 VND

108,993 VND

4 Piece(s) Available 8 Day(s) 19.10.751244.698

168,309 VND

143,063 VND

4 Piece(s) Available 8 Day(s) 25.411244.698

248,974 VND

211,628 VND

4 Piece(s) Available 8 Day(s) 38.11.51244.698

329,669 VND

280,219 VND

4 Piece(s) Available 8 Day(s) 50.821244.698

129,462 VND

110,043 VND

4 Piece(s) Available 8 Day(s) 19.10.751257.3099

169,935 VND

144,445 VND

4 Piece(s) Available 8 Day(s) 25.411257.3099

251,444 VND

213,727 VND

4 Piece(s) Available 8 Day(s) 38.11.51257.3099

332,988 VND

283,040 VND

4 Piece(s) Available 8 Day(s) 50.821257.3099

130,768 VND

111,153 VND

4 Piece(s) Available 8 Day(s) 19.10.751270100

171,595 VND

145,856 VND

4 Piece(s) Available 8 Day(s) 25.411270100

253,987 VND

215,889 VND

4 Piece(s) Available 8 Day(s) 38.11.51270100

336,271 VND

285,830 VND

4 Piece(s) Available 8 Day(s) 50.821270100

133,239 VND

113,253 VND

4 Piece(s) Available 8 Day(s) 19.10.751295.4102

174,878 VND

148,646 VND

4 Piece(s) Available 8 Day(s) 25.411295.4102

258,894 VND

220,060 VND

4 Piece(s) Available 8 Day(s) 38.11.51295.4102

342,876 VND

291,445 VND

4 Piece(s) Available 8 Day(s) 50.821295.4102

99,544 VND

84,612 VND

4 Piece(s) Available 8 Day(s) 19.10.751308.1103

130,103 VND

110,588 VND

4 Piece(s) Available 8 Day(s) 25.411308.1103

191,643 VND

162,897 VND

4 Piece(s) Available 8 Day(s) 38.11.51308.1103

253,219 VND

215,236 VND

4 Piece(s) Available 8 Day(s) 50.821308.1103

135,715 VND

115,358 VND

4 Piece(s) Available 8 Day(s) 19.10.751320.80104

178,200 VND

151,470 VND

4 Piece(s) Available 8 Day(s) 25.411320.80104

263,838 VND

224,262 VND

4 Piece(s) Available 8 Day(s) 38.11.51320.80104

349,409 VND

296,998 VND

4 Piece(s) Available 8 Day(s) 50.821320.80104

101,311 VND

86,114 VND

4 Piece(s) Available 8 Day(s) 19.10.751333.5105

132,433 VND

112,568 VND

4 Piece(s) Available 8 Day(s) 25.411333.5105

195,176 VND

165,900 VND

4 Piece(s) Available 8 Day(s) 38.11.51333.5105

257,991 VND

219,292 VND

4 Piece(s) Available 8 Day(s) 50.821333.5105

138,184 VND

117,456 VND

4 Piece(s) Available 8 Day(s) 19.10.751346.2106

181,483 VND

154,261 VND

4 Piece(s) Available 8 Day(s) 25.411346.2106

268,785 VND

228,467 VND

4 Piece(s) Available 8 Day(s) 38.11.51346.2106

356,050 VND

302,643 VND

4 Piece(s) Available 8 Day(s) 50.821346.2106

163,593 VND

139,054 VND

4 Piece(s) Available 8 Day(s) 19.10.751371.6108

215,218 VND

182,935 VND

4 Piece(s) Available 8 Day(s) 25.411371.6108

Loading...Tải…

  1. << PrevTrước
  2. 3
  3. 4
  4. 5
  5. 6
  6. 7
  7. NextKế tiếp >>

Basic InformationThông tin cơ bản

Belt Type H Belt Shape Closed End Belt Material Rubber Belt
Belt Tooth Surface Standard (Single Sided) Core Wire Material Glass Fiber Belt Shape Type Trapezoidal Tooth Profile Circular Type
Transmission Torque Regular Torque Transmission

Frequently asked question (FAQ)FAQ

Question:Question: Why is the order model of the timing belt inconsistent with the actual belt label and engraving?
Answer:Answer: Order model is MISUMI product model, the label on the belt or printed model on the belt surface is the belt manufacturer model, which varies with manufacturer, but there will be no influence on the product itself.
Question:Question: The timing belt has been broken after use for a very short period of time. Is there a problem with the quality of the belt?
Answer:Answer: The timing belt is a standard product, and the same batch of products have very few individual quality problems, please refer to P.2875【Main causes of premature breakage and corresponding countermeasures】to troubleshoot the equipment in use.
Question:Question: Can alteration be made to the timing belt?
Answer:Answer: Alteration cannot be made to the circumference of the timing belt, and partial alteration can be made to the width.
Question:Question: What kind of belt is better to use under conditions that require high cleanliness?
Answer:Answer: The use of urethane belts is recommended, which has significantly improved dust drop, compared to the rubber belt.
Question:Question: What are the two main types of timing belts according to their functions? What is the role?
Answer:Answer: Timing belts are mainly divided into transmission type and driving type. For transmission type, the load can be placed on the timing belt surface for transmission. For driving type, no load is carried, and only the role of transmitting torque is played, which is similar to the role of chain.
Question:Question: How to judge or measure whether the belt tension meets the installation requirements?
Answer:Answer: It is recommended that the customer purchase the tension meter by himself and make a judgment according to the calculation formula of the initial design.
Question:Question: Which tooth type of the timing belt has the smallest clearance? What will it affect?
Answer:Answer: The arc tooth type has minimum clearance, which can improve such indicators as positioning accuracy and rigidity.

Check other FAQ (4 items) HideĐóng.

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều

  • Tel:Số điện thoại:0222-361-1555
  • Fax:Số Fax:0222-361-2555
  • InquiryYêu cầu

MISUMI APP

MISUMI APP QR

Install MISUMI APP

Mobile View Xem trên điện thoại

MISUMI Vietnam Company Limited, Legal Representative: Tomohiro Watanabe,
phone: 0222-361-1555, e-mail: cs@misumi.com.vn, Enterprise Code: 0107514576,
Date of Issuance: 22 July 2016, Place of Issuance: Bac Ninh, Business Certificate No. 6573041568-KD dated 27 September 2016 issued by the People's Committee of Bac Ninh

Công ty TNHH MISUMI Việt Nam, Đại diện theo pháp luật: Tomohiro Watanabe,
Điện thoại: 0222-361-1555, e-mail: cs@misumi.com.vn, Mã số doanh nghiệp: 0107514576,
ngày cấp 22/7/2016, nơi cấp: Bắc Ninh, Giấy phép kinh doanh số: 6573041568-KD ngày cấp 27/9/2016 bởi UBND tỉnh Bắc Ninh

online.gov.vn

Copyright © MISUMI Corporation All Rights Reserved.