(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.

Tel. Tel: 0222-361-1555 Email: cs@misumi.com.vn 8:00 - 17:00 (Mon - Sat)
Webcode Seach | Series
#CODE
Keyword suggestionsTừ khóa gợi ý
Part number suggestionsGợi ý mã sản phẩm
Discontinued Products

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

  • Viewed
    Products     Sản phẩm
    đã xem     최근 본
    상품     查看产品 查看產品
  • My
    Components     Linh kiện
    của tôi     나의 부품 我的部件 我的部件
  • Cart
Recently Viewed Products
X
My Components
X
Cart item(s)
X
Loading...
  • Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 24/11/2024 to 6:00 (ICT) 25/11/2024. We apologize for the inconvenience.
  • [Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
    [Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. 
  • [Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
    [Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.

  • How can we improve?

    How can we improve?

    Comments
    Name (Optional)
    E-mail Address (Optional)
    Tel (Optional)

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
    Customer Privacy Policy

    Thank you for your cooperation.

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
    Please use the inquiry form.

    Customer Privacy Policy

ConfigureTạo

Clear AllQuet sạch tât cả

Part number has not been determine

(669 Part Numbers Available)
Configure Remaining SpecificationsĐịnh cấu hình các thông số còn lại

Part Number CompleteĐã hoàn thành

C-TBN60H075
loading

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

  • Belt Width (mm)(mm)

    • 19.1
    • 25.4
    • 38.1
    • 50.8

    ClearTrống

  • Belt Norminal Width (Inch)(Inch)

    • 0.75
    • 1
    • 1.5
    • 2

    ClearTrống

  • Circumference Length(mm)

    • 304.8
    • 368.3
    • 431.8
    • 469.9
    • 508
    • 533.4
    • 558.8
    • 571.5
    • 584.2
    • 596.9
    • 609.6
    • 622.3
    • 635
    • 647.7
    • 660.4
    • 685.8
    • 698.5
    • 711.2
    • 723.9
    • 736.6
    • 762
    • 787.4
    • 800.1
    • 812.8
    • 825.5
    • 838.2
    • 850.9
    • 863.6
    • 876.3
    • 889
    • 901.7
    • 914.4
    • 927.1
    • 939.8
    • 952.5
    • 965.2
    • 977.9
    • 990.6
    • 1003.30
    • 1016
    • 1028.7
    • 1041.4
    • 1054.1
    • 1066.8
    • 1079.5
    • 1092.2
    • 1104.9
    • 1117.6
    • 1130.3
    • 1143
    • 1168.4
    • 1181.1
    • 1193.8
    • 1206.5
    • 1219.2
    • 1231.9
    • 1244.6
    • 1257.30
    • 1270
    • 1295.4
    • 1308.1
    • 1320.80
    • 1333.5
    • 1346.2
    • 1371.6
    • 1384.3
    • 1397.00
    • 1422.4
    • 1435.10
    • 1447.8
    • 1473.2
    • 1485.9
    • 1498.6
    • 1524
    • 1536.7
    • 1549.40
    • 1562.1
    • 1574.8
    • 1587.5
    • 1600.2
    • 1625.6
    • 1638.3
    • 1651
    • 1663.7
    • 1676.4
    • 1701.8
    • 1727.2
    • 1752.6
    • 1778
    • 1803.40
    • 1828.8
    • 1841.5
    • 1854.2
    • 1879.6
    • 1905
    • 1930.4
    • 1955.8
    • 1981.2
    • 2006.6
    • 2032
    • 2057.4
    • 2082.8
    • 2108.2
    • 2133.6
    • 2159
    • 2184.4
    • 2209.8
    • 2235.2
    • 2260.6
    • 2286
    • 2311.4
    • 2336.8
    • 2362.2
    • 2387.6
    • 2413
    • 2438.4
    • 2489.20
    • 2501.9
    • 2540
    • 2590.8
    • 2603.5
    • 2667.00
    • 2743.2
    • 2794
    • 2844.8
    • 2870.2
    • 2882.9
    • 2895.60
    • 2921.00
    • 2946.4
    • 2997.2
    • 3048
    • 3149.6
    • 3175
    • 3200.40
    • 3225.8
    • 3302
    • 3365.5
    • 3429
    • 3556
    • 3657.60
    • 3683
    • 3810
    • 3835.40
    • 3860.8
    • 3937
    • 3962.4
    • 4064
    • 4191
    • 4267.2
    • 4318
    • 4445
    • 4572
    • 4699.00
    • 4826
    • 5334.0

    ClearTrống

  • Number of Teeth

    • 24
    • 29
    • 34
    • 37
    • 40
    • 42
    • 44
    • 45
    • 46
    • 47
    • 48
    • 49
    • 50
    • 51
    • 52
    • 54
    • 55
    • 56
    • 57
    • 58
    • 60
    • 62
    • 63
    • 64
    • 65
    • 66
    • 67
    • 68
    • 69
    • 70
    • 71
    • 72
    • 73
    • 74
    • 75
    • 76
    • 77
    • 78
    • 79
    • 80
    • 81
    • 82
    • 83
    • 84
    • 85
    • 86
    • 87
    • 88
    • 89
    • 90
    • 92
    • 93
    • 94
    • 95
    • 96
    • 97
    • 98
    • 99
    • 100
    • 102
    • 103
    • 104
    • 105
    • 106
    • 108
    • 109
    • 110
    • 112
    • 113
    • 114
    • 116
    • 117
    • 118
    • 120
    • 121
    • 122
    • 123
    • 124
    • 125
    • 126
    • 128
    • 129
    • 130
    • 131
    • 132
    • 134
    • 136
    • 138
    • 140
    • 142
    • 144
    • 145
    • 146
    • 148
    • 150
    • 152
    • 154
    • 156
    • 158
    • 160
    • 162
    • 164
    • 166
    • 168
    • 170
    • 172
    • 174
    • 176
    • 178
    • 180
    • 182
    • 184
    • 186
    • 188
    • 190
    • 192
    • 196
    • 197
    • 200
    • 204
    • 205
    • 210
    • 216
    • 220
    • 224
    • 226
    • 227
    • 228
    • 230
    • 232
    • 236
    • 240
    • 248
    • 250
    • 252
    • 254
    • 260
    • 265
    • 270
    • 280
    • 288
    • 290
    • 300
    • 302
    • 304
    • 310
    • 312
    • 320
    • 330
    • 336
    • 340
    • 350
    • 360
    • 370
    • 380
    • 420

    ClearTrống

  • type

    • C-TBN□□□H

    ClearTrống

  • CADCAD

    • 2D
    • 3D

    ClearTrống

Days to ShipSố ngày giao hàng

    • Alltất cả các
    • Same day
    • 8 Day(s) or Less
    • 9 Day(s) or Less
    • 13 Day(s) or Less

    ClearTrống

Specify AlterationsChỉ định thay đổi

Timing Belts H (Part Number)

Timing Belts H
  • Sale
  • Until 31/12/2024
  • Volume Discount
Check FAQ of this product (7 items)
You can add up to 6 items per a category to the compare list.

Brand :

MISUMI

MiSUMi Economy

MISUMI

Filter By :
  • All
  • Sale Items
Part Number :
669 Part Numbers Available

C-TBN60H075 SALE

C-TBN60H100 SALE

C-TBN60H150 SALE

C-TBN60H200 SALE

C-TBN1000H075 SALE

C-TBN1000H100 SALE

C-TBN1000H150 SALE

C-TBN1000H200 SALE

C-TBN1020H075 SALE

C-TBN1020H100 SALE

C-TBN1020H150 SALE

C-TBN1020H200 SALE

C-TBN1025H075 SALE

C-TBN1025H100 SALE

C-TBN1025H150 SALE

C-TBN1025H200 SALE

C-TBN1050H075 SALE

C-TBN1050H100 SALE

C-TBN1050H150 SALE

C-TBN1050H200 SALE

C-TBN60H075
C-TBN60H075

Copy Part Number URL to Clipboard

The part number URL has been copied into your clipboard.

Close

loading
    • From :
      20,021VND/Unit
  • Order Qty :
  • Total Price :
    ---
  • Days to ship :
    ---

Select part number to Order Now/ Add to Cart

(i)

Caution

thận trọng

  • **RoHS Compliant is available for some part numbers.
    Please contact with MISUMI for detail effective date.

CAD Download
My Components
My Components
Similar ProductsSimilar Products
Product DetailProduct Detail

Product Description

RoHS Compliant Product



Economy H-Type Timing Belt

Quiet OperationCustomizableChloroprene Material

- With a wide range of belt lengths and widths, you can tailor the belt to perfectly match your specific equipment needs.

- Constructed with high-quality chloroprene rubber, these belts excel in resisting abrasion, oil, and grease, ensuring extended service life even in demanding environments.

- The glass fiber reinforced core provides exceptional strength and tensile strength, preventing belt elongation and slippage, resulting in consistent power transmission.

- The accurately designed trapezoidal tooth profile guarantees smooth and efficient power transmission, minimizing noise and vibration for optimal performance.

- Engineered to function reliably in temperatures ranging from -30°C to 90°C, these belts offer versatility across various operating conditions.

Economy H-Type Timing Belt
MISUMI Economy Logo

MISUMI Standard
MISUMI Standard

Cheaper Price
Cheaper Price

Product Variety
Product Variety

3D CAD
3D CAD Support


Product Overview

Usually, timing pulleys and timing belt are widely used to design mechanisms for transmitting rotational power generated by motors.
Driving and transmission are realized through the engagement between the teeth of timing pulleys and timing belts.
Local production in China delivers MISUMI quality at low price.

Dimensional Drawing

MISUMI Complete specifications Factory direct sales Original quality

■ Material/Specification Table
timing belt Material
① Tooth surface protection layerNylon canvas
② Tooth rubberChloroprene
③ Core wireGlass Fiber
Specifications Overview
TypesTooth pitch2θLrhHRrRaUnit weight
g/m (Width: 10mm)
H12.740°6.122.294.31140
timing beltPlease note that the meaning of the timing belt number of toothed timing belt varies with type.
 The belt circumference length of H (inch size) is the belt number.
timing beltTiming belt circumference length is core wire length.
timing beltC-TBN timing belt operating temperature range: -30 to 90 ℃.
timing beltThe model engraved on the back of the product is the manufacturer model.
timing beltMISUMI makes no commitment to this product brand.
timing beltFor the transmission capacity and calculation and design method of economy series timing belt, please refer to the national standard (GB) design manual.
 
Specification Table
■ Specification Table
Please order after selecting part number and parameters according to the selection steps to .
Ordering Example Part Number (TypeBelt Number Nominal Belt Width)
 C-TBN515H075

■ C-TBN
Tooth profile H (Pitch: 12.7mm)
Part NumberBelt
Nominal Width		Number of TeethBelt Circumference Length
(mm)
TypeBelt Number
C-TBN60H75
(19.1mm)

100
(25.4mm)

150
(38.1mm)

200
(50.8mm)		12152.40
120H24304.80
145H29368.30
170H34431.80
185H37469.90
200H40508.00
205H41520.70
210H42533.40
220H44558.80
225H45571.50
230H46584.20
235H47596.90
240H48609.60
245H49622.30
250H50635.00
255H51647.70
260H52660.40
270H54685.80
275H55698.50
280H56711.20
285H57723.90
290H58736.60
300H60762.00
305H61774.70
310H62787.40
315H63800.10
320H64812.80
325H65825.50
330H66838.20
335H67850.90
340H68863.60
345H69876.30
350H70889.00
355H71901.70
360H72914.40
365H73927.10
370H74939.80
375H75952.50
380H76965.20
385H77977.90
390H78990.60
395H791003.30
400H801016.00
405H811028.70
410H821041.40
415H831054.10
420H841066.80
425H851079.50
430H861092.20
435H871104.90
440H881117.60
445H891130.30
450H901143.00
460H921168.40
465H931181.10
470H941193.80
475H951206.50
480H961219.20
485H971231.90
490H981244.60
495H991257.30
500H1001270.00
510H1021295.40
515H1031308.10
520H1041320.80
525H1051333.50
530H1061346.20
540H1081371.60
545H1091384.30
550H1101397.00
555H1111409.70
560H1121422.40
565H1131435.10
570H1141447.80
580H1161473.20
585H1171485.90
590H1181498.60
600H1201524.00
605H1211536.70
610H1221549.40
615H1231562.10
620H1241574.80
625H1251587.50
630H1261600.20
640H1281625.60
645H1291638.30
650H1301651.00
660H1321676.40
670H1341701.80
680H1361727.20
690H1381752.60
700H1401778.00
710H1421803.40
720H1441828.80
725H1451841.50
730H1461854.20
740H1481879.60
750H1501905.00
760H1521930.40
770H1541955.80
780H1561981.20
785H1571993.90
790H1582006.60
800H1602032.00
810H1622057.40
820H1642082.80
830H1662108.20
840H1682133.60
850H1702159.00
860H1722184.40
870H1742209.80
880H1762235.20
900H1802286.00
910H1822311.40
920H1842336.80
930H1862362.20
940H1882387.60
950H1902413.00
960H1922438.40
980H1962489.20
985H1972501.90
1000H2002540.00
1020H2042590.80
1050H2102667.00
1070H2142717.80
1080H2162743.20
1100H2202794.00
1120H2242844.80
1130H2262870.20
1135H2272882.90
1140H2282895.60
1150H2302921.00
1160H2322946.40
1180H2362997.20
1200H2403048.00
1240H2483149.60
1250H2503175.00
1260H2523200.40
1270H2543225.80
1285H2573263.90
1300H2603302.00
1325H2653365.50
1350H2703429.00
1360H2723454.40
1400H2803556.00
1440H2883657.60
1450H2903683.00
1460H2923708.40
1500H3003810.00
1510H3023835.40
1550H3103937.00
1560H3123962.40
1600H3204064.00
1630H3264140.20
1650H3304191.00
1680H3364267.20
1700H3404318.00
1750H3504445.00
1780H3564521.20
1800H3604572.00
1850H3704699.00
1900H3804826.00
1950H3904953.00
2100H4205334.00

Product Features

S type circular tooth profile economy series timing belt is made of rubber, featuring deviation prevention and wear resistance■ S type circular tooth profile rubber timing belt (S2M/S3M/S5M/S8M/S14M)
Feature 1: Reasonable semi-circular arc tooth profile design can provide higher torque to adapt to high load transmission.
Feature 2: timing belt Reduce the noise generated by high-speed operation.
Feature 3: Tooth peak changes under force, ensuring a longer life than conventional circular tooth profile teeth.
Feature 4: Have certain conductivity
Feature 5: Operating Temperature Range: -30 to 90℃.
Features of P type domestic high-accuracy circular tooth profile timing belt■ P type circular tooth profile rubber timing belt (P5M/P8M)
Feature 1: Reasonable semi-circular arc tooth profile design can provide higher torque to adapt to high load transmission.
Feature 2: Special concave tooth peak design, better reducing noise generated by high-speed operation.
Feature 3: Tooth peak changes under force, ensuring greater accuracy than conventional circular tooth profile teeth.
Feature 4: Have certain conductivity
Feature 5: timing belt Operating Temperature Range: -25 to 80℃.
MXL, XL, L, H trapezoidal tooth profile timing belts are suitable for light load transmission and driving■ Trapezoidal tooth profile rubber timing belt (MXL/XL/H/T5/T10)
Feature 1: Suitable for light load transmission, standard torque driving.
Feature 2: Tooth rubber uses chloroprene to protect core wire, providing excellent bending fatigue resistance, heat resistance, oil resistance
Feature 3: Ideal choice of economical and maintenance-free alternative to traditional transmission method.
Feature 4: Have certain conductivity
Feature 5: timing belt Operating Temperature Range: -30 to 90℃ (MXL/XL/L/H), 0 to 80℃ (T5/T10)

Example of Use

Usage Method Example DrawingInstructions for use of timing wheel and timing belt
The TIMING BELT is installed on the motor and the rotating shaft to transmit the rotational force① Driving (The driven wheel is driven by the driving wheel for transmission)
Transmission belt, used for repeated motion with the object not rotating and high requirements on positioning accuracy② Transmission (Used for repeated motion with the object not rotating and high requirements on positioning accuracy)
Usage Method Example DrawingInstructions for use of timing wheel and timing belt
Plates are conveyed by two timing toothed belts③ Conveyance (Plates are conveyed by two timing toothed belts)
Usage method and example for conveyor belt lifting, repeated positioning motion④ Traction transmission (Workpieces are clamped and transmitted by the belt)

Usage Method

■ Installation method for timing belt transmission
①Turn off the power supply, remove the protective cover, loosen the motor assembly bolts, move the motor so that the belt is loose enough. The timing belt can be removed without prying. Never try to pry the belt down.
②Remove the old belt and check for abnormal wear. Excessive wear may mean that there are problems in the design or maintenance of the transmission device.
③Choose the right timing belt to replace.
④To clean the timing belt and pulley, wipe with a cloth dipped in a small amount of non-volatile liquid. Soaking in detergent or scrubbing the belt with detergent is not advisable. To remove grease, it is also undesirable to wipe with sandpaper or scratch with a sharp object. The belt must be kept dry before installation and use.
⑤Check the pulley for abnormal wear or cracks. If the wear is excessive, the pulley must be replaced.
⑥Check whether the pulley is linearly symmetrical. Linear symmetry of the pulley is essential for the operation of the timing belt, especially the timing belt transmission device.
Asymmetry of the pulley is shown as follows:
 Usage method Installation guide Complete selection Fit installation
⑦Check the remaining transmission device components, such as bearings and bushings, for symmetry, durability, lubrication and other conditions.
⑧Install a new timing belt on the pulley. Never pry or use too much force.
⑨Tighten to narrow the center distance of the transmission device until the tension tester detects that the timing belt tension is appropriate. Turn the driving wheel several times with your hands. Re-test tension.
⑩Tighten the assembly timing belt of the motor and correct the torque. Since any change in the center distance of the transmission device during operation will result in poor belt performance, it is important to ensure that all transmission components have been tightened.
⑪Start the device and observe the timing belt performance to see if there is abnormal vibration, and listen carefully if there is abnormal noise. It is best to turn off the machine and check the conditions of the bearing and motor.

Precautions

① Do not bend the timing belt by force.
It is strictly forbidden to bend the belt, which easily causes breakage
② Do not use in direct contact with water, solvent, oil, acid, alkali, UV, ozone, etc.
Do not directly contact water in operating environmentDo not use in acidic environmentsAvoid contact with alkaline solventsTry not to touch oil liquidsAvoid exposure to strong UV rays
③ Please timing belt avoid using or keeping at extreme high or low temperatures beyond the operating temperature range, or in humid environments.
④ During installation and maintenance, be sure to cut off the power supply and confirm that the machine is completely stopped before proceeding.
⑤ When there may be impurities, be sure to set the guard.

Application Industries

Food Semiconductor Smart phone
It is widely used in food transport and transfer Industry Application Industry Semiconductor Smartphone 3C IPHONE Huawei
Automotive Electronic & Electrical Appliances Medical
Application in automotive assembly production line Method of usage in electronic & electrical and home appliances industry Widely used in medical equipment, blood machines and other related equipment in the biomedical industry

Related Products

High Torque Timing Belt Pulleys S2M Type Flat Timing Belt For General Use Economy Series Toothed Timing Belt
S2M S3M S5M S8M S14M Type
TIMING PULLY High torque timing pulley MISUMI brand Pulley manufacturer S2M FLATBELT Flat belt Conveyor belt Transportation belt MISUMI brand Economy series Domestic S type tooth profile timing belt Low price Short delivery time
Reference timing belt model: HTPA48S2M040-B-N10 Reference timing belt model: HBLT350-4.23 Reference timing belt model: C-HTBN400S2M-40
Reason for recommendation: high transmission power, short delivery time, multiple types Reason for recommendation: intended use for transmission, rich variety of specifications and types Reason for recommendation: rich variety of specifications, high cost performance

Part Number 

  • Incomplete part number.
    Please use left hand selections to complete a part number.    Incomplete part number.
    Please use left hand selections to complete a part number.
Loading...Tải…
30
60
90
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. NextKế tiếp >>
Part Number
C-TBN60H075SALE
C-TBN60H100SALE
C-TBN60H150SALE
C-TBN60H200SALE
C-TBN1000H075SALE
C-TBN1000H100SALE
C-TBN1000H150SALE
C-TBN1000H200SALE
C-TBN1020H075SALE
C-TBN1020H100SALE
C-TBN1020H150SALE
C-TBN1020H200SALE
C-TBN1025H075SALE
C-TBN1025H100SALE
C-TBN1025H150SALE
C-TBN1025H200SALE
C-TBN1050H075SALE
C-TBN1050H100SALE
C-TBN1050H150SALE
C-TBN1050H200SALE
C-TBN1070H075SALE
C-TBN1070H100SALE
C-TBN1070H150SALE
C-TBN1070H200SALE
C-TBN1080H075SALE
C-TBN1080H100SALE
C-TBN1080H150SALE
C-TBN1080H200SALE
C-TBN1100H075SALE
C-TBN1100H100SALE
C-TBN1100H150SALE
C-TBN1100H200SALE
C-TBN1120H075SALE
C-TBN1120H100SALE
C-TBN1120H150SALE
C-TBN1120H200SALE
C-TBN1130H075SALE
C-TBN1130H100SALE
C-TBN1130H150SALE
C-TBN1130H200SALE
C-TBN1135H075SALE
C-TBN1135H100SALE
C-TBN1135H150SALE
C-TBN1135H200SALE
C-TBN1140H075SALE
C-TBN1140H100SALE
C-TBN1140H150SALE
C-TBN1140H200SALE
C-TBN1150H075SALE
C-TBN1150H100SALE
C-TBN1150H150SALE
C-TBN1150H200SALE
C-TBN1160H075SALE
C-TBN1160H100SALE
C-TBN1160H150SALE
C-TBN1160H200SALE
C-TBN1180H075SALE
C-TBN1180H100SALE
C-TBN1180H150SALE
C-TBN1180H200SALE
C-TBN1200H075SALE
C-TBN1200H100SALE
C-TBN1200H150SALE
C-TBN1200H200SALE
C-TBN120H075SALE
C-TBN120H100SALE
C-TBN120H150SALE
C-TBN120H200SALE
C-TBN1240H075SALE
C-TBN1240H100SALE
C-TBN1240H150SALE
C-TBN1240H200SALE
C-TBN1250H075SALE
C-TBN1250H100SALE
C-TBN1250H150SALE
C-TBN1250H200SALE
C-TBN1260H075SALE
C-TBN1260H100SALE
C-TBN1260H150SALE
C-TBN1260H200SALE
C-TBN1270H075SALE
C-TBN1270H100SALE
C-TBN1270H150SALE
C-TBN1270H200SALE
C-TBN1285H075SALE
C-TBN1285H100SALE
C-TBN1285H150SALE
C-TBN1285H200SALE
C-TBN1300H075SALE
C-TBN1300H100SALE
Part NumberPriceMinimum Order Qty.Volume DiscountDays to ShipSố ngày giao hàngBelt Width (mm)
(mm) 		Belt Norminal Width (Inch)
(Inch) 		Circumference Length
(mm) 		Number of Teeth

20,021 VND

17,018 VND

1 Piece(s) Available 13 Day(s) 19.10.75--

20,025 VND

17,021 VND

1 Piece(s) Available 13 Day(s) 25.41--

38,114 VND

32,397 VND

1 Piece(s) Available 13 Day(s) 38.11.5--

38,121 VND

32,403 VND

1 Piece(s) Available 13 Day(s) 50.82--

254,550 VND

216,368 VND

4 Piece(s) Available 8 Day(s) 19.10.752540200

336,271 VND

285,830 VND

4 Piece(s) Available 8 Day(s) 25.412540200

500,950 VND

425,808 VND

4 Piece(s) Available 8 Day(s) 38.11.52540200

665,629 VND

565,785 VND

4 Piece(s) Available 8 Day(s) 50.822540200

190,337 VND

161,786 VND

4 Piece(s) Available 8 Day(s) 19.10.752590.8204

250,782 VND

213,165 VND

4 Piece(s) Available 8 Day(s) 25.412590.8204

372,732 VND

316,822 VND

4 Piece(s) Available 8 Day(s) 38.11.52590.8204

494,649 VND

420,452 VND

4 Piece(s) Available 8 Day(s) 50.822590.8204

191,220 VND

162,537 VND

4 Piece(s) Available 8 Day(s) 19.10.752603.5205

251,947 VND

214,155 VND

4 Piece(s) Available 8 Day(s) 25.412603.5205

374,499 VND

318,324 VND

4 Piece(s) Available 8 Day(s) 38.11.52603.5205

497,018 VND

422,465 VND

4 Piece(s) Available 8 Day(s) 50.822603.5205

266,981 VND

226,934 VND

4 Piece(s) Available 8 Day(s) 19.10.752667.00210

352,765 VND

299,850 VND

4 Piece(s) Available 8 Day(s) 25.412667.00210

525,634 VND

446,789 VND

4 Piece(s) Available 8 Day(s) 38.11.52667.00210

698,543 VND

593,762 VND

4 Piece(s) Available 8 Day(s) 50.822667.00210

197,774 VND

168,108 VND

1 Piece(s) Available 13 Day(s) 19.10.75--

268,889 VND

228,556 VND

1 Piece(s) Available 13 Day(s) 25.41--

397,053 VND

337,495 VND

1 Piece(s) Available 13 Day(s) 38.11.5--

537,857 VND

457,178 VND

1 Piece(s) Available 13 Day(s) 50.82--

243,913 VND

207,326 VND

4 Piece(s) Available 8 Day(s) 19.10.752743.2216

322,851 VND

274,423 VND

4 Piece(s) Available 8 Day(s) 25.412743.2216

480,838 VND

408,712 VND

4 Piece(s) Available 8 Day(s) 38.11.52743.2216

638,822 VND

542,999 VND

4 Piece(s) Available 8 Day(s) 50.822743.2216

279,344 VND

237,442 VND

4 Piece(s) Available 8 Day(s) 19.10.752794220

369,188 VND

313,810 VND

4 Piece(s) Available 8 Day(s) 25.412794220

550,358 VND

467,804 VND

4 Piece(s) Available 8 Day(s) 38.11.52794220

731,529 VND

621,800 VND

4 Piece(s) Available 8 Day(s) 50.822794220

208,247 VND

177,010 VND

4 Piece(s) Available 8 Day(s) 19.10.752844.8224

274,734 VND

233,524 VND

4 Piece(s) Available 8 Day(s) 25.412844.8224

408,591 VND

347,302 VND

4 Piece(s) Available 8 Day(s) 38.11.52844.8224

542,483 VND

461,111 VND

4 Piece(s) Available 8 Day(s) 50.822844.8224

210,087 VND

178,574 VND

4 Piece(s) Available 8 Day(s) 19.10.752870.2226

277,103 VND

235,538 VND

4 Piece(s) Available 8 Day(s) 25.412870.2226

412,159 VND

350,335 VND

4 Piece(s) Available 8 Day(s) 38.11.52870.2226

547,252 VND

465,164 VND

4 Piece(s) Available 8 Day(s) 50.822870.2226

217,882 VND

185,200 VND

4 Piece(s) Available 8 Day(s) 19.10.752882.9227

287,512 VND

244,385 VND

4 Piece(s) Available 8 Day(s) 25.412882.9227

427,757 VND

363,593 VND

4 Piece(s) Available 8 Day(s) 38.11.52882.9227

568,040 VND

482,834 VND

4 Piece(s) Available 8 Day(s) 50.822882.9227

289,266 VND

245,876 VND

4 Piece(s) Available 8 Day(s) 19.10.752895.60228

382,395 VND

325,036 VND

4 Piece(s) Available 8 Day(s) 25.412895.60228

570,100 VND

484,585 VND

4 Piece(s) Available 8 Day(s) 38.11.52895.60228

757,873 VND

644,192 VND

4 Piece(s) Available 8 Day(s) 50.822895.60228

291,739 VND

247,978 VND

4 Piece(s) Available 8 Day(s) 19.10.752921.00230

385,681 VND

327,829 VND

4 Piece(s) Available 8 Day(s) 25.412921.00230

575,044 VND

488,787 VND

4 Piece(s) Available 8 Day(s) 38.11.52921.00230

764,444 VND

649,777 VND

4 Piece(s) Available 8 Day(s) 50.822921.00230

215,452 VND

183,134 VND

4 Piece(s) Available 8 Day(s) 19.10.752946.4232

284,272 VND

241,631 VND

4 Piece(s) Available 8 Day(s) 25.412946.4232

422,899 VND

359,464 VND

4 Piece(s) Available 8 Day(s) 38.11.52946.4232

561,597 VND

477,357 VND

4 Piece(s) Available 8 Day(s) 50.822946.4232

265,848 VND

225,971 VND

4 Piece(s) Available 8 Day(s) 19.10.752997.2236

352,132 VND

299,312 VND

4 Piece(s) Available 8 Day(s) 25.412997.2236

524,742 VND

446,031 VND

4 Piece(s) Available 8 Day(s) 38.11.52997.2236

697,313 VND

592,716 VND

4 Piece(s) Available 8 Day(s) 50.822997.2236

304,100 VND

258,485 VND

4 Piece(s) Available 8 Day(s) 19.10.753048240

402,172 VND

341,846 VND

4 Piece(s) Available 8 Day(s) 25.413048240

599,765 VND

509,800 VND

4 Piece(s) Available 8 Day(s) 38.11.53048240

797,392 VND

677,783 VND

4 Piece(s) Available 8 Day(s) 50.823048240

42,497 VND

36,122 VND

4 Piece(s) Available 8 Day(s) 19.10.75304.824

54,227 VND

46,093 VND

4 Piece(s) Available 8 Day(s) 25.41304.824

77,902 VND

66,217 VND

4 Piece(s) Available 8 Day(s) 38.11.5304.824

101,577 VND

86,340 VND

4 Piece(s) Available 8 Day(s) 50.82304.824

265,411 VND

225,599 VND

4 Piece(s) Available 8 Day(s) 19.10.753149.6248

350,632 VND

298,037 VND

4 Piece(s) Available 8 Day(s) 25.413149.6248

522,417 VND

444,054 VND

4 Piece(s) Available 8 Day(s) 38.11.53149.6248

694,056 VND

589,948 VND

4 Piece(s) Available 8 Day(s) 50.823149.6248

316,530 VND

269,051 VND

4 Piece(s) Available 8 Day(s) 19.10.753175250

418,630 VND

355,836 VND

4 Piece(s) Available 8 Day(s) 25.413175250

624,451 VND

530,783 VND

4 Piece(s) Available 8 Day(s) 38.11.53175250

830,307 VND

705,761 VND

4 Piece(s) Available 8 Day(s) 50.823175250

372,497 VND

316,622 VND

4 Piece(s) Available 8 Day(s) 19.10.753200.40252

493,049 VND

419,092 VND

4 Piece(s) Available 8 Day(s) 25.413200.40252

736,097 VND

625,682 VND

4 Piece(s) Available 8 Day(s) 38.11.53200.40252

979,180 VND

832,303 VND

4 Piece(s) Available 8 Day(s) 50.823200.40252

235,308 VND

200,012 VND

4 Piece(s) Available 8 Day(s) 19.10.753225.8254

310,592 VND

264,003 VND

4 Piece(s) Available 8 Day(s) 25.413225.8254

462,359 VND

393,005 VND

4 Piece(s) Available 8 Day(s) 38.11.53225.8254

614,198 VND

522,068 VND

4 Piece(s) Available 8 Day(s) 50.823225.8254

236,464 VND

200,994 VND

1 Piece(s) Available 13 Day(s) 19.10.75--

320,392 VND

272,333 VND

1 Piece(s) Available 13 Day(s) 25.41--

474,345 VND

403,193 VND

1 Piece(s) Available 13 Day(s) 38.11.5--

640,864 VND

544,734 VND

1 Piece(s) Available 13 Day(s) 50.82--

240,643 VND

204,547 VND

4 Piece(s) Available 8 Day(s) 19.10.753302260

317,693 VND

270,039 VND

4 Piece(s) Available 8 Day(s) 25.413302260

Loading...Tải…

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. NextKế tiếp >>

Basic InformationThông tin cơ bản

Belt Type H Belt Shape Closed End Belt Material Rubber Belt
Belt Tooth Surface Standard (Single Sided) Core Wire Material Glass Fiber Belt Shape Type Trapezoidal Tooth Profile Circular Type
Transmission Torque Regular Torque Transmission

Frequently asked question (FAQ)FAQ

Question:Question: Why is the order model of the timing belt inconsistent with the actual belt label and engraving?
Answer:Answer: Order model is MISUMI product model, the label on the belt or printed model on the belt surface is the belt manufacturer model, which varies with manufacturer, but there will be no influence on the product itself.
Question:Question: The timing belt has been broken after use for a very short period of time. Is there a problem with the quality of the belt?
Answer:Answer: The timing belt is a standard product, and the same batch of products have very few individual quality problems, please refer to P.2875【Main causes of premature breakage and corresponding countermeasures】to troubleshoot the equipment in use.
Question:Question: Can alteration be made to the timing belt?
Answer:Answer: Alteration cannot be made to the circumference of the timing belt, and partial alteration can be made to the width.
Question:Question: What kind of belt is better to use under conditions that require high cleanliness?
Answer:Answer: The use of urethane belts is recommended, which has significantly improved dust drop, compared to the rubber belt.
Question:Question: What are the two main types of timing belts according to their functions? What is the role?
Answer:Answer: Timing belts are mainly divided into transmission type and driving type. For transmission type, the load can be placed on the timing belt surface for transmission. For driving type, no load is carried, and only the role of transmitting torque is played, which is similar to the role of chain.
Question:Question: How to judge or measure whether the belt tension meets the installation requirements?
Answer:Answer: It is recommended that the customer purchase the tension meter by himself and make a judgment according to the calculation formula of the initial design.
Question:Question: Which tooth type of the timing belt has the smallest clearance? What will it affect?
Answer:Answer: The arc tooth type has minimum clearance, which can improve such indicators as positioning accuracy and rigidity.

Check other FAQ (4 items) HideĐóng.

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều

  • Tel:Số điện thoại:0222-361-1555
  • Fax:Số Fax:0222-361-2555
  • InquiryYêu cầu

MISUMI APP

MISUMI APP QR

Install MISUMI APP

Mobile View Xem trên điện thoại

MISUMI Vietnam Company Limited, Legal Representative: Tomohiro Watanabe,
phone: 0222-361-1555, e-mail: cs@misumi.com.vn, Enterprise Code: 0107514576,
Date of Issuance: 22 July 2016, Place of Issuance: Bac Ninh, Business Certificate No. 6573041568-KD dated 27 September 2016 issued by the People's Committee of Bac Ninh

Công ty TNHH MISUMI Việt Nam, Đại diện theo pháp luật: Tomohiro Watanabe,
Điện thoại: 0222-361-1555, e-mail: cs@misumi.com.vn, Mã số doanh nghiệp: 0107514576,
ngày cấp 22/7/2016, nơi cấp: Bắc Ninh, Giấy phép kinh doanh số: 6573041568-KD ngày cấp 27/9/2016 bởi UBND tỉnh Bắc Ninh

online.gov.vn

Copyright © MISUMI Corporation All Rights Reserved.