(!) Since support from Microsoft will end on January 14th, 2020, Windows 7 will be excluded from the recommended environment from December 15th, 2019 on this site. Vì lý do Microsoft kết thúc hỗ trợ cho Windows 7 vào ngày 14/01/2020, Windows 7 sẽ là hệ điều hành không được khuyến khích sử dụng với trang web này từ ngày 15/12/2019.

Tel. Tel: 0222-361-1555 Email: cs@misumi.com.vn 8:00 - 17:00 (Mon - Sat)
Webcode Seach | Series
#CODE
Keyword suggestionsTừ khóa gợi ý
Part number suggestionsGợi ý mã sản phẩm
Discontinued Products

Search by Category / Brand Tìm theo danh mục, nhãn hiệu

Search by Category Tìm theo danh mục

  • Viewed
    Products     Sản phẩm
    đã xem     최근 본
    상품     查看产品 查看產品
  • My
    Components     Linh kiện
    của tôi     나의 부품 我的部件 我的部件
  • Cart
Recently Viewed Products
X
My Components
X
Cart item(s)
X
Loading...
  • Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 15/12/2024 to 5:00 (ICT) 16/12/2024. We apologize for the inconvenience.
  • [Thông báo] Cập nhật địa chỉ kho tập kết hàng hóa tại khu vực miền Nam của MISUMI Việt Nam. Xem chi tiết.
    [Announcement] Update on warehouse address in the Southern region of MISUIMI Vietnam. See more. 
  • [Cảnh Báo] Thủ Đoạn Lừa Đảo Từ Nhân Viên Giao Hàng – Yêu Cầu Trả Phí Ship. Xem chi tiết.
    [Warning] Fraud Calling from Shipper - Asking to Pay Shipping Fee. See more.

  • How can we improve?

    How can we improve?

    Comments
    Name (Optional)
    E-mail Address (Optional)
    Tel (Optional)

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
    Customer Privacy Policy

    Thank you for your cooperation.

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
    Please use the inquiry form.

    Customer Privacy Policy

ConfigureTạo

Clear AllQuet sạch tât cả

Part number has not been determine

(665 Part Numbers Available)
Configure Remaining SpecificationsĐịnh cấu hình các thông số còn lại

Part Number CompleteĐã hoàn thành

C-TBN540H150
loading

Specification/DimensionsĐặc điểm kỹ thuật / Kích thướcĐặc điểm kỹ thuật / Kích thước

  • Belt Width (mm)(mm)

    • 19.1
    • 25.4
    • 38.1
    • 50.8

    ClearTrống

  • Belt Norminal Width (Inch)(Inch)

    • 0.75
    • 1
    • 1.5
    • 2

    ClearTrống

  • Circumference Length(mm)

    • 304.8
    • 368.3
    • 431.8
    • 469.9
    • 508
    • 533.4
    • 558.8
    • 571.5
    • 584.2
    • 596.9
    • 609.6
    • 622.3
    • 635
    • 647.7
    • 660.4
    • 685.8
    • 698.5
    • 711.2
    • 723.9
    • 736.6
    • 762
    • 787.4
    • 800.1
    • 812.8
    • 825.5
    • 838.2
    • 850.9
    • 863.6
    • 876.3
    • 889
    • 901.7
    • 914.4
    • 927.1
    • 939.8
    • 952.5
    • 965.2
    • 977.9
    • 990.6
    • 1003.30
    • 1016
    • 1028.7
    • 1041.4
    • 1054.1
    • 1066.8
    • 1079.5
    • 1092.2
    • 1104.9
    • 1117.6
    • 1130.3
    • 1143
    • 1168.4
    • 1181.1
    • 1193.8
    • 1206.5
    • 1219.2
    • 1231.9
    • 1244.6
    • 1257.30
    • 1270
    • 1295.4
    • 1308.1
    • 1320.80
    • 1333.5
    • 1346.2
    • 1371.6
    • 1384.3
    • 1397.00
    • 1422.4
    • 1435.10
    • 1447.8
    • 1473.2
    • 1485.9
    • 1498.6
    • 1524
    • 1536.7
    • 1549.40
    • 1562.1
    • 1574.8
    • 1587.5
    • 1600.2
    • 1625.6
    • 1638.3
    • 1651
    • 1663.7
    • 1676.4
    • 1701.8
    • 1727.2
    • 1752.6
    • 1778
    • 1803.40
    • 1828.8
    • 1841.5
    • 1854.2
    • 1879.6
    • 1905
    • 1930.4
    • 1955.8
    • 1981.2
    • 2006.6
    • 2032
    • 2057.4
    • 2082.8
    • 2108.2
    • 2133.6
    • 2159
    • 2184.4
    • 2209.8
    • 2235.2
    • 2260.6
    • 2286
    • 2311.4
    • 2336.8
    • 2362.2
    • 2387.6
    • 2413
    • 2438.4
    • 2489.20
    • 2501.9
    • 2540
    • 2590.8
    • 2603.5
    • 2667.00
    • 2743.2
    • 2794
    • 2844.8
    • 2870.2
    • 2882.9
    • 2895.60
    • 2921.00
    • 2946.4
    • 2997.2
    • 3048
    • 3149.6
    • 3175
    • 3200.40
    • 3225.8
    • 3302
    • 3365.5
    • 3429
    • 3556
    • 3657.60
    • 3683
    • 3810
    • 3835.40
    • 3860.8
    • 3937
    • 3962.4
    • 4064
    • 4191
    • 4267.2
    • 4318
    • 4445
    • 4572
    • 4699.00
    • 4826
    • 5334.0

    ClearTrống

  • Number of Teeth

    • 24
    • 29
    • 34
    • 37
    • 40
    • 42
    • 44
    • 45
    • 46
    • 47
    • 48
    • 49
    • 50
    • 51
    • 52
    • 54
    • 55
    • 56
    • 57
    • 58
    • 60
    • 62
    • 63
    • 64
    • 65
    • 66
    • 67
    • 68
    • 69
    • 70
    • 71
    • 72
    • 73
    • 74
    • 75
    • 76
    • 77
    • 78
    • 79
    • 80
    • 81
    • 82
    • 83
    • 84
    • 85
    • 86
    • 87
    • 88
    • 89
    • 90
    • 92
    • 93
    • 94
    • 95
    • 96
    • 97
    • 98
    • 99
    • 100
    • 102
    • 103
    • 104
    • 105
    • 106
    • 108
    • 109
    • 110
    • 112
    • 113
    • 114
    • 116
    • 117
    • 118
    • 120
    • 121
    • 122
    • 123
    • 124
    • 125
    • 126
    • 128
    • 129
    • 130
    • 131
    • 132
    • 134
    • 136
    • 138
    • 140
    • 142
    • 144
    • 145
    • 146
    • 148
    • 150
    • 152
    • 154
    • 156
    • 158
    • 160
    • 162
    • 164
    • 166
    • 168
    • 170
    • 172
    • 174
    • 176
    • 178
    • 180
    • 182
    • 184
    • 186
    • 188
    • 190
    • 192
    • 196
    • 197
    • 200
    • 204
    • 205
    • 210
    • 216
    • 220
    • 224
    • 226
    • 227
    • 228
    • 230
    • 232
    • 236
    • 240
    • 248
    • 250
    • 252
    • 254
    • 260
    • 265
    • 270
    • 280
    • 288
    • 290
    • 300
    • 302
    • 304
    • 310
    • 312
    • 320
    • 330
    • 336
    • 340
    • 350
    • 360
    • 370
    • 380
    • 420

    ClearTrống

  • type

    • C-TBN□□□H

    ClearTrống

  • CADCAD

    • 2D
    • 3D

    ClearTrống

Days to ShipSố ngày giao hàng

    • Alltất cả các
    • Same day
    • 8 Day(s) or Less
    • 9 Day(s) or Less
    • 13 Day(s) or Less

    ClearTrống

Specify AlterationsChỉ định thay đổi

Timing Belts H (Part Number)

Timing Belts H
  • Sale
  • Until 31/12/2024
  • Volume Discount
Check FAQ of this product (7 items)
You can add up to 6 items per a category to the compare list.

Brand :

MISUMI

MiSUMi Economy

MISUMI

Filter By :
  • All
  • Sale Items
Part Number :
665 Part Numbers Available

C-TBN540H150 SALE

C-TBN540H200 SALE

C-TBN545H075 SALE

C-TBN545H100 SALE

C-TBN545H150 SALE

C-TBN545H200 SALE

C-TBN550H075 SALE

C-TBN550H100 SALE

C-TBN550H150 SALE

C-TBN550H200 SALE

C-TBN555H075 SALE

C-TBN555H100 SALE

C-TBN555H150 SALE

C-TBN555H200 SALE

C-TBN560H075 SALE

C-TBN560H100 SALE

C-TBN560H150 SALE

C-TBN560H200 SALE

C-TBN565H075 SALE

C-TBN565H100 SALE

C-TBN540H150
C-TBN540H150

Copy Part Number URL to Clipboard

The part number URL has been copied into your clipboard.

Close

loading
    • From :
      20,021VND/Unit
  • Order Qty :
  • Total Price :
    ---
  • Days to ship :
    ---

Select part number to Order Now/ Add to Cart

(i)

Caution

thận trọng

  • **RoHS Compliant is available for some part numbers.
    Please contact with MISUMI for detail effective date.

CAD Download
My Components
My Components
Similar ProductsSimilar Products
Product DetailProduct Detail

Product Description

RoHS Compliant Product



Economy H-Type Timing Belt

Quiet OperationCustomizableChloroprene Material

- With a wide range of belt lengths and widths, you can tailor the belt to perfectly match your specific equipment needs.

- Constructed with high-quality chloroprene rubber, these belts excel in resisting abrasion, oil, and grease, ensuring extended service life even in demanding environments.

- The glass fiber reinforced core provides exceptional strength and tensile strength, preventing belt elongation and slippage, resulting in consistent power transmission.

- The accurately designed trapezoidal tooth profile guarantees smooth and efficient power transmission, minimizing noise and vibration for optimal performance.

- Engineered to function reliably in temperatures ranging from -30°C to 90°C, these belts offer versatility across various operating conditions.

Economy H-Type Timing Belt
MISUMI Economy Logo

MISUMI Standard
MISUMI Standard

Cheaper Price
Cheaper Price

Product Variety
Product Variety

3D CAD
3D CAD Support


Product Overview

Usually, timing pulleys and timing belt are widely used to design mechanisms for transmitting rotational power generated by motors.
Driving and transmission are realized through the engagement between the teeth of timing pulleys and timing belts.
Local production in China delivers MISUMI quality at low price.

Dimensional Drawing

MISUMI Complete specifications Factory direct sales Original quality

■ Material/Specification Table
timing belt Material
① Tooth surface protection layerNylon canvas
② Tooth rubberChloroprene
③ Core wireGlass Fiber
Specifications Overview
TypesTooth pitch2θLrhHRrRaUnit weight
g/m (Width: 10mm)
H12.740°6.122.294.31140
timing beltPlease note that the meaning of the timing belt number of toothed timing belt varies with type.
 The belt circumference length of H (inch size) is the belt number.
timing beltTiming belt circumference length is core wire length.
timing beltC-TBN timing belt operating temperature range: -30 to 90 ℃.
timing beltThe model engraved on the back of the product is the manufacturer model.
timing beltMISUMI makes no commitment to this product brand.
timing beltFor the transmission capacity and calculation and design method of economy series timing belt, please refer to the national standard (GB) design manual.
 
Specification Table
■ Specification Table
Please order after selecting part number and parameters according to the selection steps to .
Ordering Example Part Number (TypeBelt Number Nominal Belt Width)
 C-TBN515H075

■ C-TBN
Tooth profile H (Pitch: 12.7mm)
Part NumberBelt
Nominal Width		Number of TeethBelt Circumference Length
(mm)
TypeBelt Number
C-TBN60H75
(19.1mm)

100
(25.4mm)

150
(38.1mm)

200
(50.8mm)		12152.40
120H24304.80
145H29368.30
170H34431.80
185H37469.90
200H40508.00
205H41520.70
210H42533.40
220H44558.80
225H45571.50
230H46584.20
235H47596.90
240H48609.60
245H49622.30
250H50635.00
255H51647.70
260H52660.40
270H54685.80
275H55698.50
280H56711.20
285H57723.90
290H58736.60
300H60762.00
305H61774.70
310H62787.40
315H63800.10
320H64812.80
325H65825.50
330H66838.20
335H67850.90
340H68863.60
345H69876.30
350H70889.00
355H71901.70
360H72914.40
365H73927.10
370H74939.80
375H75952.50
380H76965.20
385H77977.90
390H78990.60
395H791003.30
400H801016.00
405H811028.70
410H821041.40
415H831054.10
420H841066.80
425H851079.50
430H861092.20
435H871104.90
440H881117.60
445H891130.30
450H901143.00
460H921168.40
465H931181.10
470H941193.80
475H951206.50
480H961219.20
485H971231.90
490H981244.60
495H991257.30
500H1001270.00
510H1021295.40
515H1031308.10
520H1041320.80
525H1051333.50
530H1061346.20
540H1081371.60
545H1091384.30
550H1101397.00
555H1111409.70
560H1121422.40
565H1131435.10
570H1141447.80
580H1161473.20
585H1171485.90
590H1181498.60
600H1201524.00
605H1211536.70
610H1221549.40
615H1231562.10
620H1241574.80
625H1251587.50
630H1261600.20
640H1281625.60
645H1291638.30
650H1301651.00
660H1321676.40
670H1341701.80
680H1361727.20
690H1381752.60
700H1401778.00
710H1421803.40
720H1441828.80
725H1451841.50
730H1461854.20
740H1481879.60
750H1501905.00
760H1521930.40
770H1541955.80
780H1561981.20
785H1571993.90
790H1582006.60
800H1602032.00
810H1622057.40
820H1642082.80
830H1662108.20
840H1682133.60
850H1702159.00
860H1722184.40
870H1742209.80
880H1762235.20
900H1802286.00
910H1822311.40
920H1842336.80
930H1862362.20
940H1882387.60
950H1902413.00
960H1922438.40
980H1962489.20
985H1972501.90
1000H2002540.00
1020H2042590.80
1050H2102667.00
1070H2142717.80
1080H2162743.20
1100H2202794.00
1120H2242844.80
1130H2262870.20
1135H2272882.90
1140H2282895.60
1150H2302921.00
1160H2322946.40
1180H2362997.20
1200H2403048.00
1240H2483149.60
1250H2503175.00
1260H2523200.40
1270H2543225.80
1285H2573263.90
1300H2603302.00
1325H2653365.50
1350H2703429.00
1360H2723454.40
1400H2803556.00
1440H2883657.60
1450H2903683.00
1460H2923708.40
1500H3003810.00
1510H3023835.40
1550H3103937.00
1560H3123962.40
1600H3204064.00
1630H3264140.20
1650H3304191.00
1680H3364267.20
1700H3404318.00
1750H3504445.00
1780H3564521.20
1800H3604572.00
1850H3704699.00
1900H3804826.00
1950H3904953.00
2100H4205334.00

Product Features

S type circular tooth profile economy series timing belt is made of rubber, featuring deviation prevention and wear resistance■ S type circular tooth profile rubber timing belt (S2M/S3M/S5M/S8M/S14M)
Feature 1: Reasonable semi-circular arc tooth profile design can provide higher torque to adapt to high load transmission.
Feature 2: timing belt Reduce the noise generated by high-speed operation.
Feature 3: Tooth peak changes under force, ensuring a longer life than conventional circular tooth profile teeth.
Feature 4: Have certain conductivity
Feature 5: Operating Temperature Range: -30 to 90℃.
Features of P type domestic high-accuracy circular tooth profile timing belt■ P type circular tooth profile rubber timing belt (P5M/P8M)
Feature 1: Reasonable semi-circular arc tooth profile design can provide higher torque to adapt to high load transmission.
Feature 2: Special concave tooth peak design, better reducing noise generated by high-speed operation.
Feature 3: Tooth peak changes under force, ensuring greater accuracy than conventional circular tooth profile teeth.
Feature 4: Have certain conductivity
Feature 5: timing belt Operating Temperature Range: -25 to 80℃.
MXL, XL, L, H trapezoidal tooth profile timing belts are suitable for light load transmission and driving■ Trapezoidal tooth profile rubber timing belt (MXL/XL/H/T5/T10)
Feature 1: Suitable for light load transmission, standard torque driving.
Feature 2: Tooth rubber uses chloroprene to protect core wire, providing excellent bending fatigue resistance, heat resistance, oil resistance
Feature 3: Ideal choice of economical and maintenance-free alternative to traditional transmission method.
Feature 4: Have certain conductivity
Feature 5: timing belt Operating Temperature Range: -30 to 90℃ (MXL/XL/L/H), 0 to 80℃ (T5/T10)

Example of Use

Usage Method Example DrawingInstructions for use of timing wheel and timing belt
The TIMING BELT is installed on the motor and the rotating shaft to transmit the rotational force① Driving (The driven wheel is driven by the driving wheel for transmission)
Transmission belt, used for repeated motion with the object not rotating and high requirements on positioning accuracy② Transmission (Used for repeated motion with the object not rotating and high requirements on positioning accuracy)
Usage Method Example DrawingInstructions for use of timing wheel and timing belt
Plates are conveyed by two timing toothed belts③ Conveyance (Plates are conveyed by two timing toothed belts)
Usage method and example for conveyor belt lifting, repeated positioning motion④ Traction transmission (Workpieces are clamped and transmitted by the belt)

Usage Method

■ Installation method for timing belt transmission
①Turn off the power supply, remove the protective cover, loosen the motor assembly bolts, move the motor so that the belt is loose enough. The timing belt can be removed without prying. Never try to pry the belt down.
②Remove the old belt and check for abnormal wear. Excessive wear may mean that there are problems in the design or maintenance of the transmission device.
③Choose the right timing belt to replace.
④To clean the timing belt and pulley, wipe with a cloth dipped in a small amount of non-volatile liquid. Soaking in detergent or scrubbing the belt with detergent is not advisable. To remove grease, it is also undesirable to wipe with sandpaper or scratch with a sharp object. The belt must be kept dry before installation and use.
⑤Check the pulley for abnormal wear or cracks. If the wear is excessive, the pulley must be replaced.
⑥Check whether the pulley is linearly symmetrical. Linear symmetry of the pulley is essential for the operation of the timing belt, especially the timing belt transmission device.
Asymmetry of the pulley is shown as follows:
 Usage method Installation guide Complete selection Fit installation
⑦Check the remaining transmission device components, such as bearings and bushings, for symmetry, durability, lubrication and other conditions.
⑧Install a new timing belt on the pulley. Never pry or use too much force.
⑨Tighten to narrow the center distance of the transmission device until the tension tester detects that the timing belt tension is appropriate. Turn the driving wheel several times with your hands. Re-test tension.
⑩Tighten the assembly timing belt of the motor and correct the torque. Since any change in the center distance of the transmission device during operation will result in poor belt performance, it is important to ensure that all transmission components have been tightened.
⑪Start the device and observe the timing belt performance to see if there is abnormal vibration, and listen carefully if there is abnormal noise. It is best to turn off the machine and check the conditions of the bearing and motor.

Precautions

① Do not bend the timing belt by force.
It is strictly forbidden to bend the belt, which easily causes breakage
② Do not use in direct contact with water, solvent, oil, acid, alkali, UV, ozone, etc.
Do not directly contact water in operating environmentDo not use in acidic environmentsAvoid contact with alkaline solventsTry not to touch oil liquidsAvoid exposure to strong UV rays
③ Please timing belt avoid using or keeping at extreme high or low temperatures beyond the operating temperature range, or in humid environments.
④ During installation and maintenance, be sure to cut off the power supply and confirm that the machine is completely stopped before proceeding.
⑤ When there may be impurities, be sure to set the guard.

Application Industries

Food Semiconductor Smart phone
It is widely used in food transport and transfer Industry Application Industry Semiconductor Smartphone 3C IPHONE Huawei
Automotive Electronic & Electrical Appliances Medical
Application in automotive assembly production line Method of usage in electronic & electrical and home appliances industry Widely used in medical equipment, blood machines and other related equipment in the biomedical industry

Related Products

High Torque Timing Belt Pulleys S2M Type Flat Timing Belt For General Use Economy Series Toothed Timing Belt
S2M S3M S5M S8M S14M Type
TIMING PULLY High torque timing pulley MISUMI brand Pulley manufacturer S2M FLATBELT Flat belt Conveyor belt Transportation belt MISUMI brand Economy series Domestic S type tooth profile timing belt Low price Short delivery time
Reference timing belt model: HTPA48S2M040-B-N10 Reference timing belt model: HBLT350-4.23 Reference timing belt model: C-HTBN400S2M-40
Reason for recommendation: high transmission power, short delivery time, multiple types Reason for recommendation: intended use for transmission, rich variety of specifications and types Reason for recommendation: rich variety of specifications, high cost performance

Part Number 

  • Incomplete part number.
    Please use left hand selections to complete a part number.    Incomplete part number.
    Please use left hand selections to complete a part number.
Loading...Tải…
30
60
90
  1. << PrevTrước
  2. 4
  3. 5
  4. 6
  5. 7
  6. 8
  7. NextKế tiếp >>
Part Number
C-TBN540H150SALE
C-TBN540H200SALE
C-TBN545H075SALE
C-TBN545H100SALE
C-TBN545H150SALE
C-TBN545H200SALE
C-TBN550H075SALE
C-TBN550H100SALE
C-TBN550H150SALE
C-TBN550H200SALE
C-TBN555H075SALE
C-TBN555H100SALE
C-TBN555H150SALE
C-TBN555H200SALE
C-TBN560H075SALE
C-TBN560H100SALE
C-TBN560H150SALE
C-TBN560H200SALE
C-TBN565H075SALE
C-TBN565H100SALE
C-TBN565H150SALE
C-TBN565H200SALE
C-TBN570H075SALE
C-TBN570H100SALE
C-TBN570H150SALE
C-TBN570H200SALE
C-TBN580H075SALE
C-TBN580H100SALE
C-TBN580H150SALE
C-TBN580H200SALE
C-TBN585H075SALE
C-TBN585H100SALE
C-TBN585H150SALE
C-TBN585H200SALE
C-TBN590H075SALE
C-TBN590H100SALE
C-TBN590H150SALE
C-TBN590H200SALE
C-TBN600H075SALE
C-TBN600H100SALE
C-TBN600H150SALE
C-TBN600H200SALE
C-TBN605H075SALE
C-TBN605H100SALE
C-TBN605H150SALE
C-TBN605H200SALE
C-TBN610H075SALE
C-TBN610H100SALE
C-TBN610H150SALE
C-TBN610H200SALE
C-TBN615H075SALE
C-TBN615H100SALE
C-TBN615H150SALE
C-TBN615H200SALE
C-TBN620H075SALE
C-TBN620H100SALE
C-TBN620H150SALE
C-TBN620H200SALE
C-TBN625H075SALE
C-TBN625H100SALE
C-TBN625H150SALE
C-TBN625H200SALE
C-TBN630H075SALE
C-TBN630H100SALE
C-TBN630H150SALE
C-TBN630H200SALE
C-TBN640H075SALE
C-TBN640H100SALE
C-TBN640H150SALE
C-TBN640H200SALE
C-TBN645H075SALE
C-TBN645H100SALE
C-TBN645H150SALE
C-TBN645H200SALE
C-TBN650H075SALE
C-TBN650H100SALE
C-TBN650H150SALE
C-TBN650H200SALE
C-TBN655H150SALE
C-TBN655H200SALE
C-TBN660H075SALE
C-TBN660H100SALE
C-TBN660H150SALE
C-TBN660H200SALE
C-TBN670H075SALE
C-TBN670H100SALE
C-TBN670H150SALE
C-TBN670H200SALE
C-TBN680H075SALE
C-TBN680H100SALE
Part NumberPriceMinimum Order Qty.Volume DiscountDays to ShipSố ngày giao hàngBelt Width (mm)
(mm) 		Belt Norminal Width (Inch)
(Inch) 		Circumference Length
(mm) 		Number of Teeth

319,456 VND

271,538 VND

4 Piece(s) Available 8 Day(s) 38.11.51371.6108

423,627 VND

360,083 VND

4 Piece(s) Available 8 Day(s) 50.821371.6108

108,231 VND

91,996 VND

4 Piece(s) Available 8 Day(s) 19.10.751384.3109

141,684 VND

120,431 VND

4 Piece(s) Available 8 Day(s) 25.411384.3109

209,019 VND

177,666 VND

4 Piece(s) Available 8 Day(s) 38.11.51384.3109

276,349 VND

234,897 VND

4 Piece(s) Available 8 Day(s) 50.821384.3109

143,131 VND

121,661 VND

4 Piece(s) Available 8 Day(s) 19.10.751397.00110

188,086 VND

159,873 VND

4 Piece(s) Available 8 Day(s) 25.411397.00110

278,671 VND

236,870 VND

4 Piece(s) Available 8 Day(s) 38.11.51397.00110

369,188 VND

313,810 VND

4 Piece(s) Available 8 Day(s) 50.821397.00110

105,055 VND

89,297 VND

1 Piece(s) Available 13 Day(s) 19.10.75--

137,966 VND

117,271 VND

1 Piece(s) Available 13 Day(s) 25.41--

204,421 VND

173,758 VND

1 Piece(s) Available 13 Day(s) 38.11.5--

278,542 VND

236,761 VND

1 Piece(s) Available 13 Day(s) 50.82--

145,602 VND

123,762 VND

4 Piece(s) Available 8 Day(s) 19.10.751422.4112

191,335 VND

162,635 VND

4 Piece(s) Available 8 Day(s) 25.411422.4112

283,618 VND

241,075 VND

4 Piece(s) Available 8 Day(s) 38.11.51422.4112

375,789 VND

319,421 VND

4 Piece(s) Available 8 Day(s) 50.821422.4112

146,837 VND

124,811 VND

4 Piece(s) Available 8 Day(s) 19.10.751435.10113

193,031 VND

164,076 VND

4 Piece(s) Available 8 Day(s) 25.411435.10113

286,089 VND

243,176 VND

4 Piece(s) Available 8 Day(s) 38.11.51435.10113

379,076 VND

322,215 VND

4 Piece(s) Available 8 Day(s) 50.821435.10113

148,074 VND

125,863 VND

4 Piece(s) Available 8 Day(s) 19.10.751447.8114

194,619 VND

165,426 VND

1 Piece(s) Available Same day 25.411447.8114

288,561 VND

245,277 VND

4 Piece(s) Available 8 Day(s) 38.11.51447.8114

382,395 VND

325,036 VND

4 Piece(s) Available 8 Day(s) 50.821447.8114

150,546 VND

127,964 VND

4 Piece(s) Available 8 Day(s) 19.10.751473.2116

197,975 VND

168,279 VND

4 Piece(s) Available 8 Day(s) 25.411473.2116

293,506 VND

249,480 VND

1 Piece(s) Available Same day 38.11.51473.2116

388,928 VND

330,589 VND

4 Piece(s) Available 8 Day(s) 50.821473.2116

112,122 VND

95,304 VND

4 Piece(s) Available 8 Day(s) 19.10.751485.9117

146,779 VND

124,762 VND

4 Piece(s) Available 8 Day(s) 25.411485.9117

216,691 VND

184,187 VND

4 Piece(s) Available 8 Day(s) 38.11.51485.9117

286,638 VND

243,642 VND

4 Piece(s) Available 8 Day(s) 50.821485.9117

113,005 VND

96,054 VND

4 Piece(s) Available 8 Day(s) 19.10.751498.6118

148,015 VND

125,813 VND

4 Piece(s) Available 8 Day(s) 25.411498.6118

218,528 VND

185,749 VND

4 Piece(s) Available 8 Day(s) 38.11.51498.6118

289,078 VND

245,716 VND

4 Piece(s) Available 8 Day(s) 50.821498.6118

155,526 VND

132,197 VND

4 Piece(s) Available 8 Day(s) 19.10.751524120

204,507 VND

173,831 VND

4 Piece(s) Available 8 Day(s) 25.411524120

303,357 VND

257,853 VND

4 Piece(s) Available 8 Day(s) 38.11.51524120

402,172 VND

341,846 VND

4 Piece(s) Available 8 Day(s) 50.821524120

115,690 VND

98,337 VND

4 Piece(s) Available 8 Day(s) 19.10.751536.7121

151,546 VND

128,814 VND

4 Piece(s) Available 8 Day(s) 25.411536.7121

223,899 VND

190,314 VND

4 Piece(s) Available 8 Day(s) 38.11.51536.7121

296,178 VND

251,751 VND

4 Piece(s) Available 8 Day(s) 50.821536.7121

157,997 VND

134,297 VND

4 Piece(s) Available 8 Day(s) 19.10.751549.40122

207,829 VND

176,655 VND

4 Piece(s) Available 8 Day(s) 25.411549.40122

308,304 VND

262,058 VND

4 Piece(s) Available 8 Day(s) 38.11.51549.40122

408,705 VND

347,399 VND

4 Piece(s) Available 8 Day(s) 50.821549.40122

117,524 VND

99,895 VND

4 Piece(s) Available 8 Day(s) 19.10.751562.1123

153,984 VND

130,886 VND

4 Piece(s) Available 8 Day(s) 25.411562.1123

227,501 VND

193,376 VND

4 Piece(s) Available 8 Day(s) 38.11.51562.1123

301,018 VND

255,865 VND

4 Piece(s) Available 8 Day(s) 50.821562.1123

118,409 VND

100,648 VND

4 Piece(s) Available 8 Day(s) 19.10.751574.8124

155,150 VND

131,878 VND

4 Piece(s) Available 8 Day(s) 25.411574.8124

229,268 VND

194,878 VND

4 Piece(s) Available 8 Day(s) 38.11.51574.8124

303,385 VND

257,877 VND

4 Piece(s) Available 8 Day(s) 50.821574.8124

119,293 VND

101,399 VND

4 Piece(s) Available 8 Day(s) 19.10.751587.5125

156,387 VND

132,929 VND

4 Piece(s) Available 8 Day(s) 25.411587.5125

231,104 VND

196,438 VND

4 Piece(s) Available 8 Day(s) 38.11.51587.5125

305,824 VND

259,950 VND

4 Piece(s) Available 8 Day(s) 50.821587.5125

162,940 VND

138,499 VND

4 Piece(s) Available 8 Day(s) 19.10.751600.2126

214,398 VND

182,238 VND

4 Piece(s) Available 8 Day(s) 25.411600.2126

318,190 VND

270,462 VND

4 Piece(s) Available 8 Day(s) 38.11.51600.2126

421,913 VND

358,626 VND

4 Piece(s) Available 8 Day(s) 50.821600.2126

122,014 VND

103,712 VND

4 Piece(s) Available 8 Day(s) 19.10.751625.6128

159,919 VND

135,931 VND

4 Piece(s) Available 8 Day(s) 25.411625.6128

236,475 VND

201,004 VND

4 Piece(s) Available 8 Day(s) 38.11.51625.6128

312,925 VND

265,986 VND

4 Piece(s) Available 8 Day(s) 50.821625.6128

148,443 VND

126,177 VND

4 Piece(s) Available 8 Day(s) 19.10.751638.3129

195,593 VND

166,254 VND

4 Piece(s) Available 8 Day(s) 25.411638.3129

289,967 VND

246,472 VND

4 Piece(s) Available 8 Day(s) 38.11.51638.3129

384,309 VND

326,663 VND

4 Piece(s) Available 8 Day(s) 50.821638.3129

167,885 VND

142,702 VND

4 Piece(s) Available 8 Day(s) 19.10.751651130

221,001 VND

187,851 VND

4 Piece(s) Available 8 Day(s) 25.411651130

328,080 VND

278,868 VND

4 Piece(s) Available 8 Day(s) 38.11.51651130

435,049 VND

369,792 VND

4 Piece(s) Available 8 Day(s) 50.821651130

241,845 VND

205,568 VND

4 Piece(s) Available 8 Day(s) 38.11.51663.7131

320,130 VND

272,111 VND

4 Piece(s) Available 8 Day(s) 50.821663.7131

170,357 VND

144,803 VND

4 Piece(s) Available 8 Day(s) 19.10.751676.4132

224,249 VND

190,612 VND

1 Piece(s) Available Same day 25.411676.4132

333,024 VND

283,070 VND

4 Piece(s) Available 8 Day(s) 38.11.51676.4132

441,690 VND

375,437 VND

4 Piece(s) Available 8 Day(s) 50.821676.4132

127,384 VND

108,276 VND

4 Piece(s) Available 8 Day(s) 19.10.751701.8134

167,126 VND

142,057 VND

4 Piece(s) Available 8 Day(s) 25.411701.8134

247,180 VND

210,103 VND

4 Piece(s) Available 8 Day(s) 38.11.51701.8134

327,337 VND

278,236 VND

4 Piece(s) Available 8 Day(s) 50.821701.8134

175,303 VND

149,008 VND

4 Piece(s) Available 8 Day(s) 19.10.751727.2136

230,853 VND

196,225 VND

4 Piece(s) Available 8 Day(s) 25.411727.2136

Loading...Tải…

  1. << PrevTrước
  2. 4
  3. 5
  4. 6
  5. 7
  6. 8
  7. NextKế tiếp >>

Basic InformationThông tin cơ bản

Belt Type H Belt Shape Closed End Belt Material Rubber Belt
Belt Tooth Surface Standard (Single Sided) Core Wire Material Glass Fiber Belt Shape Type Trapezoidal Tooth Profile Circular Type
Transmission Torque Regular Torque Transmission

Frequently asked question (FAQ)FAQ

Question:Question: Why is the order model of the timing belt inconsistent with the actual belt label and engraving?
Answer:Answer: Order model is MISUMI product model, the label on the belt or printed model on the belt surface is the belt manufacturer model, which varies with manufacturer, but there will be no influence on the product itself.
Question:Question: The timing belt has been broken after use for a very short period of time. Is there a problem with the quality of the belt?
Answer:Answer: The timing belt is a standard product, and the same batch of products have very few individual quality problems, please refer to P.2875【Main causes of premature breakage and corresponding countermeasures】to troubleshoot the equipment in use.
Question:Question: Can alteration be made to the timing belt?
Answer:Answer: Alteration cannot be made to the circumference of the timing belt, and partial alteration can be made to the width.
Question:Question: What kind of belt is better to use under conditions that require high cleanliness?
Answer:Answer: The use of urethane belts is recommended, which has significantly improved dust drop, compared to the rubber belt.
Question:Question: What are the two main types of timing belts according to their functions? What is the role?
Answer:Answer: Timing belts are mainly divided into transmission type and driving type. For transmission type, the load can be placed on the timing belt surface for transmission. For driving type, no load is carried, and only the role of transmitting torque is played, which is similar to the role of chain.
Question:Question: How to judge or measure whether the belt tension meets the installation requirements?
Answer:Answer: It is recommended that the customer purchase the tension meter by himself and make a judgment according to the calculation formula of the initial design.
Question:Question: Which tooth type of the timing belt has the smallest clearance? What will it affect?
Answer:Answer: The arc tooth type has minimum clearance, which can improve such indicators as positioning accuracy and rigidity.

Check other FAQ (4 items) HideĐóng.

About MISUMIVề Misumi

About this WebsiteVề trang Web này

Useful ToolsCác công cụ hữu ích

Customer ServiceDịch vụ chăm sóc khách hàng

MISUMI Contact Monday to Saturday: 8:00 am - 5:00 pm Order cut off time is 5:00 pm Thứ 2 đến Thứ 7: 8 giờ sáng đến 5 giờ chiều Hạn chót đặt hàng là 5 giờ chiều

  • Tel:Số điện thoại:0222-361-1555
  • Fax:Số Fax:0222-361-2555
  • InquiryYêu cầu

MISUMI APP

MISUMI APP QR

Install MISUMI APP

Mobile View Xem trên điện thoại

MISUMI Vietnam Company Limited, Legal Representative: Tomohiro Watanabe,
phone: 0222-361-1555, e-mail: cs@misumi.com.vn, Enterprise Code: 0107514576,
Date of Issuance: 22 July 2016, Place of Issuance: Bac Ninh, Business Certificate No. 6573041568-KD dated 27 September 2016 issued by the People's Committee of Bac Ninh

Công ty TNHH MISUMI Việt Nam, Đại diện theo pháp luật: Tomohiro Watanabe,
Điện thoại: 0222-361-1555, e-mail: cs@misumi.com.vn, Mã số doanh nghiệp: 0107514576,
ngày cấp 22/7/2016, nơi cấp: Bắc Ninh, Giấy phép kinh doanh số: 6573041568-KD ngày cấp 27/9/2016 bởi UBND tỉnh Bắc Ninh

online.gov.vn

Copyright © MISUMI Corporation All Rights Reserved.