Roughing End Mills (Carbide)

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide End Mills Roughing Fine Pitch Silent Type_SI-WC-RESF

  OSG

  [Notice] Alterations can now be specified. Please select from "Standard/Alterations Category" of narrowing conditions.[Features]・ Achieves "quiet heavy-duty cutting" with unequal flute spacing of the bottom flute and unequal lead shape of the outer edge.・ Work Material: General steel, heat-treated steel, stainless steel, cast iron, copper, aluminum, titanium

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  5 ～ 20H	13 ～ 38	-	6 ～ 20	3 ～ 4	60 ～ 105	general steel[○/◎] / Quenched and tempered steel[○] / Stainless Steel[○/◎] / Cast Iron[○/◎] / Aluminum[○] / Titanium[○/◎] / Copper[○]	Variable lead	Plane / Side / Inclined Cuts	-	C plane	Roughing

  From: 2,901,478 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  VAC Series Carbide Roughing End Mill

  MISUMI

  [Features]・High-speed rotation is possible by adopting a 45° helix. ・Using a fine pitch nick, the surface roughness after processing is also excellent. ・The conductivity is minimal. 《Additional machining》・Additional neck relief machining can be specified using MISUMI standard tools. ・No need to create drawings. You can order by simply specifying the dimensions using the model number. ・Available starting from 1 piece, ``just the quantity you need when you need it.'' ・Delivered on the 3rd day.

  • Volume Discount

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 12	8 ～ 30	-	6 ～ 12	3 ～ 4	50 ～ 80	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○]	-	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	-	-	Roughing

  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  STN Tornado End Mill MA

  ASAHI TOOLS

  Ideal for side and groove machining of castings, carbon steel, stainless steel, and hard-to-cut material (up to HRC 65). Capable of radial cutting depth of 1/8 D in semi-finishing and finishing of high-hardness steel.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 20	3 ～ 80	-	6 ～ 20	4 ～ 8	45 ～ 140	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / Stainless Steel[◎] / Cast Iron[○]	Standard torsion (30-40°)	Side / Groove	TiN	With Lead	Square

  From: 1,716,238 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  3-5-Flute Roughing (SUS-CUT)

  YG 1

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 20	-	-	6 ～ 20	3 ～ 5	-	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Titanium[◎]	-	Plane / Side / Groove / Inclined Cuts	TiAlN	-	Roughing

  From: 491,283 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  4-Flute Fine Pitch Roughing End Mill

  OSG KOREA CORP

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  6 ～ 20	13 ～ 38	-	6 ～ 20	4	50 ～ 105	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○]	Powerful Torsion (45°-60°)	Plane / Side / Inclined Cuts	FX	-	Roughing

  From: 1,062,114 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  OptiMill® SCM451 Composite Material End Mill (8 Flutes Internally Lubricated Type)

  MAPAL

  [Features]· By using multiple blades, it achieves high efficiency machining (high feed) of composite materials such as CFRP, etc.[Applications]· Work materials: Composites such as CFRP, etc.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  6 ～ 20	28 ～ 45	-	6 ～ 20	8	72 ～ 104	-	-	-	-	-	Roughing

  From: 19,015,897 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Roughing End Mill, 4-Flute GM-4W

  KABUSYUUKOUGU

  GM Series end mill that has both high hardness and elastic modulus due to the use of carbide material and features the reasonable balance with the good cutting quality. It can extend the tool lifespan.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  6 ～ 20	16 ～ 45	-	6 ～ 20	4	50 ～ 100	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎]	Standard torsion (30-40°)	Side / Groove	TiAlN	-	Roughing

  From: 500,571 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  High Chip Flow Performance Wave Shaped Blade for Ruffing 3RDSM, 4RDSM, 5RDSM (Medium)

  KYOCERA

  ·Roughing corrugated cutting edge·For coarse machining, the repertoire includes 3, 4, and 5 flutes.The sine curve cutting edge reduces cutting force.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  5 ～ 8	13 ～ 16	-	6 ～ 8	3	57 ～ 63	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎]	Weak torsion (15 to 25˚)	Plane / Side / Groove	TiAlN	-	Roughing

  From: 1,842,672 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  3-Flute Roughing End Mill for Aluminum Processing

  YG 1

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  6 ～ 30	13 ～ 45	-	6 ～ 25	3	57 ～ 121	general steel[◎] / Quenched and tempered steel[◎] / Aluminum[◎] / Copper[○]	Standard torsion (30-40°)	Plane / Side / Groove / Inclined Cuts	-	-	Roughing

  From: 997,305 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide 3-Flute Wave Roughing End Mill for Aluminum

  DYC

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  16	48	-	16	3	105	-	-	-	-	-	Long-Neck Square

  From: 5,309,551 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s)

  7 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide 4-Flute Roughing/Finishing Coated End Mill

  DYC

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  6 ～ 16	14 ～ 34	-	6 ～ 16	4	52 ～ 105	-	-	-	-	-	Roughing

  From: 1,011,112 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s)

  7 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  SPEED/T 3/4 Flute 40°Roughing

  Poulten&Graf

  [Features]· Fine pitch 40° torsion angle is ideal for roughing HRC 45 or below mild steels at a low cost.· Low cutting depth and long operating life.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  5 ～ 20	13 ～ 45	-	6 ～ 20	3 ～ 4	50 ～ 100	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○]	Standard torsion (30-40°)	Side / Groove / Plunging (Z feed) / Inclined Cuts	-	-	Roughing

  From: 1,135,641 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  OptiMill® Carbide Rough & Finish End Mill (Multi Fluted)

  MAPAL

  [Features]· "Rough & Finish" design supports rough to medium finishing using a single tool.· The cutting edge is chamfered (excluding ø6) for higher rigidity.[Applications]· Work materials: Carbon steel, alloy steel, cast iron, stainless steel.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  6 ～ 20	13 ～ 38	-	6 ～ 20	3 ～ 4	57 ～ 104	-	-	-	-	-	Roughing

  From: 2,111,194 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  GSX MILL VL Roughing 2.5D GSXVLRE4-2.5D

  NACHI(FUJIKOSHI)

  [Features]· Unequal division and unequal lead increase fracture resistance in high-speed and high-efficiency processing.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  4 ～ 20	10 ～ 50	-	6 ～ 20	4	45 ～ 100	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Graphite[○]	Variable lead	Side / Groove	For General Steels (AlCrN, etc.)	C plane	Roughing

  From: 2,071,014 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Diamond coated multiple flute finishing rooter_DIA-MFC

  OSG

  Processing application (processing shape) sideTool material: CarbideWork Material: Graphite/ResinCoating for non-ferrous metals (Diamond coating)Standard/Alteration category: Manufacturer's standard product

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  6 ～ 10	18 ～ 30	-	6 ～ 10	8 ～ 12	80 ～ 100	-	-	-	Dia Coat	-	Square

  From: 4,634,215 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  XAC series carbide roughing end mill, fine pitch / regular model

  MISUMI

  Strongly supports the cost reduction of roughing with the limited special price for standard sizes

  • Volume Discount

  • TiAlN
  • General Steel
  • R (Regular)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  6 ～ 20	16 ～ 38	-	6 ～ 20	3 ～ 4	57 ～ 104	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Weak torsion (15 to 25˚)	Plane / Side / Groove / Inclined Cuts	TiAlN	C plane	Roughing

  From: 1,478,634 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide roughing end mill, fine pitch / short model

  MISUMI

  [Features]·Roughing end mill capable of coarse and middle to coarse machining with fine pitch nick·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 4 Flutes
  • S (Short)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  5 ～ 20	10 ～ 38	17 ～ 66	6 ～ 20	4	57 ～ 104	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Weak torsion (15 to 25˚)	Plane / Side / Inclined Cuts	For High Hardness (Silicon Group)	Micro R	Roughing

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide roughing end mill, fine pitch / regular model

  MISUMI

  [Features]·Roughing end mill capable of coarse and middle to coarse machining with fine pitch nick·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • R (Regular)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 20	15 ～ 45	20 ～ 92	6 ～ 20	3 ～ 4	60 ～ 130	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Weak torsion (15 to 25˚)	Plane / Side / Groove / Inclined Cuts	For High Hardness (Silicon Group)	Micro R	Roughing

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide roughing end mill, fine pitch / long model

  MISUMI

  [Features]·Roughing end mill capable of coarse and middle to coarse machining with fine pitch nick·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 4 Flutes
  • L (Long)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  6 ～ 20	25 ～ 65	30 ～ 112	6 ～ 20	4	100 ～ 150	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Weak torsion (15 to 25˚)	Plane / Side / Inclined Cuts	For High Hardness (Silicon Group)	Micro R	Roughing

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide roughing end mill, fine pitch / long regular model

  MISUMI

  [Features]·Roughing end mill capable of coarse and middle to coarse machining with fine pitch nick·Long shank type ideal for deep cavity milling·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • R (Regular)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  5 ～ 20	15 ～ 45	20 ～ 95	6 ～ 20	3 ～ 4	100 ～ 150	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Weak torsion (15 to 25˚)	Plane / Side / Groove / Inclined Cuts	For High Hardness (Silicon Group)	Micro R	Roughing

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide roughing end mill, 45° spiral / fine pitch / short model

  MISUMI

  [Features]·High-speed rotation processing is possible by adopting 45° helix angle·Roughing end mill capable of coarse and middle to coarse machining with fine pitch nick·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • S (Short)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  5 ～ 20	10 ～ 38	17 ～ 72	6 ～ 20	3 ～ 4	60 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Powerful Torsion (45°-60°)	Plane / Side / Groove / Inclined Cuts	For High Hardness (Silicon Group)	C plane	Roughing

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide roughing end mill, 45° spiral / fine pitch / regular model

  MISUMI

  [Features]·High-speed rotation processing is possible by adopting 45° helix angle·Roughing end mill capable of coarse and middle to coarse machining with fine pitch nick·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • R (Regular)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 20	15 ～ 45	20 ～ 92	6 ～ 20	3 ～ 4	60 ～ 130	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Powerful Torsion (45°-60°)	Plane / Side / Groove / Inclined Cuts	For High Hardness (Silicon Group)	C plane	Roughing

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide roughing end mill, 45° spiral / fine pitch / long model

  MISUMI

  [Features]·High-speed rotation processing is possible by adopting 45° helix angle·Roughing end mill capable of coarse and middle to coarse machining with fine pitch nick·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • L (Long)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  6 ～ 20	25 ～ 65	30 ～ 112	6 ～ 20	3 ～ 4	100 ～ 150	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Powerful Torsion (45°-60°)	Plane / Side / Groove / Inclined Cuts	For High Hardness (Silicon Group)	C plane	Roughing

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TS coated carbide roughing end mill, 45°spiral, fine pitch / long shank, regular model

  MISUMI

  [Features]·High-speed rotation processing is possible by adopting 45° helix angle·Roughing end mill capable of coarse and middle to coarse machining with fine pitch nick·Long shank type ideal for deep cavity milling·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties

  • Volume Discount

  • TS
  • General Steel
  • R (Regular)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  6 ～ 20	15 ～ 45	20 ～ 95	6 ～ 20	3 ～ 4	100 ～ 150	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Aluminum[○] / Copper[○]	Powerful Torsion (45°-60°)	Plane / Side / Groove / Inclined Cuts	For High Hardness (Silicon Group)	C plane	Roughing

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  DLC Coated Carbide Roughing End Mill for Aluminum Machining, 3-Flute / Regular Model

  MISUMI

  Popular DLC coated type of aluminum roughing

  • Volume Discount

  • DLC
  • Aluminum
  • 3 Flutes
  • R (Regular)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  5 ～ 20	15 ～ 45	20 ～ 70	6 ～ 20	3	57 ～ 100	Aluminum[◎] / Copper[○] / Resin[○]	Standard torsion (30-40°)	Plane / Side / Groove / Inclined Cuts	DLC	Micro R	Roughing

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Roughing End Mill for Aluminum Machining, 3-Flute / Regular Model

  MISUMI

  Significantly reduces the roughing time of aluminum

  • Volume Discount

  • Non-Coated
  • Aluminum
  • 3 Flutes
  • R (Regular)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  5 ～ 20	15 ～ 45	20 ～ 70	6 ～ 20	3	57 ～ 100	Aluminum[◎] / Copper[○]	Standard torsion (30-40°)	Plane / Side / Groove / Inclined Cuts	Non-Coated	Micro R	Roughing

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  GS MILL Heavy GSHV

  NACHI(FUJIKOSHI)

  Ideal for rough and medium finishing of materials from steel to stainless steel. High performance machining with BT30 machines is possible with little cutting resistance.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  6 ～ 20	13 ～ 38	-	6 ～ 20	4	50 ～ 100	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	Standard torsion (30-40°)	Plane / Side / Groove / Inclined Cuts	TiAlN	With Lead	Roughing

  From: 2,135,194 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  GS MILL Roughing GSRE

  NACHI(FUJIKOSHI)

  Capable of high-speed and high-efficiency roughing of materials from steel to stainless steel.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  6 ～ 20	13 ～ 38	-	6 ～ 20	4	50 ～ 100	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	Standard torsion (30-40°)	Plane / Side / Groove / Inclined Cuts	TiAlN	With Lead	Roughing

  From: 2,136,177 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  GSX MILL Roughing 2.5D GSXRE-2.5D

  NACHI(FUJIKOSHI)

  Improved fracture resistance when used at high speeds for high efficiency. The GSX coating further improves heat resistance and abrasion resistance.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  4 ～ 20	10 ～ 50	-	6 ～ 20	4	45 ～ 100	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	Standard torsion (30-40°)	Plane / Side / Groove / Inclined Cuts	For General Steels (AlCrN, etc.)	With Lead	Roughing

  From: 1,909,694 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Router for CFRP Fine Pitch with Nick_DIA-BNC

  OSG

  A router that adopts a diamond coating with excellent abrasion resistance.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  4 ～ 12	12 ～ 36	-	4 ～ 12	6 ～ 14	62 ～ 94	Resin[◎]	No torsion	Plane / Side / Inclined Cuts	Dia Coat	With Lead	Roughing

  From: 4,049,865 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Router for CFRP Herring Bone Type_DIA-HBC4

  OSG

  Standard in-stock item, sold by designated agencies.[Features]· A router that adopts a diamond coating with excellent abrasion resistance.· 4 base blades

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  6 ～ 10	15 ～ 25	-	6 ～ 10	4	65 ～ 75	-	Standard torsion (30-40°)	Plane / Side / Inclined Cuts	Dia Coat	With Lead	Roughing

  From: 3,598,197 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  WX Coated Roughing_WX-RESF

  OSG

  As the corrugated blade shape reduces cutting power, large cutting depth is possible. Also resilient to chatter, it is possible to improve the efficiency of roughing.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  7 ～ 25	16 ～ 45	-	8 ～ 25	4 ～ 6	60 ～ 120	general steel[○/◎] / Quenched and tempered steel[○/◎] / Stainless Steel[○/◎] / Cast Iron[○/◎] / Aluminum[○] / Titanium[○/◎] / Copper[○]	Standard torsion (30-40°) / Powerful Torsion (45°-60°)	Plane / Side / Inclined Cuts	TiAlN	C plane	Roughing

  From: 3,367,395 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  FAGCNα, FA Coated Carbide Nα Nick

  SANKO MFG

  [Features]· Machining is possible with a wide range of materials, from raw materials to hardened steel.· New shape and new surface processing provide excellent chipping resistance and chip discharge.· A new standard considering usability of the blade length is adopted.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 25	10 ～ 62	22 ～ 57	3 ～ 25	3 ～ 4	50 ～ 140	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○]	Standard torsion (30-40°)	Plane / Side / Groove / Inclined Cuts	TiAlN	C plane	Roughing

  From: 2,261,626 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SAGCVα SA Coated Carbide Victory α Nick

  SANKO MFG

  [Features]· Machining is possible with a wide range of materials, from raw materials to hardened steel.· Newly developed nick/cross-section shape provide excellent chipping resistance and chip discharge.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  5 ～ 20	13 ～ 38	18	6 ～ 20	4	50 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○]	Standard torsion (30-40°)	Plane / Side / Groove / Inclined Cuts	TiAlN	C plane	Roughing

  From: 2,167,653 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SAGCα SA Coated Carbide α Nick

  SANKO MFG

  [Features]· With a unique roughing blade shape, heavy machining and high speed machining are possible

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  5 ～ 25	15 ～ 60	22 ～ 55	6 ～ 25	4	60 ～ 140	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	Standard torsion (30-40°)	Plane / Side / Groove / Inclined Cuts	TiAlN	C plane	Roughing

  From: 2,481,550 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SCT S Cut End Mill MX30

  ASAHI TOOLS

  JIS usage classification symbol. Uses a tip material equivalent to M30 for roughing. Improves rough machining performance for nonferrous metals, cast iron, steel, etc.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  20 ～ 40	40 ～ 80	-	20 ～ 42	4	130 ～ 180	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	Weak torsion (15 to 25˚)	Side / Groove	Non-Coated	C plane	Roughing

  From: 11,993,296 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SCT Long S-Cut End Mill MX30

  ASAHI TOOLS

  JIS usage classification symbol. Uses a tip material equivalent to M30 for roughing. Improves rough machining performance for nonferrous metals, cast iron, steel, etc.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  20 ～ 40	60 ～ 120	-	20 ～ 42	4	150 ～ 220	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	Weak torsion (15 to 25˚)	Side / Groove	Non-Coated	C plane	Roughing

  From: 14,491,345 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SPSRC4A SP Series Roughing End Mill 4-Flute OK Coat

  OKAZAKI SEIKO

  Its unique roughing shape and the effect of OK coating enable heavy cutting and high speed machining.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  5 ～ 25	12 ～ 45	-	4 ～ 25	4	50 ～ 120	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○]	Weak torsion (15 to 25˚)	Plane / Side / Groove	TiAlN	C plane	Roughing

  From: 1,396,658 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SRE3 Roughing End Mill for Aluminum, 3-Flute, Non-Coated

  OKAZAKI SEIKO

  High-helix roughing end mill that demonstrates outstanding power for rough machining of aluminum materials.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  6 ～ 20	15 ～ 45	-	6 ～ 20	3	50 ～ 105	Aluminum[◎] / Copper[○]	Standard torsion (30-40°)	Plane / Side / Groove	Non-Coated	C plane	Roughing

  From: 2,180,736 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SRE3D Roughing End Mill for Aluminum, 3-Flute, Pure DLC-Coated

  OKAZAKI SEIKO

  Pure DLC coating prevents chip welding, providing a surprisingly long lifespan.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  6 ～ 20	15 ～ 45	-	6 ～ 20	3	50 ～ 105	Aluminum[◎] / Copper[◎]	Standard torsion (30-40°)	Plane / Side / Groove	DLC	C plane	Roughing

  From: 3,463,444 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Roughing End Mill for Aluminum Machining AL-OCRL Type

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  6 ～ 30	26 ～ 82	-	6 ～ 25	3	75 ～ 180	Aluminum[◎]	Standard torsion (30-40°)	Side	Non-Coated	Sharp Edge	Roughing

  From: 3,619,090 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Roughing End Mill for Aluminum Machining AL-OCRS-LS Type

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  6 ～ 30	9 ～ 46	-	5 ～ 25	3	75 ～ 180	Aluminum[◎]	Standard torsion (30-40°)	Side	Non-Coated	Sharp Edge	Roughing

  From: 2,598,355 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Roughing End Mill for Aluminum Machining AL-OCRS-XLS Type

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  6 ～ 20	9 ～ 30	-	5 ～ 18	3	100 ～ 250	Aluminum[◎]	Standard torsion (30-40°)	Side	Non-Coated	Sharp Edge	Roughing

  From: 2,834,615 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Roughing End Mill for Aluminum Machining AL-OCRS Type

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 30	6 ～ 51	-	4 ～ 25	3	50 ～ 140	Aluminum[◎]	Standard torsion (30-40°)	Side / Groove	Non-Coated	Sharp Edge	Roughing

  From: 2,180,023 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  One Cut Rough DZ-OCRS

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  4 ～ 25	8 ～ 50	-	6 ～ 25	3 ～ 4	55 ～ 130	general steel[◎] / Quenched and tempered steel[◎] / Cast Iron[◎]	Weak torsion (15 to 25˚)	Side / Groove	TiAlN	-	Roughing

  From: 4,788,828 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
SpecificationsĐặc điểm kĩ thuật
Blade diameter (D)(φ)
Blade length (ℓ)(mm)
Underneck length (ℓ1)(mm)
Shank diameter (d)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
Torsion Angle (θ)
Machining Application
Coating
Blade tip shape
Type

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	OSG	MISUMI	ASAHI TOOLS	YG 1	OSG KOREA CORP	MAPAL	KABUSYUUKOUGU	KYOCERA	YG 1	DYC	DYC	Poulten&Graf	MAPAL	NACHI(FUJIKOSHI)	OSG	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	OSG	OSG	OSG	SANKO MFG	SANKO MFG	SANKO MFG	ASAHI TOOLS	ASAHI TOOLS	OKAZAKI SEIKO	OKAZAKI SEIKO	OKAZAKI SEIKO	DIJET	DIJET	DIJET	DIJET	DIJET
Product SeriesDòng sản phẩm	Carbide End Mills Roughing Fine Pitch Silent Type_SI-WC-RESF	VAC Series Carbide Roughing End Mill	STN Tornado End Mill MA	3-5-Flute Roughing (SUS-CUT)	4-Flute Fine Pitch Roughing End Mill	OptiMill® SCM451 Composite Material End Mill (8 Flutes Internally Lubricated Type)	Carbide Roughing End Mill, 4-Flute GM-4W	High Chip Flow Performance Wave Shaped Blade for Ruffing 3RDSM, 4RDSM, 5RDSM (Medium)	3-Flute Roughing End Mill for Aluminum Processing	Carbide 3-Flute Wave Roughing End Mill for Aluminum	Carbide 4-Flute Roughing/Finishing Coated End Mill	SPEED/T 3/4 Flute 40°Roughing	OptiMill® Carbide Rough & Finish End Mill (Multi Fluted)	GSX MILL VL Roughing 2.5D GSXVLRE4-2.5D	Diamond coated multiple flute finishing rooter_DIA-MFC	XAC series carbide roughing end mill, fine pitch / regular model	TSC series carbide roughing end mill, fine pitch / short model	TSC series carbide roughing end mill, fine pitch / regular model	TSC series carbide roughing end mill, fine pitch / long model	TSC series carbide roughing end mill, fine pitch / long regular model	TSC series carbide roughing end mill, 45° spiral / fine pitch / short model	TSC series carbide roughing end mill, 45° spiral / fine pitch / regular model	TSC series carbide roughing end mill, 45° spiral / fine pitch / long model	TS coated carbide roughing end mill, 45°spiral, fine pitch / long shank, regular model	DLC Coated Carbide Roughing End Mill for Aluminum Machining, 3-Flute / Regular Model	Carbide Roughing End Mill for Aluminum Machining, 3-Flute / Regular Model	GS MILL Heavy GSHV	GS MILL Roughing GSRE	GSX MILL Roughing 2.5D GSXRE-2.5D	Router for CFRP Fine Pitch with Nick_DIA-BNC	Router for CFRP Herring Bone Type_DIA-HBC4	WX Coated Roughing_WX-RESF	FAGCNα, FA Coated Carbide Nα Nick	SAGCVα SA Coated Carbide Victory α Nick	SAGCα SA Coated Carbide α Nick	SCT S Cut End Mill MX30	SCT Long S-Cut End Mill MX30	SPSRC4A SP Series Roughing End Mill 4-Flute OK Coat	SRE3 Roughing End Mill for Aluminum, 3-Flute, Non-Coated	SRE3D Roughing End Mill for Aluminum, 3-Flute, Pure DLC-Coated	Roughing End Mill for Aluminum Machining AL-OCRL Type	Roughing End Mill for Aluminum Machining AL-OCRS-LS Type	Roughing End Mill for Aluminum Machining AL-OCRS-XLS Type	Roughing End Mill for Aluminum Machining AL-OCRS Type	One Cut Rough DZ-OCRS
From	2,901,478 VND		1,716,238 VND	491,283 VND	1,062,114 VND	19,015,897 VND	500,571 VND	1,842,672 VND	997,305 VND	5,309,551 VND	1,011,112 VND	1,135,641 VND	2,111,194 VND	2,071,014 VND	4,634,215 VND	1,478,634 VND											2,135,194 VND	2,136,177 VND	1,909,694 VND	4,049,865 VND	3,598,197 VND	3,367,395 VND	2,261,626 VND	2,167,653 VND	2,481,550 VND	11,993,296 VND	14,491,345 VND	1,396,658 VND	2,180,736 VND	3,463,444 VND	3,619,090 VND	2,598,355 VND	2,834,615 VND	2,180,023 VND	4,788,828 VND
Days to ShipSố ngày giao hàng	6 Day(s) or more	Same day or more	6 Day(s) or more	4 Day(s) or more	6 Day(s) or more	9 Day(s) or more	4 Day(s) or more	6 Day(s) or more	4 Day(s) or more	7 Day(s)	7 Day(s)	6 Day(s) or more	9 Day(s) or more	6 Day(s) or more	6 Day(s) or more	Same day or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	10 Day(s) or more	10 Day(s) or more	7 Day(s) or more	6 Day(s) or more	8 Day(s) or more	6 Day(s) or more	8 Day(s) or more
SpecificationsĐặc điểm kĩ thuật																TiAlN General Steel R (Regular)	TS General Steel 4 Flutes S (Short)	TS General Steel R (Regular)	TS General Steel 4 Flutes L (Long)	TS General Steel R (Regular)	TS General Steel S (Short)	TS General Steel R (Regular)	TS General Steel L (Long)	TS General Steel R (Regular)	DLC Aluminum 3 Flutes R (Regular)	Non-Coated Aluminum 3 Flutes R (Regular)
Blade diameter (D)(φ)	5 ～ 20H	3 ～ 12	3 ～ 20	3 ～ 20	6 ～ 20	6 ～ 20	6 ～ 20	5 ～ 8	6 ～ 30	16	6 ～ 16	5 ～ 20	6 ～ 20	4 ～ 20	6 ～ 10	6 ～ 20	5 ～ 20	3 ～ 20	6 ～ 20	5 ～ 20	5 ～ 20	3 ～ 20	6 ～ 20	6 ～ 20	5 ～ 20	5 ～ 20	6 ～ 20	6 ～ 20	4 ～ 20	4 ～ 12	6 ～ 10	7 ～ 25	3 ～ 25	5 ～ 20	5 ～ 25	20 ～ 40	20 ～ 40	5 ～ 25	6 ～ 20	6 ～ 20	6 ～ 30	6 ～ 30	6 ～ 20	3 ～ 30	4 ～ 25
Blade length (ℓ)(mm)	13 ～ 38	8 ～ 30	3 ～ 80	-	13 ～ 38	28 ～ 45	16 ～ 45	13 ～ 16	13 ～ 45	48	14 ～ 34	13 ～ 45	13 ～ 38	10 ～ 50	18 ～ 30	16 ～ 38	10 ～ 38	15 ～ 45	25 ～ 65	15 ～ 45	10 ～ 38	15 ～ 45	25 ～ 65	15 ～ 45	15 ～ 45	15 ～ 45	13 ～ 38	13 ～ 38	10 ～ 50	12 ～ 36	15 ～ 25	16 ～ 45	10 ～ 62	13 ～ 38	15 ～ 60	40 ～ 80	60 ～ 120	12 ～ 45	15 ～ 45	15 ～ 45	26 ～ 82	9 ～ 46	9 ～ 30	6 ～ 51	8 ～ 50
Underneck length (ℓ1)(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	17 ～ 66	20 ～ 92	30 ～ 112	20 ～ 95	17 ～ 72	20 ～ 92	30 ～ 112	20 ～ 95	20 ～ 70	20 ～ 70	-	-	-	-	-	-	22 ～ 57	18	22 ～ 55	-	-	-	-	-	-	-	-	-	-
Shank diameter (d)(mm)	6 ～ 20	6 ～ 12	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 8	6 ～ 25	16	6 ～ 16	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 10	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 20	4 ～ 12	6 ～ 10	8 ～ 25	3 ～ 25	6 ～ 20	6 ～ 25	20 ～ 42	20 ～ 42	4 ～ 25	6 ～ 20	6 ～ 20	6 ～ 25	5 ～ 25	5 ～ 18	4 ～ 25	6 ～ 25
Number of flutes(sheet)	3 ～ 4	3 ～ 4	4 ～ 8	3 ～ 5	4	8	4	3	3	3	4	3 ～ 4	3 ～ 4	4	8 ～ 12	3 ～ 4	4	3 ～ 4	4	3 ～ 4	3 ～ 4	3 ～ 4	3 ～ 4	3 ～ 4	3	3	4	4	4	6 ～ 14	4	4 ～ 6	3 ～ 4	4	4	4	4	4	3	3	3	3	3	3	3 ～ 4
Overall Length (L)(mm)	60 ～ 105	50 ～ 80	45 ～ 140	-	50 ～ 105	72 ～ 104	50 ～ 100	57 ～ 63	57 ～ 121	105	52 ～ 105	50 ～ 100	57 ～ 104	45 ～ 100	80 ～ 100	57 ～ 104	57 ～ 104	60 ～ 130	100 ～ 150	100 ～ 150	60 ～ 110	60 ～ 130	100 ～ 150	100 ～ 150	57 ～ 100	57 ～ 100	50 ～ 100	50 ～ 100	45 ～ 100	62 ～ 94	65 ～ 75	60 ～ 120	50 ～ 140	50 ～ 110	60 ～ 140	130 ～ 180	150 ～ 220	50 ～ 120	50 ～ 105	50 ～ 105	75 ～ 180	75 ～ 180	100 ～ 250	50 ～ 140	55 ～ 130
work material	general steel[○/◎] / Quenched and tempered steel[○] / Stainless Steel[○/◎] / Cast Iron[○/◎] / Aluminum[○] / Titanium[○/◎] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / Stainless Steel[◎] / Cast Iron[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Titanium[◎]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○]	-	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / Aluminum[◎] / Copper[○]	-	-	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○]	-	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Graphite[○]	-	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Aluminum[○] / Copper[○]	Aluminum[◎] / Copper[○] / Resin[○]	Aluminum[◎] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	Resin[◎]	-	general steel[○/◎] / Quenched and tempered steel[○/◎] / Stainless Steel[○/◎] / Cast Iron[○/◎] / Aluminum[○] / Titanium[○/◎] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○]	Aluminum[◎] / Copper[○]	Aluminum[◎] / Copper[◎]	Aluminum[◎]	Aluminum[◎]	Aluminum[◎]	Aluminum[◎]	general steel[◎] / Quenched and tempered steel[◎] / Cast Iron[◎]
Torsion Angle (θ)	Variable lead	-	Standard torsion (30-40°)	-	Powerful Torsion (45°-60°)	-	Standard torsion (30-40°)	Weak torsion (15 to 25˚)	Standard torsion (30-40°)	-	-	Standard torsion (30-40°)	-	Variable lead	-	Weak torsion (15 to 25˚)	Weak torsion (15 to 25˚)	Weak torsion (15 to 25˚)	Weak torsion (15 to 25˚)	Weak torsion (15 to 25˚)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	No torsion	Standard torsion (30-40°)	Standard torsion (30-40°) / Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Weak torsion (15 to 25˚)	Weak torsion (15 to 25˚)	Weak torsion (15 to 25˚)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Weak torsion (15 to 25˚)
Machining Application	Plane / Side / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Side / Groove	Plane / Side / Groove / Inclined Cuts	Plane / Side / Inclined Cuts	-	Side / Groove	Plane / Side / Groove	Plane / Side / Groove / Inclined Cuts	-	-	Side / Groove / Plunging (Z feed) / Inclined Cuts	-	Side / Groove	-	Plane / Side / Groove / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Side / Groove	Side / Groove	Plane / Side / Groove	Plane / Side / Groove	Plane / Side / Groove	Side	Side	Side	Side / Groove	Side / Groove
Coating	-	-	TiN	TiAlN	FX	-	TiAlN	TiAlN	-	-	-	-	-	For General Steels (AlCrN, etc.)	Dia Coat	TiAlN	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	DLC	Non-Coated	TiAlN	TiAlN	For General Steels (AlCrN, etc.)	Dia Coat	Dia Coat	TiAlN	TiAlN	TiAlN	TiAlN	Non-Coated	Non-Coated	TiAlN	Non-Coated	DLC	Non-Coated	Non-Coated	Non-Coated	Non-Coated	TiAlN
Blade tip shape	C plane	-	With Lead	-	-	-	-	-	-	-	-	-	-	C plane	-	C plane	Micro R	Micro R	Micro R	Micro R	C plane	C plane	C plane	C plane	Micro R	Micro R	With Lead	With Lead	With Lead	With Lead	With Lead	C plane	C plane	C plane	C plane	C plane	C plane	C plane	C plane	C plane	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	-
Type	Roughing	Roughing	Square	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Long-Neck Square	Roughing	Roughing	Roughing	Roughing	Square	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing

Loading...Tải…