Radius End Mills (Carbide)（Page2）

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute / no side blade

  MISUMI

  [Features]·High rigidity is achieved by adopting negative radius and short blade length without helix angle and chattering is suppressed even at pocket corners·Since it has back taper, it is possible to perform machining without peripheral edge hitting side when machining corners·Even for bottom surface processing, single machine can handle from middle finish to final finish, realizing reduction in process time

  • Volume Discount

  • TS
  • High-Hardness Steel
  • 4 Flutes

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 12	0.75 ～ 3	1.2 ～ 5	4	60 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	6 ～ 12	7.5 ～ 24	Plane / Side / Curved surface / Inclined Cuts	For High Hardness (Silicon Group)	High-Feed Radius	No torsion	±0.02

  From: 1,321,408 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / stub model

  MISUMI

  [Features]·High rigid and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter, and 45° helix angle, enabling high-efficiency machining with high feed·By adopting stub flute length that has same flute length as cutting diameter, it is possible to process bottom surface while suppressing chattering·Versatile type that can be used for engraving, side surfaces, coarse, and middle finish·Can be r...Readmore

  • Volume Discount

  • TS
  • High-Hardness Steel
  • 4 Flutes
  • B (Stub)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  2 ～ 12	0.5 ～ 2	2 ～ 12	4	50 ～ 100	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	4 ～ 12	-	Plane / Side / Curved surface / Inclined Cuts	For High Hardness (Silicon Group)	High-Feed Radius	Powerful Torsion (45°-60°)	±0.015

  From: 1,171,064 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / short model

  MISUMI

  [Features]·High rigidity and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter, and 45° helix angle, enabling high-efficiency machining with high feed·Versatile type that can be used for engraving, side surfaces, coarse, and middle finish·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • High-Hardness Steel
  • 4 Flutes
  • S (Short)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  2 ～ 20	0.5 ～ 3	4 ～ 40	4	50 ～ 130	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	4 ～ 20	-	Plane / Side / Curved surface / Inclined Cuts	For High Hardness (Silicon Group)	High-Feed Radius	Powerful Torsion (45°-60°)	±0.015

  From: 1,588,109 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, 4-flute, 45° spiral / short, long neck model

  MISUMI

  Long neck type with interference prevention can be selected from a number of effective lengths

  • Volume Discount

  • TS
  • High-Hardness Steel
  • 4 Flutes
  • S (Short)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  4 ～ 16	1 ～ 3	6 ～ 24	4	70 ～ 180	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	4 ～ 16	28 ～ 120	Plane / Side / Curved surface / Inclined Cuts	For High Hardness (Silicon Group)	Long-Neck Radius	Powerful Torsion (45°-60°)	±0.015

  From: 1,873,993 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill (for shrinkage fitting), 3-flute, 45° spiral / stub model

  MISUMI

  [Features]·Designed with optimum blade length, shank length and overall length considering processing using shrink fit holder·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 3 Flutes
  • B (Stub)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 12	0.3 ～ 1	4.5 ～ 18	3	40 ～ 65	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	6 ～ 12	-	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	For High Hardness (Silicon Group)	radius	Powerful Torsion (45°-60°)	±0.01

  From: 1,564,545 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill (for shrinkage fitting), 4-flute, 45° spiral / stub model

  MISUMI

  [Features]·Designed with optimum blade length, shank length and overall length considering processing using shrink fit holder·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 4 Flutes
  • B (Stub)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 12	0.3 ～ 1	4.5 ～ 18	4	40 ～ 65	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	6 ～ 12	-	Plane / Side / Curved surface / Inclined Cuts	For High Hardness (Silicon Group)	radius	Powerful Torsion (45°-60°)	±0.01

  From: 1,497,010 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, 3-flute, 45° spiral / stub model

  MISUMI

  [Features]·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 3 Flutes
  • B (Stub)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 12	0.5 ～ 1	4.5 ～ 18	3	60 ～ 100	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	6 ～ 12	14 ～ 68	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	For High Hardness (Silicon Group)	radius	Powerful Torsion (45°-60°)	±0.01

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Radius End Mill, 3-Flute / 45° Spiral / Short Type

  MISUMI

  [Features]·By adopting 3-flute shape, it is resistant to chattering, and can perform from plunging to grooving without steps·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 3 Flutes
  • S (Short)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 12	0.3 ～ 2	5 ～ 26	3	60 ～ 100	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	6 ～ 12	18 ～ 70	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	For High Hardness (Silicon Group)	radius	Powerful Torsion (45°-60°)	±0.01

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, 3-flute, 45° spiral / regular model

  MISUMI

  [Features]·Radius type of multi-function end mill·By adopting 3-flute shape, it is resistant to chattering, and can perform from plunging to grooving without steps·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast·Radius cutting edge is also effective in suppressing chipping

  • Volume Discount

  • TS
  • General Steel
  • 3 Flutes
  • R (Regular)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 20	0.2 ～ 2	5 ～ 56	3	60 ～ 130	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	6 ～ 20	26 ～ 92	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	For High Hardness (Silicon Group)	radius	Powerful Torsion (45°-60°)	±0.01

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, 4-flute, 45° spiral / long shank, short model

  MISUMI

  [Features]·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes·Because of its high chip removal capability performance, it is possible to process at feed rate that is more than double compared to that of standard end mill·Long shank type ideal for deep cavity milling·For ø7 and above, shank diameter is thinner than cutting diameter to prevent interference·Can be regrinded. Please refer to the pag...Readmore

  • Volume Discount

  • TS
  • General Steel
  • 4 Flutes
  • S (Short)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 22	0.2 ～ 2	4.5 ～ 30	4	80 ～ 200	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	6 ～ 20	10 ～ 18	Plane / Side / Curved surface / Inclined Cuts	For High Hardness (Silicon Group)	radius	Powerful Torsion (45°-60°)	±0.01

  From: 2,204,293 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, 4-flute, 45° spiral / stub model

  MISUMI

  [Features]·Radius type of multi-function end mill·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast·Radius cutting edge is also effective in suppressing chipping·By adopting stub blade length that is 1.5 times longer than cutting diameter, it is possible to process bottom surface w...Readmore

  • Volume Discount

  • TS
  • General Steel
  • 4 Flutes
  • B (Stub)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 12	0.5 ～ 1	4.5 ～ 18	4	60 ～ 100	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	6 ～ 12	14 ～ 68	Plane / Side / Curved surface / Inclined Cuts	For High Hardness (Silicon Group)	radius	Powerful Torsion (45°-60°)	±0.01

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, 4-flute, 45° spiral / short model

  MISUMI

  [Features]·Multi-function end mill radius type.·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast·Radius cutting edge is also effective in suppressing chipping·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 4 Flutes
  • S (Short)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 20	0.2 ～ 3	5 ～ 38	4	60 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	6 ～ 20	18 ～ 73	Plane / Side / Curved surface / Inclined Cuts	For High Hardness (Silicon Group)	radius	Powerful Torsion (45°-60°)	±0.01

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, 2-flute stub model

  MISUMI

  [Features]·Rigidity-oriented type designed with optimum blade length, shank length and overall length in consideration of processing using shrink fit holder·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes
  • B (Stub)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  2 ～ 12	0.2 ～ 3	3 ～ 18	2	35 ～ 60	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	4 ～ 12	-	Plane / Side / Curved surface / Groove / Inclined Cuts	For High Hardness (Silicon Group)	radius	Standard torsion (30-40°)	±0.01

  From: 931,471 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, 2-flute / 1.5D Flute Length (stub) model

  MISUMI

  [Features]·Short flute length type with cutting edge radius attached to general purpose 2-flute end mill·Radius cutting edge is also effective in suppressing chipping·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes
  • B (Stub)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 12	0.1 ～ 3	1.5 ～ 18	2	40 ～ 75	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	4 ～ 12	14 ～ 45	Plane / Side / Curved surface / Groove / Inclined Cuts	For High Hardness (Silicon Group)	radius	Standard torsion (30-40°)	±0.01 ～ ±0.02

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, 2-flute / short model

  MISUMI

  [Features]·Short flute length type with cutting edge radius attached to general purpose 2-flute end mill·Radius cutting edge is also effective in suppressing chipping·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes
  • S (Short)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 20	0.1 ～ 3	2 ～ 40	2	40 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	4 ～ 20	17 ～ 45	Plane / Side / Curved surface / Groove / Inclined Cuts	For High Hardness (Silicon Group)	radius	Standard torsion (30-40°)	±0.01 ～ ±0.02

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, 2-flute / regular model

  MISUMI

  [Features]·General purpose 2-flute end mill with regular flute length type with cutting edge radius·Radius cutting edge is also effective in suppressing chipping·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes
  • R (Regular)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 20	0.1 ～ 3	3 ～ 60	2	45 ～ 125	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	4 ～ 20	23 ～ 55	Plane / Side / Curved surface / Groove / Inclined Cuts	For High Hardness (Silicon Group)	radius	Standard torsion (30-40°)	±0.01 ～ ±0.02

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Radius End Mill for Shrink Fit Holder/4-Flute/Stub Type

  MISUMI

  [Features]·Designed with optimum blade length, shank length and overall length considering processing using shrink fit holder·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 4 Flutes
  • B (Stub)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  2 ～ 12	0.3 ～ 1	3 ～ 18	4	35 ～ 60	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	4 ～ 12	-	Plane / Side / Curved surface / Inclined Cuts	For High Hardness (Silicon Group)	radius	Standard torsion (30-40°)	±0.02

  From: 1,131,235 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Radius End Mill 4-Flute / Stub Type

  MISUMI

  [Features]·Short flute length type with cutting edge radius attached to general purpose 4-flute end mill·Radius cutting edge is also effective in suppressing chipping·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 4 Flutes
  • B (Stub)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 12	0.1 ～ 3	1.5 ～ 18	4	40 ～ 75	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	4 ～ 12	14 ～ 45	Plane / Side / Curved surface / Inclined Cuts	For High Hardness (Silicon Group)	radius	Standard torsion (30-40°)	±0.01 ～ ±0.02

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, 4-flute / short model

  MISUMI

  [Features]·Short flute length type with cutting edge radius attached to general purpose 4-flute end mill·Radius cutting edge is also effective in suppressing chipping·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 4 Flutes
  • S (Short)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 12	0.1 ～ 3	2 ～ 24	4	40 ～ 75	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	4 ～ 12	17 ～ 45	Plane / Side / Curved surface / Inclined Cuts	For High Hardness (Silicon Group)	radius	Standard torsion (30-40°)	±0.01 ～ ±0.02

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, 4-flute / regular model

  MISUMI

  [Features]·Regular flute length type with cutting edge radius attached to general-purpose 4-flute end mill·Radius cutting edge is also effective in suppressing chipping·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 4 Flutes
  • R (Regular)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 12	0.1 ～ 3	3 ～ 36	4	45 ～ 85	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	4 ～ 12	23 ～ 55	Plane / Side / Curved surface / Inclined Cuts	For High Hardness (Silicon Group)	radius	Standard torsion (30-40°)	±0.01 ～ ±0.02

  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, 3-flute, 45° spiral, stub / tapered neck model

  MISUMI

  By the adoption of 3-blade shape and tapered neck, chattering is suppressed in deep engraving

  • Volume Discount

  • TS
  • High-Hardness Steel
  • 3 Flutes
  • B (Stub)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 12	0.8 ～ 2	4.5 ～ 18	3	80 ～ 160	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	6 ～ 16	24 ～ 105	Plane / Side / Curved surface / Groove / Inclined Cuts	For High Hardness (Silicon Group)	Tapered neck radius	Powerful Torsion (45°-60°)	±0.02

  From: 1,765,979 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, 4-flute, 45° spiral, stub / tapered neck model

  MISUMI

  [Features]·High rigid and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter, and 45° helix angle, enabling high-efficiency machining with high feed·Taper neck is effective in suppressing chattering·Versatile type that can be used for engraving, side surfaces, coarse, and middle finish·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, rang...Readmore

  • Volume Discount

  • TS
  • High-Hardness Steel
  • 4 Flutes
  • B (Stub)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 12	0.8 ～ 2	4.5 ～ 18	4	80 ～ 160	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	6 ～ 16	24 ～ 105	Plane / Side / Curved surface / Inclined Cuts	For High Hardness (Silicon Group)	Tapered neck radius	Powerful Torsion (45°-60°)	±0.02

  From: 2,311,265 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Radius End Mill (for Shrinkage Fitting / Radius (R) Accuracy ±5 UM), for High-Hardness Steel Machining, 4-Flute, 45° Spiral / Stub Model

  MISUMI

  The high precision radius end mill for shrink fit holder achieves the high accuracy and high efficiency machining

  • Volume Discount

  • TS
  • High-Hardness Steel
  • 4 Flutes
  • B (Stub)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  2 ～ 6	0.2 ～ 0.5	3 ～ 9	4	50	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	6	-	Plane / Side / Curved surface / Inclined Cuts	For High Hardness (Silicon Group)	High-Feed Radius	Powerful Torsion (45°-60°)	±0.005

  From: 2,200,749 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Radius End Mill for High-Hardness Copper Machining, Multi-Blade, Spiral / Stub Model

  MISUMI

  [Features]·High helix angle end mill with radius for machining high hardness steel·High tool rigidity minimizes tool tilt during side milling·Machining of high hardness steel up to 65HRC is possible·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • High-Hardness Steel
  • Multi-Flutes （5 ~）
  • B (Stub)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 12	0.5 ～ 2	5 ～ 12	6	60 ～ 85	general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]	6 ～ 12	11 ～ 55	Plane / Side / Curved surface	For High Hardness (Silicon Group)	radius	Powerful Torsion (45°-60°)	±0.02

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Radius End Mill for Stainless Steel Machining, 3-Flute / 45° Spiral / Short Type

  MISUMI

  The popular radius type for stainless steel processing is also effective in preventing chipping

  • Volume Discount

  • TS
  • SUS
  • 3 Flutes
  • S (Short)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 12	0.5 ～ 2	7 ～ 18	3	60 ～ 100	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Aluminum[○] / Copper[○]	6 ～ 12	-	Plane / Side / Curved surface / Groove / Inclined Cuts	For High Hardness (Silicon Group)	radius	Powerful Torsion (45°-60°)	±0.02

  From: 2,257,675 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  DLC Coated Carbide Radius End Mill for Aluminum Machining, 2-Flute / Regular Model

  MISUMI

  In addition to the standard products, the radius can be selected extensively for manufactured products

  • Volume Discount

  • DLC
  • Aluminum
  • 2 Flutes
  • R (Regular)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  2 ～ 12	0.2 ～ 1	5 ～ 36	2	40 ～ 80	Aluminum[◎] / Copper[○] / Resin[○]	4 ～ 12	23 ～ 50	Plane / Side / Curved surface / Groove / Inclined Cuts	DLC	radius	Powerful Torsion (45°-60°)	±0.01 ～ ±0.02

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Radius End Mill for Aluminum Machining, 2-Flute / Regular Model

  MISUMI

  Non-coated manufactured products can be shipped on the 5th day in addition to the stocked products

  • Volume Discount

  • Non-Coated
  • Aluminum
  • 2 Flutes
  • R (Regular)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  2 ～ 12	0.2 ～ 1	5 ～ 36	2	40 ～ 80	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	4 ～ 12	23 ～ 50	Plane / Side / Curved surface / Groove / Inclined Cuts	Non-Coated	radius	Powerful Torsion (45°-60°)	±0.01 ～ ±0.02

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Radius End Mill for Aluminum Machining, 3-Flute / Stub, Long Shank Model

  MISUMI

  Comes with the rounded edge that suppresses machining streaks in standing-wall multi-stage machining

  • Volume Discount

  • Non-Coated
  • Aluminum
  • 3 Flutes

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  5 ～ 22	0.5 ～ 2	9 ～ 33	3	80 ～ 200	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	4 ～ 20	-	Plane / Side / Curved surface / Groove / Inclined Cuts	Non-Coated	radius	Powerful Torsion (45°-60°)	±0.02

  From: 1,801,712 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Diamond Coated Carbide Radius End Mill for Graphite Machining, 4-Flute / Long Model

  MISUMI

  The diamond coated radius shape that's ideal for shaping graphite

  • Volume Discount

  • DIA
  • Graphite
  • 4 Flutes
  • Long

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 12	0.5 ～ 3	30 ～ 60	4	150 ～ 200	Aluminum[◎] / Copper[○] / Graphite[◎] / Resin[○]	6 ～ 12	60 ～ 85	Plane / Side / Curved surface / Inclined Cuts	Dia Coat	radius	Standard torsion (30-40°)	±0.02

  From: 5,060,690 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Radius End Mill for Resin Machining, 2-Flute / Regular Model

  MISUMI

  Small radius type that prevents cutter marks on resin

  • Volume Discount

  • Non-Coated
  • Resin
  • 2 Flutes
  • R (Regular)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 10	0.2	3 ～ 30	2	50 ～ 80	Aluminum[○] / Copper[○] / Graphite[○] / Resin[◎]	3 ～ 10	-	Plane / Side / Curved surface / Groove / Inclined Cuts	Non-Coated	radius	Standard torsion (30-40°)	±0.02

  From: 964,625 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Coated Carbide Radius End Mill, 3-Flute, 45° Spiral / Short, Long Neck Model

  MISUMI

  [Features]·High rigid and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter and 45° helix angle, enabling high-efficiency machining with high feed·Long neck type is ideal for deep cavity milling of deep pockets, etc.·Versatile type that can be used for engraving, side surfaces, R, coarse, and middle finish·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage...Readmore

  • Volume Discount

  • TS
  • High-Hardness Steel
  • 3 Flutes

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  4 ～ 12	1 ～ 2	8 ～ 24	3	70 ～ 140	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	4 ～ 12	28 ～ 90	Plane / Side / Curved surface / Groove / Inclined Cuts	For High Hardness (Silicon Group)	Long-Neck Radius	Powerful Torsion (45°-60°)	±0.015

  From: 1,847,095 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Non-Coated TS Coated Carbide 0.1 mm Unit Radius Designated End Mill

  MISUMI

  [Features]·Alteration end mill that can specify radius size of carbide end mill in 0.1 mm increments·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Non-Coated
  • General Steel

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  2 ～ 20	0.1 ～ 3	4 ～ 60	2 ～ 4	40 ～ 125	general steel[◎] / Quenched and tempered steel[○/◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	4 ～ 20	-	Plane / Side / Curved surface / Groove / Inclined Cuts	For High Hardness (Silicon Group) / Non-Coated	radius	Standard torsion (30-40°)	±0.02

  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  XCP Coated Carbide Radius End Mill For Tempered Steel / High Hardness Steel Machining / 4-Flute / Blade Length 2.5D Type / Regular Type

  MISUMI

  · A highly versatile series that's ideal for machining work materials from tempered steel (up to 45 HRC) to high hardness steel (up to 65 HRC).· Coating with excellent hardness and heat resistance makes it suitable for high speed machining.· 45° radius end mill capable of high-speed and high-efficiency machining

  • Volume Discount

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 12	0.2 ～ 1	7.5 ～ 38	4	45 ～ 100	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]	3 ～ 12	-	Plane / Side / Curved surface / Groove / Inclined Cuts	For High Hardness (Silicon Group)	radius	Powerful Torsion (45°-60°)	±20

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  XCP Coated Carbide Radius End Mill For Tempered Steel / High Hardness Steel Machining / 4-Flute / Regular Type

  MISUMI

  · A highly versatile series that's ideal for machining work materials from tempered steel (up to 45 HRC) to high hardness steel (up to 65 HRC).· Coating with excellent hardness and heat resistance makes it suitable for high speed machining.· 4-flute radius end mill that achieves high feed/high speed machining

  • Volume Discount

  • High-Hardness Steel
  • 4 Flutes
  • SR

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 10	0.2 ～ 1.5	7.5 ～ 30	4	45 ～ 80	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]	3 ～ 10	-	Plane / Side / Curved surface / Groove / Inclined Cuts	For High Hardness (Silicon Group)	radius	Standard torsion (30-40°)	±10

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XCP Coated Carbide Radius End Mill / For Tempered Steel / High Hardness Steel Machining / 3-Flute / 45° Torsion / Blade Length 2.5D Type

  MISUMI

  · A highly versatile series that's ideal for machining work materials from tempered steel (up to 45 HRC) to high hardness steel (up to 65 HRC).· Coating with excellent hardness and heat resistance makes it suitable for high speed machining.· A tool with short blade length that suppresses chatter during machining

  • Volume Discount

  • High-Hardness Steel
  • 3 Flutes
  • SR

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  4 ～ 10	0.3 ～ 1	10 ～ 25	3	50 ～ 80	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]	4 ～ 10	-	Plane / Side / Curved surface / Groove / Inclined Cuts	For High Hardness (Silicon Group)	radius	Powerful Torsion (45°-60°)	±10

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Uneven Lead 4-Flute Radius End Mill

  MISUMI

  Introducing the long-awaited unequal lead 4-flute radius end mill in the TSC series (helix angle of 40° / 43°)

  • Volume Discount

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  2 ～ 25	0.2 ～ 6.5	4 ～ 50	4	50 ～ 120	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	6 ～ 25	-	Plane / Side / Curved surface / Groove	For High Hardness (Silicon Group)	radius	Other	±0.02

  From: 1,010,709 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  VAC Series Carbide 2-Flute Radius End Mill

  MISUMI

  [Features]·Cutting edge radius also reinforced cutting edge rigid·Ultra-fine particle cemented carbide base material and coating with excellent adhesion and heat resistance are adopted·Can process heat-treated steel up to 50HRC·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 12	0.1 ～ 3	2.5 ～ 30	2	50 ～ 130	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	6 ～ 12	-	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	-	radius	-	-

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  VAC Series Carbide 4-Flute Uneven Lead Radius End Mill

  MISUMI

  [Features]·Suppresses chattering with unequal lead and unequal flutes·Stable machining is possible while maintaining finished surface accuracy·Cutting edge radius also reinforced cutting edge rigid·Can process heat-treated steel up to 50HRC·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1.5 ～ 12	0.2 ～ 3	4 ～ 30	4	50 ～ 150	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	6 ～ 12	-	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	-	radius	-	-

  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  DLC Mill, Radius 2DLCM-R

  NACHI(FUJIKOSHI)

  End mill for aluminum and copper alloys. Capable of rounding corners of grooves.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  2 ～ 20	0.2 ～ 3	6 ～ 38	2	40 ～ 100	Aluminum[◎] / Copper[○]	4 ～ 20	-	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	DLC	radius	Standard torsion (30-40°)	-0.032～-0.059 ～ -0.014～-0.028

  From: 1,390,610 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  GSX, Radius, 2.5D, GSXVL4T-R-2.5D

  NACHI(FUJIKOSHI)

  [Notice] The use of unequal spacing and unequal leads, and a sharp cutting edge shape suppress chattering and are suitable for heat resistant alloys.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 20	0.3 ～ 3	15 ～ 50	4	50 ～ 100	Stainless Steel[◎] / Titanium[◎]	6 ～ 20	-	Plane / Side / Curved surface	For General Steels (AlCrN, etc.)	radius	Powerful Torsion (45°-60°)	0～-0.030

  From: 2,279,635 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  X's Mill Geo Radius 4GEOLS-R

  NACHI(FUJIKOSHI)

  Ideal for deep corner rounding of molds and machine parts. High precision machining is possible even for deep engraving.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 20	0.2 ～ 2	4.5 ～ 30	4	60 ～ 200	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	6 ～ 20	12 ～ -	Plane / Side / Curved surface	TiAlN	radius	Standard torsion (30-40°)	-0.032～-0.059 ～ -0.014～-0.028

  From: 2,325,028 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  GS MILL radius GS4-R

  NACHI(FUJIKOSHI)

  Ideal for corner rounding and high-speed contour machining of molds and machine parts.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 12	0.2 ～ 2	7.5 ～ 26	4	45 ～ 75	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	6 ～ 12	-	Plane / Side / Curved surface	TiAlN	radius	Standard torsion (30-40°)	0～-0.030 ～ 0～-0.015

  From: 1,438,216 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  X's Mill Geo Radius 4XSGEO-R

  NACHI(FUJIKOSHI)

  Ideal for corner rounding and contour machining of molds and machine parts.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 20	0.2 ～ 3	8 ～ 38	4	50 ～ 125	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	6 ～ 20	-	Plane / Side / Curved surface	TiAlN	radius	Standard torsion (30-40°)	-0.032～-0.059 ～ -0.014～-0.028

  From: 1,963,261 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  GX3000 Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Corner Radius

  OSG

  Carbide mushroom-shaped end mill with rounded corners developed for shrink-fit types.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  12 ～ 16	0.5	12 ～ 16	2	34 ～ 49	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Copper[○]	6 ～ 10	-	Plane / Side / Curved surface / Groove / Plunging (Z feed)	For General Steels (AlCrN, etc.)	radius	No torsion	-

  From: 1,870,409 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CBN End Mills 2 Flutes Short with Corner Radius

  OSG

  2-Flute Short Corner Radius CBN-CR-EDS·Demonstrates high performance in machining high-rigid materials

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 6	0.2 ～ 2	3 ～ 6	2	45 ～ 50	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Cast Iron[○]	6	-	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Non-Coated	radius	No torsion	-

  From: 6,857,447 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
SpecificationsĐặc điểm kĩ thuật
Blade diameter (D)(φ)
R Size(mm)
Blade length (ℓ)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
Shank diameter (d)(mm)
Underneck length (ℓ1)(mm)
Machining Application
Coating
Type
Torsion Angle (θ)
R Precision(μm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	OSG	OSG
Product SeriesDòng sản phẩm	TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute / no side blade	TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / stub model	TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / short model	TSC series carbide radius end mill, 4-flute, 45° spiral / short, long neck model	TSC series carbide radius end mill (for shrinkage fitting), 3-flute, 45° spiral / stub model	TSC series carbide radius end mill (for shrinkage fitting), 4-flute, 45° spiral / stub model	TSC series carbide radius end mill, 3-flute, 45° spiral / stub model	TSC Series Carbide Radius End Mill, 3-Flute / 45° Spiral / Short Type	TSC series carbide radius end mill, 3-flute, 45° spiral / regular model	TSC series carbide radius end mill, 4-flute, 45° spiral / long shank, short model	TSC series carbide radius end mill, 4-flute, 45° spiral / stub model	TSC series carbide radius end mill, 4-flute, 45° spiral / short model	TSC series carbide radius end mill, 2-flute stub model	TSC series carbide radius end mill, 2-flute / 1.5D Flute Length (stub) model	TSC series carbide radius end mill, 2-flute / short model	TSC series carbide radius end mill, 2-flute / regular model	TSC Series Carbide Radius End Mill for Shrink Fit Holder/4-Flute/Stub Type	TSC Series Carbide Radius End Mill 4-Flute / Stub Type	TSC series carbide radius end mill, 4-flute / short model	TSC series carbide radius end mill, 4-flute / regular model	TSC series carbide radius end mill, 3-flute, 45° spiral, stub / tapered neck model	TSC series carbide radius end mill, 4-flute, 45° spiral, stub / tapered neck model	TSC Series Carbide Radius End Mill (for Shrinkage Fitting / Radius (R) Accuracy ±5 UM), for High-Hardness Steel Machining, 4-Flute, 45° Spiral / Stub Model	TSC Series Carbide Radius End Mill for High-Hardness Copper Machining, Multi-Blade, Spiral / Stub Model	TSC Series Carbide Radius End Mill for Stainless Steel Machining, 3-Flute / 45° Spiral / Short Type	DLC Coated Carbide Radius End Mill for Aluminum Machining, 2-Flute / Regular Model	Carbide Radius End Mill for Aluminum Machining, 2-Flute / Regular Model	Carbide Radius End Mill for Aluminum Machining, 3-Flute / Stub, Long Shank Model	Diamond Coated Carbide Radius End Mill for Graphite Machining, 4-Flute / Long Model	Carbide Radius End Mill for Resin Machining, 2-Flute / Regular Model	TSC Series Coated Carbide Radius End Mill, 3-Flute, 45° Spiral / Short, Long Neck Model	Non-Coated TS Coated Carbide 0.1 mm Unit Radius Designated End Mill	XCP Coated Carbide Radius End Mill For Tempered Steel / High Hardness Steel Machining / 4-Flute / Blade Length 2.5D Type / Regular Type	XCP Coated Carbide Radius End Mill For Tempered Steel / High Hardness Steel Machining / 4-Flute / Regular Type	XCP Coated Carbide Radius End Mill / For Tempered Steel / High Hardness Steel Machining / 3-Flute / 45° Torsion / Blade Length 2.5D Type	TSC Series Carbide Uneven Lead 4-Flute Radius End Mill	VAC Series Carbide 2-Flute Radius End Mill	VAC Series Carbide 4-Flute Uneven Lead Radius End Mill	DLC Mill, Radius 2DLCM-R	GSX, Radius, 2.5D, GSXVL4T-R-2.5D	X's Mill Geo Radius 4GEOLS-R	GS MILL radius GS4-R	X's Mill Geo Radius 4XSGEO-R	GX3000 Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Corner Radius	CBN End Mills 2 Flutes Short with Corner Radius
From	1,321,408 VND	1,171,064 VND	1,588,109 VND	1,873,993 VND	1,564,545 VND	1,497,010 VND				2,204,293 VND			931,471 VND				1,131,235 VND				1,765,979 VND	2,311,265 VND	2,200,749 VND		2,257,675 VND			1,801,712 VND	5,060,690 VND	964,625 VND	1,847,095 VND					1,010,709 VND			1,390,610 VND	2,279,635 VND	2,325,028 VND	1,438,216 VND	1,963,261 VND	1,870,409 VND	6,857,447 VND
Days to ShipSố ngày giao hàng	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	Same day or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	6 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	4 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more
SpecificationsĐặc điểm kĩ thuật	TS High-Hardness Steel 4 Flutes	TS High-Hardness Steel 4 Flutes B (Stub)	TS High-Hardness Steel 4 Flutes S (Short)	TS High-Hardness Steel 4 Flutes S (Short)	TS General Steel 3 Flutes B (Stub)	TS General Steel 4 Flutes B (Stub)	TS General Steel 3 Flutes B (Stub)	TS General Steel 3 Flutes S (Short)	TS General Steel 3 Flutes R (Regular)	TS General Steel 4 Flutes S (Short)	TS General Steel 4 Flutes B (Stub)	TS General Steel 4 Flutes S (Short)	TS General Steel 2 Flutes B (Stub)	TS General Steel 2 Flutes B (Stub)	TS General Steel 2 Flutes S (Short)	TS General Steel 2 Flutes R (Regular)	TS General Steel 4 Flutes B (Stub)	TS General Steel 4 Flutes B (Stub)	TS General Steel 4 Flutes S (Short)	TS General Steel 4 Flutes R (Regular)	TS High-Hardness Steel 3 Flutes B (Stub)	TS High-Hardness Steel 4 Flutes B (Stub)	TS High-Hardness Steel 4 Flutes B (Stub)	TS High-Hardness Steel Multi-Flutes （5 ~） B (Stub)	TS SUS 3 Flutes S (Short)	DLC Aluminum 2 Flutes R (Regular)	Non-Coated Aluminum 2 Flutes R (Regular)	Non-Coated Aluminum 3 Flutes	DIA Graphite 4 Flutes Long	Non-Coated Resin 2 Flutes R (Regular)	TS High-Hardness Steel 3 Flutes	Non-Coated General Steel		High-Hardness Steel 4 Flutes SR	High-Hardness Steel 3 Flutes SR
Blade diameter (D)(φ)	3 ～ 12	2 ～ 12	2 ～ 20	4 ～ 16	3 ～ 12	3 ～ 12	3 ～ 12	3 ～ 12	3 ～ 20	3 ～ 22	3 ～ 12	3 ～ 20	2 ～ 12	1 ～ 12	1 ～ 20	1 ～ 20	2 ～ 12	1 ～ 12	1 ～ 12	1 ～ 12	3 ～ 12	3 ～ 12	2 ～ 6	6 ～ 12	3 ～ 12	2 ～ 12	2 ～ 12	5 ～ 22	6 ～ 12	1 ～ 10	4 ～ 12	2 ～ 20	3 ～ 12	3 ～ 10	4 ～ 10	2 ～ 25	1 ～ 12	1.5 ～ 12	2 ～ 20	6 ～ 20	3 ～ 20	3 ～ 12	3 ～ 20	12 ～ 16	3 ～ 6
R Size(mm)	0.75 ～ 3	0.5 ～ 2	0.5 ～ 3	1 ～ 3	0.3 ～ 1	0.3 ～ 1	0.5 ～ 1	0.3 ～ 2	0.2 ～ 2	0.2 ～ 2	0.5 ～ 1	0.2 ～ 3	0.2 ～ 3	0.1 ～ 3	0.1 ～ 3	0.1 ～ 3	0.3 ～ 1	0.1 ～ 3	0.1 ～ 3	0.1 ～ 3	0.8 ～ 2	0.8 ～ 2	0.2 ～ 0.5	0.5 ～ 2	0.5 ～ 2	0.2 ～ 1	0.2 ～ 1	0.5 ～ 2	0.5 ～ 3	0.2	1 ～ 2	0.1 ～ 3	0.2 ～ 1	0.2 ～ 1.5	0.3 ～ 1	0.2 ～ 6.5	0.1 ～ 3	0.2 ～ 3	0.2 ～ 3	0.3 ～ 3	0.2 ～ 2	0.2 ～ 2	0.2 ～ 3	0.5	0.2 ～ 2
Blade length (ℓ)(mm)	1.2 ～ 5	2 ～ 12	4 ～ 40	6 ～ 24	4.5 ～ 18	4.5 ～ 18	4.5 ～ 18	5 ～ 26	5 ～ 56	4.5 ～ 30	4.5 ～ 18	5 ～ 38	3 ～ 18	1.5 ～ 18	2 ～ 40	3 ～ 60	3 ～ 18	1.5 ～ 18	2 ～ 24	3 ～ 36	4.5 ～ 18	4.5 ～ 18	3 ～ 9	5 ～ 12	7 ～ 18	5 ～ 36	5 ～ 36	9 ～ 33	30 ～ 60	3 ～ 30	8 ～ 24	4 ～ 60	7.5 ～ 38	7.5 ～ 30	10 ～ 25	4 ～ 50	2.5 ～ 30	4 ～ 30	6 ～ 38	15 ～ 50	4.5 ～ 30	7.5 ～ 26	8 ～ 38	12 ～ 16	3 ～ 6
Number of flutes(sheet)	4	4	4	4	3	4	3	3	3	4	4	4	2	2	2	2	4	4	4	4	3	4	4	6	3	2	2	3	4	2	3	2 ～ 4	4	4	3	4	2	4	2	4	4	4	4	2	2
Overall Length (L)(mm)	60 ～ 110	50 ～ 100	50 ～ 130	70 ～ 180	40 ～ 65	40 ～ 65	60 ～ 100	60 ～ 100	60 ～ 130	80 ～ 200	60 ～ 100	60 ～ 110	35 ～ 60	40 ～ 75	40 ～ 110	45 ～ 125	35 ～ 60	40 ～ 75	40 ～ 75	45 ～ 85	80 ～ 160	80 ～ 160	50	60 ～ 85	60 ～ 100	40 ～ 80	40 ～ 80	80 ～ 200	150 ～ 200	50 ～ 80	70 ～ 140	40 ～ 125	45 ～ 100	45 ～ 80	50 ～ 80	50 ～ 120	50 ～ 130	50 ～ 150	40 ～ 100	50 ～ 100	60 ～ 200	45 ～ 75	50 ～ 125	34 ～ 49	45 ～ 50
work material	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Aluminum[○] / Copper[○]	Aluminum[◎] / Copper[○] / Resin[○]	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	Aluminum[◎] / Copper[○] / Graphite[◎] / Resin[○]	Aluminum[○] / Copper[○] / Graphite[○] / Resin[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[○/◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	Aluminum[◎] / Copper[○]	Stainless Steel[◎] / Titanium[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Cast Iron[○]
Shank diameter (d)(mm)	6 ～ 12	4 ～ 12	4 ～ 20	4 ～ 16	6 ～ 12	6 ～ 12	6 ～ 12	6 ～ 12	6 ～ 20	6 ～ 20	6 ～ 12	6 ～ 20	4 ～ 12	4 ～ 12	4 ～ 20	4 ～ 20	4 ～ 12	4 ～ 12	4 ～ 12	4 ～ 12	6 ～ 16	6 ～ 16	6	6 ～ 12	6 ～ 12	4 ～ 12	4 ～ 12	4 ～ 20	6 ～ 12	3 ～ 10	4 ～ 12	4 ～ 20	3 ～ 12	3 ～ 10	4 ～ 10	6 ～ 25	6 ～ 12	6 ～ 12	4 ～ 20	6 ～ 20	6 ～ 20	6 ～ 12	6 ～ 20	6 ～ 10	6
Underneck length (ℓ1)(mm)	7.5 ～ 24	-	-	28 ～ 120	-	-	14 ～ 68	18 ～ 70	26 ～ 92	10 ～ 18	14 ～ 68	18 ～ 73	-	14 ～ 45	17 ～ 45	23 ～ 55	-	14 ～ 45	17 ～ 45	23 ～ 55	24 ～ 105	24 ～ 105	-	11 ～ 55	-	23 ～ 50	23 ～ 50	-	60 ～ 85	-	28 ～ 90	-	-	-	-	-	-	-	-	-	12 ～ -	-	-	-	-
Machining Application	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove / Inclined Cuts	Plane / Side / Curved surface / Groove	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Curved surface	Plane / Side / Curved surface	Plane / Side / Curved surface	Plane / Side / Curved surface	Plane / Side / Curved surface / Groove / Plunging (Z feed)	Plane / Side / Curved surface / Groove / Plunging (Z feed)
Coating	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	DLC	Non-Coated	Non-Coated	Dia Coat	Non-Coated	For High Hardness (Silicon Group)	For High Hardness (Silicon Group) / Non-Coated	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	-	-	DLC	For General Steels (AlCrN, etc.)	TiAlN	TiAlN	TiAlN	For General Steels (AlCrN, etc.)	Non-Coated
Type	High-Feed Radius	High-Feed Radius	High-Feed Radius	Long-Neck Radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	Tapered neck radius	Tapered neck radius	High-Feed Radius	radius	radius	radius	radius	radius	radius	radius	Long-Neck Radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius
Torsion Angle (θ)	No torsion	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Other	-	-	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	No torsion	No torsion
R Precision(μm)	±0.02	±0.015	±0.015	±0.015	±0.01	±0.01	±0.01	±0.01	±0.01	±0.01	±0.01	±0.01	±0.01	±0.01 ～ ±0.02	±0.01 ～ ±0.02	±0.01 ～ ±0.02	±0.02	±0.01 ～ ±0.02	±0.01 ～ ±0.02	±0.01 ～ ±0.02	±0.02	±0.02	±0.005	±0.02	±0.02	±0.01 ～ ±0.02	±0.01 ～ ±0.02	±0.02	±0.02	±0.02	±0.015	±0.02	±20	±10	±10	±0.02	-	-	-0.032～-0.059 ～ -0.014～-0.028	0～-0.030	-0.032～-0.059 ～ -0.014～-0.028	0～-0.030 ～ 0～-0.015	-0.032～-0.059 ～ -0.014～-0.028	-	-

BrandNhãn hiệu
Product SeriesDòng sản phẩm

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	OSG	OSG
Product SeriesDòng sản phẩm	TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute / no side blade	TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / stub model	TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / short model	TSC series carbide radius end mill, 4-flute, 45° spiral / short, long neck model	TSC series carbide radius end mill (for shrinkage fitting), 3-flute, 45° spiral / stub model	TSC series carbide radius end mill (for shrinkage fitting), 4-flute, 45° spiral / stub model	TSC series carbide radius end mill, 3-flute, 45° spiral / stub model	TSC Series Carbide Radius End Mill, 3-Flute / 45° Spiral / Short Type	TSC series carbide radius end mill, 3-flute, 45° spiral / regular model	TSC series carbide radius end mill, 4-flute, 45° spiral / long shank, short model	TSC series carbide radius end mill, 4-flute, 45° spiral / stub model	TSC series carbide radius end mill, 4-flute, 45° spiral / short model	TSC series carbide radius end mill, 2-flute stub model	TSC series carbide radius end mill, 2-flute / 1.5D Flute Length (stub) model	TSC series carbide radius end mill, 2-flute / short model	TSC series carbide radius end mill, 2-flute / regular model	TSC Series Carbide Radius End Mill for Shrink Fit Holder/4-Flute/Stub Type	TSC Series Carbide Radius End Mill 4-Flute / Stub Type	TSC series carbide radius end mill, 4-flute / short model	TSC series carbide radius end mill, 4-flute / regular model	TSC series carbide radius end mill, 3-flute, 45° spiral, stub / tapered neck model	TSC series carbide radius end mill, 4-flute, 45° spiral, stub / tapered neck model	TSC Series Carbide Radius End Mill (for Shrinkage Fitting / Radius (R) Accuracy ±5 UM), for High-Hardness Steel Machining, 4-Flute, 45° Spiral / Stub Model	TSC Series Carbide Radius End Mill for High-Hardness Copper Machining, Multi-Blade, Spiral / Stub Model	TSC Series Carbide Radius End Mill for Stainless Steel Machining, 3-Flute / 45° Spiral / Short Type	DLC Coated Carbide Radius End Mill for Aluminum Machining, 2-Flute / Regular Model	Carbide Radius End Mill for Aluminum Machining, 2-Flute / Regular Model	Carbide Radius End Mill for Aluminum Machining, 3-Flute / Stub, Long Shank Model	Diamond Coated Carbide Radius End Mill for Graphite Machining, 4-Flute / Long Model	Carbide Radius End Mill for Resin Machining, 2-Flute / Regular Model	TSC Series Coated Carbide Radius End Mill, 3-Flute, 45° Spiral / Short, Long Neck Model	Non-Coated TS Coated Carbide 0.1 mm Unit Radius Designated End Mill	XCP Coated Carbide Radius End Mill For Tempered Steel / High Hardness Steel Machining / 4-Flute / Blade Length 2.5D Type / Regular Type	XCP Coated Carbide Radius End Mill For Tempered Steel / High Hardness Steel Machining / 4-Flute / Regular Type	XCP Coated Carbide Radius End Mill / For Tempered Steel / High Hardness Steel Machining / 3-Flute / 45° Torsion / Blade Length 2.5D Type	TSC Series Carbide Uneven Lead 4-Flute Radius End Mill	VAC Series Carbide 2-Flute Radius End Mill	VAC Series Carbide 4-Flute Uneven Lead Radius End Mill	DLC Mill, Radius 2DLCM-R	GSX, Radius, 2.5D, GSXVL4T-R-2.5D	X's Mill Geo Radius 4GEOLS-R	GS MILL radius GS4-R	X's Mill Geo Radius 4XSGEO-R	GX3000 Micro Grain Carbide End Mills TiAlN coated 2 Flutes Short with Corner Radius	CBN End Mills 2 Flutes Short with Corner Radius

Loading...Tải…