Grooving / Cutting Off Holders

• You can add up to 6 items per a category to the compare list. Compare

  

  Inner Diameter Groove SIGE Type Compatible Chip

  KYOCERA

  B dimension: Indicates machinable groove depth.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: 432,221 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Lathe Turning (Cutter) Bit GDM Model

  KYOCERA

  Conventional insert mounting to new holders is not recommended.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	No-hand	-	-	-

  From: 268,471 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Lathe Turning/Cutting Holder KGD Model (Combination)

  KYOCERA

  If the holder is used as a positive tool, the holder jaw could interfere with the tool presetter.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: 3,023,250 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Slit Tip GDM Type

  KYOCERA

  When groove machining is performed with PF and PM breakers (for parting), the groove bottom shape will not be flat.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand / No-hand	-	-	-

  From: 342,973 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Cutter Holder TKR/L Type

  KYOCERA

  P is a special breaker designed for automatic lathes and other low feeds. At feeds of 0.03 to 0.08 mm/rev the chips are small curls and excellent chip discharge performance is demonstrated.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: 239,388 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Lathe Turning/Cutting (Multi-Function) Bit GMM Model

  KYOCERA

  Machinable groove depth is limited depending on workpiece diameter.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand / No-hand	-	-	-

  From: 279,130 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Grooved Bit (for outer diameter deep groove, perforating) GNDL Type

  SUMITOMO ELECTRIC HARDMETAL

  High-stiffness design suppresses vibrations during cutting. Ideal for grooving, deep grooving and parting-off.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Cutting off	2 ～ 6	20 ～ 25(23)	Right-hand / Left-hand	-	2 Corner	20 ～ 25

  From: 4,761,892 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Slit Tip (For Small Diameters) TKF Type

  KYOCERA

  [Features]· Lead angle (front cutting blade angle: θ) indicates the angle when mounted to the holder.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: 512,135 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Cutter Holder (Integrated Type) KTKH-S Type

  KYOCERA

  [Specifications]·Machining applications: parting-off; holder angle (°): 0; type: integrated type; compatible insert: TKN, TKN-P, TKR/L, TKR/L-P

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	-	-	-	-

  From: 3,442,355 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Chip for Grooving

  KYOCERA

  The edge width tolerance of GB32$050 is different. (0.50 + 0.05 0)

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: 363,693 VND
  Days to Ship: Số ngày giao hàng: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Punching Blade KTKB-S Type

  KYOCERA

  P is a special breaker designed for automatic lathes and other low feeds. At feeds of 0.03 to 0.08 mm/rev the chips are small curls and excellent chip discharge performance is demonstrated.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand / No-hand	-	-	-

  From: 3,007,286 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Holder For Cut-Off, CTP

  NGK SPARK PLUG

  A holder for parting-off machining with a maximum parting-off diameter of ø12 and tightening specifications for both front and back.Compatible insert: CTP-CX, CTP, CTP-X, CTPXWrench: CLR-15S

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Cutting off	-	-	Right-hand / Left-hand	-	-	-

  From: 2,971,226 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Multi-Functional / Grooving Holder KGM -T Type (Deep Grooving Type)

  KYOCERA

  If using GMG/GMM type (2-cornered) inserts, set the maximum grooving depth to 15 mm.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: 3,160,530 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Inner Diameter Groove SIGE-EH Type Excellent Bar (with Coolant Hole)

  KYOCERA

  [Specifications]·Machining applications: grooving; holder angle (°): 90; lubrication hole (oil hole): yes; screw clamp enables good cutting chip discharge

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: 3,566,470 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Inner Diameter Groove EZG Type (Small Inner Diameter Grooving)

  KYOCERA

  T dimension: Shows the machinable groove depth.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand	-	-	-

  From: 765,046 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Slit Tip GDMS Type

  KYOCERA

  When groove machining is performed with PF and PM breakers (for parting), the groove bottom shape will not be flat.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	No-hand	-	-	-

  From: 260,105 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Shallow Groove Holder KGBA Type

  KYOCERA

  [Features]This is a lever lock type holder that can be used for shallow grooving on outer diameters.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: 2,944,948 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Lathe Turning (Cutter) Holder KGD Model (for Combination/Automatic Type)

  KYOCERA

  If the holder is used as a positive tool, the holder jaw could interfere with the tool presetter.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: 2,898,945 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Lathe Turning/Cutting Holder Main Body KGD-S Model (Straight Type: 0°, Parting Type)

  KYOCERA

  [Specifications]·Machining applications: grooving / parting-off; holder angle (°): 0; type: modular type (blade); compatible tip: GDM, GDMS, GDG, GDGS

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: 2,403,956 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  KGDS-S Type Blade for Grooving/Plunging

  KYOCERA

  [Specifications]·Machining applications: grooving / parting-off; holder angle (°): 0; type: modular type (blade); compatible tip: GDM, GDMS, GDG, GDGS

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: 1,927,453 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Multi-Functional / Grooving (Cutting-Off) Chip GMG Type

  KYOCERA

  Sharp edge specification enables 40% reduction in cutting resistance from C surface specification.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	No-hand	-	-	-

  From: 446,563 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Multi-Functional / Grooving (Cutting-Off) Chip GMM Type

  KYOCERA

  Sharp edge specification enables 40% reduction in cutting resistance from C surface specification.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	No-hand	-	-	-

  From: 332,616 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Small Bore Slotting System Bar, Model VNG

  KYOCERA

  Solid type system bar.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand	-	-	-

  From: 968,483 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Micro Groove Cutter (Twin Bar) Mode TWFG (Side Cutting)

  KYOCERA

  The MIN dimension (0) for the end face groove outer diameter øD indicates the possible expansion to the center following machining of the initial groove in the range MIN-MAX.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Left-hand	-	-	-

  From: 798,760 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Slit Tip GMM Type

  KYOCERA

  A breaker developed for cutting off, where the sharpness of an automatic lathe or similar is required. Drastically reduces remaining center part.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / No-hand	-	-	-

  From: 353,333 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Grooved End Face Holder (for GVF Chip) GFVT Type

  KYOCERA

  [Features]· Blade exchange enables this holder to support various groove diameters.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Edge surface grooving	-	5.1(4.6) ～ 8.1(8.1)	Right-hand / Left-hand	50（∞） ～ 250（∞）	-	-

  From: 5,803,958 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Lathe Turning/Cutting (Multi-Function) Bit GMN Model

  KYOCERA

  Machinable groove depth is limited depending on workpiece diameter.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	No-hand	-	-	-

  From: 239,388 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Multi-Functional / Grooving Holder KGM Type

  KYOCERA

  4.0 mm wide insert can also be mounted on KGM & 1212H-3, but this is not recommended due to the lack of holder rigidity.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: 3,007,286 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Inner Diameter Groove SIGE-WH-90 Type Compatible Sleeve

  KYOCERA

  [Specifications]·no cutting direction; lubrication hole (oil hole): yes; compatible sleeve: It can be used in combination with a holder to change the tool runout.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	No-hand	-	-	-

  From: 3,356,958 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Large Inner Diameter Deep Grooved Holder [For GIA Tip] Compatible Chip

  KYOCERA

  Clamp-on type large inner diameter deep grooving holder.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	No-hand	-	-	-

  From: 322,256 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Small Bore End Surface Slotting, EZ Bar Conforming Tip

  KYOCERA

  T dimension: Shows the machinable groove depth.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand	-	-	-

  From: 889,350 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Small Diameter End Face Grooving Holder [for GVF-AA chip] Model GFVS - AA

  KYOCERA

  [Specifications]·Compatible insert shape: non-ISO standard; clamp method: clamp-on (C); clamp method: clamp-on (C)

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: 5,803,958 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Cutter Holder TKN Type

  KYOCERA

  P is a special breaker designed for automatic lathes and other low feeds. At feeds of 0.03 to 0.08 mm/rev the chips are small curls and excellent chip discharge performance is demonstrated.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	-	-	-	-

  From: 239,388 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sandvik T-Max Q-Cut Plunging/Grooving Boring Bit

  SANDVIK

  [Features]・ Boring tool bit for processing of inner diameter grooving, turning, profiling・ By adopting a screw clamp, the clamp rigidity is high and stable processing is possible[Applications]・ For inner diameter grooving, turning, profiling processing

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Inner Diameter Grooving / Profiling	-	-	-	-	-	-

  From: 5,911,620 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Holder For Cut-Off CTV-X

  NGK SPARK PLUG

  [Features]A parting-off tool.[Cutting Direction]Left hand[Compatible Insert]30 CTVs[Applications]Suitable for parting-off machining.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Cutting off	3	-	Left-hand	-	-	-

  From: 5,377,640 VND
  Days to Ship: Số ngày giao hàng: 14 Day(s) or more

  14 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Grooved Bit (multifunction outer diameter L type lateral groove) GNDMS Type

  SUMITOMO ELECTRIC HARDMETAL

  Its outstanding cutting chip handling performance and chattering resistance ensure machining.For outer diameter multi-function machining.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Horizontal feeding / Profiling	3 ～ 6	10 ～ 14	Right-hand / Left-hand	-	2 Corner	20 ～ 25

  From: 5,958,367 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Grooved Bit (for tip surface groove) GNDF Type

  SUMITOMO ELECTRIC HARDMETAL

  Its outstanding cutting chip handling performance and chattering resistance ensure machining.For face grooving.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Edge surface grooving	3 ～ 6	12 ～ 23	Right-hand / Left-hand	45 ～ 1000	2 Corner	20 ～ 25

  From: 4,408,156 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Shallow Groove Holder KGBAS Type

  KYOCERA

  A lever-lock type outer diameter shallow grooving holder.[Shank Material]Steel

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: 3,193,558 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Shallow Groove Holder [for GB/GBA Chip] KGB Type

  KYOCERA

  A clamp-on type outer diameter shallow grooving holder.[Shank Material]Steel

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: 2,944,948 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Lathe Turning (Cutter) Bit GDG Model

  KYOCERA

  Conventional insert mounting to new holders is not recommended.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	No-hand	-	-	-

  From: 367,431 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Lathe Turning Holder KGDS-S Model (Right Angle Type: 90°, Parting Type)

  KYOCERA

  If the holder is used as a positive tool, the holder jaw could interfere with the tool presetter.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: 4,144,221 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Multi-Functional / Grooving Holder KGM Type (For Automatic Board)

  KYOCERA

  4.0 mm wide insert can also be mounted on KGM & 1212H-3, but this is not recommended due to the lack of holder rigidity.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: 2,965,665 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Multi-Functional / Inner Diameter Grooving Holder (KIGM-V Type)

  KYOCERA

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	No-hand	-	-	-

  From: 417,416 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Small Bore End Surface Slotting Series, Model VNFG (System Bar)

  KYOCERA

  The MIN dimension (0) for the end face groove outer diameter øD indicates the possible expansion to the center following machining of the initial groove in the range MIN-MAX.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand	-	-	-

  From: 889,996 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Micro Groove Cutter (Twin Bar) Model TWFGT (Vertical Cutting Type)

  KYOCERA

  The MIN dimension (0) for the end face groove outer diameter øD indicates the possible expansion to the center following machining of the initial groove in the range MIN-MAX.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand	-	-	-

  From: 798,760 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
Application
Groove Width(mm)
Maximum Groove Depth(mm)
Selfishly
Maximum Machining Diameter(mm)
Number of corners for tip use
Shank height(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	SUMITOMO ELECTRIC HARDMETAL	KYOCERA	KYOCERA	KYOCERA	KYOCERA	NGK SPARK PLUG	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	SANDVIK	NGK SPARK PLUG	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA
Product SeriesDòng sản phẩm	Inner Diameter Groove SIGE Type Compatible Chip	Lathe Turning (Cutter) Bit GDM Model	Lathe Turning/Cutting Holder KGD Model (Combination)	Slit Tip GDM Type	Cutter Holder TKR/L Type	Lathe Turning/Cutting (Multi-Function) Bit GMM Model	SEC-Grooved Bit (for outer diameter deep groove, perforating) GNDL Type	Slit Tip (For Small Diameters) TKF Type	Cutter Holder (Integrated Type) KTKH-S Type	Chip for Grooving	Punching Blade KTKB-S Type	Holder For Cut-Off, CTP	Multi-Functional / Grooving Holder KGM -T Type (Deep Grooving Type)	Inner Diameter Groove SIGE-EH Type Excellent Bar (with Coolant Hole)	Inner Diameter Groove EZG Type (Small Inner Diameter Grooving)	Slit Tip GDMS Type	Outer Diameter Shallow Groove Holder KGBA Type	Lathe Turning (Cutter) Holder KGD Model (for Combination/Automatic Type)	Lathe Turning/Cutting Holder Main Body KGD-S Model (Straight Type: 0°, Parting Type)	KGDS-S Type Blade for Grooving/Plunging	Multi-Functional / Grooving (Cutting-Off) Chip GMG Type	Multi-Functional / Grooving (Cutting-Off) Chip GMM Type	Small Bore Slotting System Bar, Model VNG	Micro Groove Cutter (Twin Bar) Mode TWFG (Side Cutting)	Slit Tip GMM Type	Grooved End Face Holder (for GVF Chip) GFVT Type	Lathe Turning/Cutting (Multi-Function) Bit GMN Model	Multi-Functional / Grooving Holder KGM Type	Inner Diameter Groove SIGE-WH-90 Type Compatible Sleeve	Large Inner Diameter Deep Grooved Holder [For GIA Tip] Compatible Chip	Small Bore End Surface Slotting, EZ Bar Conforming Tip	Small Diameter End Face Grooving Holder [for GVF-AA chip] Model GFVS - AA	Cutter Holder TKN Type	Sandvik T-Max Q-Cut Plunging/Grooving Boring Bit	Holder For Cut-Off CTV-X	SEC-Grooved Bit (multifunction outer diameter L type lateral groove) GNDMS Type	SEC-Grooved Bit (for tip surface groove) GNDF Type	Outer Diameter Shallow Groove Holder KGBAS Type	Outer Diameter Shallow Groove Holder [for GB/GBA Chip] KGB Type	Lathe Turning (Cutter) Bit GDG Model	Lathe Turning Holder KGDS-S Model (Right Angle Type: 90°, Parting Type)	Multi-Functional / Grooving Holder KGM Type (For Automatic Board)	Multi-Functional / Inner Diameter Grooving Holder (KIGM-V Type)	Small Bore End Surface Slotting Series, Model VNFG (System Bar)	Micro Groove Cutter (Twin Bar) Model TWFGT (Vertical Cutting Type)
From	432,221 VND	268,471 VND	3,023,250 VND	342,973 VND	239,388 VND	279,130 VND	4,761,892 VND	512,135 VND	3,442,355 VND	363,693 VND	3,007,286 VND	2,971,226 VND	3,160,530 VND	3,566,470 VND	765,046 VND	260,105 VND	2,944,948 VND	2,898,945 VND	2,403,956 VND	1,927,453 VND	446,563 VND	332,616 VND	968,483 VND	798,760 VND	353,333 VND	5,803,958 VND	239,388 VND	3,007,286 VND	3,356,958 VND	322,256 VND	889,350 VND	5,803,958 VND	239,388 VND	5,911,620 VND	5,377,640 VND	5,958,367 VND	4,408,156 VND	3,193,558 VND	2,944,948 VND	367,431 VND	4,144,221 VND	2,965,665 VND	417,416 VND	889,996 VND	798,760 VND
Days to ShipSố ngày giao hàng	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	9 Day(s)	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	7 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	7 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	6 Day(s) or more	7 Day(s) or more	10 Day(s) or more	8 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	9 Day(s)	14 Day(s) or more	9 Day(s)	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	6 Day(s) or more	10 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more
Application	-	-	-	-	-	-	Outer Diameter Grooving / Cutting off	-	-	-	-	Cutting off	-	-	-	-	-	-	-	-	-	-	-	-	-	Edge surface grooving	-	-	-	-	-	-	-	Inner Diameter Grooving / Profiling	Cutting off	Outer Diameter Grooving / Horizontal feeding / Profiling	Edge surface grooving	-	-	-	-	-	-	-	-
Groove Width(mm)	-	-	-	-	-	-	2 ～ 6	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	3	3 ～ 6	3 ～ 6	-	-	-	-	-	-	-	-
Maximum Groove Depth(mm)	-	-	-	-	-	-	20 ～ 25(23)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	5.1(4.6) ～ 8.1(8.1)	-	-	-	-	-	-	-	-	-	10 ～ 14	12 ～ 23	-	-	-	-	-	-	-	-
Selfishly	Right-hand / Left-hand	No-hand	Right-hand / Left-hand	Right-hand / Left-hand / No-hand	Right-hand / Left-hand	Right-hand / Left-hand / No-hand	Right-hand / Left-hand	Right-hand / Left-hand	-	Right-hand / Left-hand	Right-hand / Left-hand / No-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand	No-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	No-hand	No-hand	Right-hand	Left-hand	Right-hand / No-hand	Right-hand / Left-hand	No-hand	Right-hand / Left-hand	No-hand	No-hand	Right-hand	Right-hand / Left-hand	-	-	Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	No-hand	Right-hand / Left-hand	Right-hand / Left-hand	No-hand	Right-hand	Right-hand
Maximum Machining Diameter(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	50（∞） ～ 250（∞）	-	-	-	-	-	-	-	-	-	-	45 ～ 1000	-	-	-	-	-	-	-	-
Number of corners for tip use	-	-	-	-	-	-	2 Corner	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	2 Corner	2 Corner	-	-	-	-	-	-	-	-
Shank height(mm)	-	-	-	-	-	-	20 ～ 25	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	20 ～ 25	20 ～ 25	-	-	-	-	-	-	-	-

BrandNhãn hiệu
Product SeriesDòng sản phẩm

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	SUMITOMO ELECTRIC HARDMETAL	KYOCERA	KYOCERA	KYOCERA	KYOCERA	NGK SPARK PLUG	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	SANDVIK	NGK SPARK PLUG	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA
Product SeriesDòng sản phẩm	Inner Diameter Groove SIGE Type Compatible Chip	Lathe Turning (Cutter) Bit GDM Model	Lathe Turning/Cutting Holder KGD Model (Combination)	Slit Tip GDM Type	Cutter Holder TKR/L Type	Lathe Turning/Cutting (Multi-Function) Bit GMM Model	SEC-Grooved Bit (for outer diameter deep groove, perforating) GNDL Type	Slit Tip (For Small Diameters) TKF Type	Cutter Holder (Integrated Type) KTKH-S Type	Chip for Grooving	Punching Blade KTKB-S Type	Holder For Cut-Off, CTP	Multi-Functional / Grooving Holder KGM -T Type (Deep Grooving Type)	Inner Diameter Groove SIGE-EH Type Excellent Bar (with Coolant Hole)	Inner Diameter Groove EZG Type (Small Inner Diameter Grooving)	Slit Tip GDMS Type	Outer Diameter Shallow Groove Holder KGBA Type	Lathe Turning (Cutter) Holder KGD Model (for Combination/Automatic Type)	Lathe Turning/Cutting Holder Main Body KGD-S Model (Straight Type: 0°, Parting Type)	KGDS-S Type Blade for Grooving/Plunging	Multi-Functional / Grooving (Cutting-Off) Chip GMG Type	Multi-Functional / Grooving (Cutting-Off) Chip GMM Type	Small Bore Slotting System Bar, Model VNG	Micro Groove Cutter (Twin Bar) Mode TWFG (Side Cutting)	Slit Tip GMM Type	Grooved End Face Holder (for GVF Chip) GFVT Type	Lathe Turning/Cutting (Multi-Function) Bit GMN Model	Multi-Functional / Grooving Holder KGM Type	Inner Diameter Groove SIGE-WH-90 Type Compatible Sleeve	Large Inner Diameter Deep Grooved Holder [For GIA Tip] Compatible Chip	Small Bore End Surface Slotting, EZ Bar Conforming Tip	Small Diameter End Face Grooving Holder [for GVF-AA chip] Model GFVS - AA	Cutter Holder TKN Type	Sandvik T-Max Q-Cut Plunging/Grooving Boring Bit	Holder For Cut-Off CTV-X	SEC-Grooved Bit (multifunction outer diameter L type lateral groove) GNDMS Type	SEC-Grooved Bit (for tip surface groove) GNDF Type	Outer Diameter Shallow Groove Holder KGBAS Type	Outer Diameter Shallow Groove Holder [for GB/GBA Chip] KGB Type	Lathe Turning (Cutter) Bit GDG Model	Lathe Turning Holder KGDS-S Model (Right Angle Type: 90°, Parting Type)	Multi-Functional / Grooving Holder KGM Type (For Automatic Board)	Multi-Functional / Inner Diameter Grooving Holder (KIGM-V Type)	Small Bore End Surface Slotting Series, Model VNFG (System Bar)	Micro Groove Cutter (Twin Bar) Model TWFGT (Vertical Cutting Type)

Loading...Tải…