Screwdrivers（Page2）

• You can add up to 6 items per a category to the compare list. Compare

  

  Cross-Head Screwdriver Tip Size No. 00 to 2

  HOZAN

  A screwdriver enabled to \ deal with screws in hard-to-reach places by reducing the outer diameter of the screwdriver shaft.[Features]· Hole diameter is compatible with deep screws because the shaft has a thinner finish than even JIS standards.· Shaft is thin but still complies with JIS "torsional strength" standards.· The basic hardening treatment for shaft strength is skilled full quenching.· The polypropylene grip with pen clip, which can be ins...Readmore

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+)	No.00 / No.0 / No.1 / No.2	-	75 ～ 300	Single Item	Round	NA	NA	NA	Rubber	-	-	-

  From: 129,599 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Pin Vise K-501

  HOZAN

  Vise driver for grasping small diameter drills and rotating them, and grasping pin (rod) shaped objects securely.[Features]· Features a rotary head with embedded ball bearings, which offers great workability.· Vise for small diameter drills with rotating cap.· It can be smoothly rotated while pushing in the vertical direction.· With non-slip knurled grip, it is unlikely to slip and easy to rotate. It also has a thick body that makes it easy to apply force....Readmore

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  -	-	-	-	Single Item	-	-	-	-	-	-	-	-

  From: 526,976 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Standard Screwdriver No. 900, MEGADORA

  VESSEL

  Easy-to-use regular screwdriver that is easy to grip however you hold it.[Features]· The cross-recessed end is a jaw fit which firmly grips the screw.· The knurled shaft prevents slippage of fingers and enables holes in wood or boards to be widened.[Applications]· For various screw fastening work.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+) / Flathead (-)	No.1 / No.2 / No.3	6 ～ 8	75 ～ 150	Single Item	Round	Available	NA	NA	Resin	0.9 ～ 1.1	-	-

  From: 111,000 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Adjustable Driver D-29-100

  HOZAN

  Adjustment driver that uses metal only at the tip to eliminate adjustment deviation.[Features]· Blade width: 2, blade thickness: 0.5, shaft length: 100 mm.· Material: Stainless steel (tip), cellulose acetate (shaft).[Applications]· Can also be used for tip models (surface-mount device type).

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Flathead (-)	-	2	100	Single Item	Round	NA	NA	NA	Resin	0.5	-	-

  From: 119,591 VND
  Days to Ship: Số ngày giao hàng: Same day

  Same day

• You can add up to 6 items per a category to the compare list. Compare

  

  Super Cushion Tang-Thru Screwdriver No. 730

  VESSEL

  Super-cushion through screwdriver with built-in gel that fits in the palm of your hand.[Features]· Through type with a star-shaped nut which can be hit with a hammer.· The shaft is tough and whole body is quenched with excellent durable chromium vanadium metal.· Plated with a rust-resistant, black chrome finish.[Applications]· For various screw fastening work.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+) / Flathead (-)	No.1 / No.2 / No.3	6 ～ 8	75 ～ 150	Single Item	Round	Available	Available	NA	Rubber	0.9 ～ 1.1	-	-

  From: 122,060 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Interchangeable Screwdriver Set D-44

  HOZAN

  Screwdriver set with interchangeable shafts.[Features]· Bargain 3-piece set.· Chuck case included.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+)/Flathead(-)	No.00 / No.1 / No.2	2.5 ～ 5.5	57	Set Product	Round	NA	-	-	Rubber	0.4 ～ 0.9	-	-

  From: 521,665 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Slotted screwdriver D-630 – D-655

  HOZAN

  [Features]· Designed to deal with the screws in hard-to-reach places by reducing the outer diameter of the screwdriver shaft.· Hole diameter is compatible with deep screws like those in household appliances because the shaft has a thinner finish than even JIS standards.· Even when thin, "torsional strength" abides by JIS standards.· The basic hardening treatment for shaft strength is thermal hardening treatment involving skill...Readmore

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Flathead (-)	-	2.5 ～ 5.5	75 ～ 100	Single Item	Round	NA	NA	NA	Rubber	0.35 ～ 0.8	-	-

  From: 121,983 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Electroscopic Screwdriver DKD-01/DKD-02

  ENGINEER

  Screwdriver for low voltage and automobile spark plug electrical inspection.[Features]· With a clip, it is convenient for carrying around.· The built-in neon tube lights up.[Applications]· DKD-01: Ideal for conductivity and wireless communicator transmission tests.· DKD-02: Ideal for vehicle spark plug voltage detection.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Flathead (-)	-	-	28	Single Item	Round	NA	NA	NA	Resin	-	-	-

  From: 185,228 VND
  Days to Ship: Số ngày giao hàng: Same day

  Same day

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Precision Screwdriver (3450)

  ANEX

  [Features]· A long shaft type.· Comes with rotating cap.· Acetate Resin Handle

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+) / Flathead (-)	No.00 / No.0	1.8 ～ 3	50 ～ 75	Single Item	Round	NA	NA	NA	Resin	-	-	-

  From: 61,540 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  

  Ultra-Stubby Mini Switchable Screwdriver

  ANEX

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+)/Flathead(-)	No.2	6	-	Single Item	Round	NA	-	-	Resin	-	-	-

  From: 132,667 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Quick Ball 60 Ratchet Screwdriver (Magnetic)

  ANEX

  [Features]·60 gear teeth. Smooth rotation and excellent workability.·A special minus shape that can be inserted into the removal hole of the wiring terminal.·A ratchet mechanism that allows you to turn the screw by repeatedly turning left and right without changing the handle.·A replaceable bit that can also be used as an electric bit.·With magnet (bit).·The elastomer resin and ball-shaped handle are easy to apply force.·The insertion angl...Readmore

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+)/Flathead(-)	No.2	6	95	Single Item	Square	Available	-	-	Rubber	-	-	-

  From: 376,663 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Longnose Screwdriver

  PB SWISS TOOLS

  A screwdriver with excellent shock resistance which can be used for general purposes.[Features]· Screwdriver with excellent track record, millions of units sold over the past several decades.· The grip surface fits the hand and the groove design is ergonomic, allowing high torque to be applied.· The high quality and transparent CAB material is extremely resistant to impacts as well as resistant to oil and gasoline, and can be recycled.[Appl...Readmore

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Flathead (-)	-	2 ～ 5.5	50 ～ 250	Single Item	Round	NA	NA	NA	Resin	0.3 ～ 0.8	-	-

  From: 235,028 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Soft screwdriver (with magnet)

  KTC(KYOTO TOOL)

  [Features]· The grip is light, not sticky, and uses environmentally friendly elastomer resin.· The shaft is round.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+) / Flathead (-)	No.1 / No.2 / No.3	5.5 ～ 8	75 ～ 300	Single Item	Round	Available	NA	NA	Rubber	0.75 ～ 1.1	-	-

  From: 196,581 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Micro Screwdrivers (Set of 3)【1-3 Pieces Per Package】

  VESSEL

  A set of three precision screwdrivers in sizes which are used frequently. Easy-to-use slender clip with a tip cap for quick turning.[Features]· Two types are available according to the type of precision work.· Frequently used sizes make up a set.[Applications]· For adjustment and repair of precision instruments, electrical equipment, glasses, watches, etc.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+)/Flathead(-)	No.00 / No.0	1.8 ～ 3	50 ～ 100	Set Product	Round	NA	NA	NA	Resin	-	-	-

  From: 179,700 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  

  

  

  

  

  

  

  

  Megadora Thin-handle Screwdriver No.910

  VESSEL

  Thin shaft screwdriver.[Features]· Fine shaft type with a diameter of 4 mm or less.· The blade has a black point treatment without a thick plating layer.[Applications]· It is convenient especially when working on deep and narrow places.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+) / Flathead (-)	No.0 / No.1	3 ～ 4	75 ～ 200	Single Item	Round	Available	NA	NA	Resin	0.4 ～ 0.5	-	-

  From: 72,600 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Screwdriver for Precision Special Screws DAP-01/DAP-02

  ENGINEER

  A compact design screwdriver for precision special screws.[Features]· The grip part has a rotating cap.· Uses anti-slip knurling.· DAP-01: For adjustment work of star-shaped screws (pentalobular screws).· DAP-01: For smartphone strap attachment and repair.[Applications]· DAP-01: Ideal for accessory replacement of smartphones.· DAT-02: Ideal for repair and maintenance of portable game machines.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Torx / Other	-	-	23	Single Item	Round	NA	NA	NA	Rubber	-	-	-

  From: 279,928 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Anti-falling Electric Work Screwdriver (Magnetic Tip)

  TRUSCO NAKAYAMA

  360-degree rotation function that is easy to turn but unlikely to get tangled prevents drivers from falling off while working in high places.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+) / Flathead (-)	No.2	6	100 ～ 150	Single Item	Round	Available	NA	NA	Resin	-	-	-

  From: 178,000 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Precision Driver (SP-2.5, SP-3 Series)

  SMATO

  • Volume Discount

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+) / Flathead (-)	-	-	-	Single Item	Round	-	-	-	Rubber	-	-	-

  From: 368,250 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Torsion Bit【1-10 Pieces Per Package】

  VESSEL

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+)	-	-	65 ～ 110	Set Product	-	-	-	-	-	-	-	-

  From: 1,090,953 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s)

  4 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Screwdriver, Electric Test Driver (-) 100-380V FKD-01

  FUJIYA

  A 6-piece set of precision screwdrivers. [Features]]· The handle is made of brass material with superior rust-proof properties. ]· By using the "rotating head," screwdrivers can be quickly and easily rotated for detailed work. ][Applications]]· For assembling and repairing glasses, watches, cameras, etc.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Flathead (-)	-	-	-	Single Item	-	-	-	-	-	-	-	-

  From: 161,609 VND
  Days to Ship: Số ngày giao hàng: Same day

  Same day

• You can add up to 6 items per a category to the compare list. Compare

  

  [6 Pcs] (+)(-) Hammerhead Screwdriver (With Handle-Side Hexagonal Shaft) EA560E-600

  ESCO

  【Product Specifications】・…Set of 6 pcs・(+)Driver…tip x shaft dia.・shaft length：#1x5mm・80mm,#2x6mm・100mm,#3x8mm・150mm・(-)Driver…blade width x thickness・ shaft length：3.5x0.6mm・80mm,5.5x1.0mm・100mm,9.0x1.6mm・150mm・Hammerhead handle allows hammering・With handle-side hex shaft・(-)3.5 x 0.6mm is not equipped with handle-side hex shaft, metal cap for the hammer.・With tool bag・The color and material of th...Readmore

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  -	-	-	-	-	-	-	-	-	-	-	-	-

  From: 3,133,560 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Cross-Head Through Type Screwdriver With Wooden Handle

  KTC(KYOTO TOOL)

  [Features]· Traditional screwdriver that makes use of the warm texture of wood.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+)	No.1 / No.2 / No.3 / No.4	-	-	Single Item	Round	NA	Available	NA	Wooden handle	-	-	-

  From: 277,430 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  SUS Screwdriver Set SD8

  TONE

  An 8-piece all-stainless steel screwdriver set, which is lightweight thanks to its sealed hollow grip section, and which features excellent workability and corrosion resistance.[Features]· The shaft uses martensitic stainless steel material, and the grip uses austenitic stainless steel material.· Stainless steel tool with emphasized strength, corrosion resistance, chemical resistance and hygiene.[Applications]· Ideal for food-related equipment, medi...Readmore

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+)/Flathead(-)	No.1 / No.2 / No.3	5.5 ～ 8	35 ～ 150	Set Product	Round	NA	NA	NA	Stainless Steel	0.8 ～ 1.1	-	-

  From: 7,597,113 VND
  Days to Ship: Số ngày giao hàng: 4 Day(s) or more

  4 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Pin Vise K-502

  HOZAN

  Fine drill pin vise for applications including but not limited to grasping small diameter drills and rotating them, including grasping pin (rod) shaped objects securely.[Features]· As the main body is compact, it is easy to see the work at hand.· Also, there is less load in continuous work as it is a light finish.· Body is rather thick which makes it easy to apply force, and it has line knurling which makes it anti-slip and easy to turn.[Applications]· It can also ...Readmore

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  -	-	-	-	Single Item	-	-	-	-	-	-	-	-

  From: 276,066 VND
  Days to Ship: Số ngày giao hàng: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  Interchangeable Screwdrivers D-52, D-54, D-58

  HOZAN

  Screwdriver with interchangeable shaft.[Features]· The tip is a combination of Phillips and flathead shapes.· Tip size: D-52 +No. 00 / -2.5 X 0.4, D-54 +No. 1 / -4.0 X 0.55, D-58 +No. 2 / -5.5 X 0.9.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+)/Flathead(-)	No.00 / No.1 / No.2	2.5 ～ 5.5	57	Single Item	Round	NA	-	-	Rubber	0.4 ～ 0.9	-	-

  From: 170,464 VND
  Days to Ship: Số ngày giao hàng: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  LED Electrical Screwdriver DKD-03

  ENGINEER

  LED electrical test screwdriver that can perform conduction checks.[Features]· Bright LED inside the grip is turned on when the tip comes into contact with the live wire end of sockets for regular homes/factories.· Includes a blade tip protection cap.[Applications]· For checking the conductivity of electric products.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Flathead (-)	-	3	20	Single Item	Round	NA	NA	NA	Resin	0.4	-	-

  From: 226,961 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Mini Soft Screw Driver DG-21 – 24

  ENGINEER

  Mini soft screwdriver ideal for tightening and removing various screws.[Features]· It is a soft grip which fits well in the hand.· The shaft is chrome-vanadium steel.· The tip has been black-point processed.[Applications]· For tightening and removing various screws.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+) / Flathead (-)	No.00 / No.0	3 ～ 4	80	Single Item	Round	NA	NA	NA	Rubber	0.4 ～ 0.5	-	-

  From: 138,293 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Hex Driver DH

  ENGINEER

  Screwdriver with hexagonal-shaped tip.[Features]・ Various sizes are available according to the size of the hex socket head screw・ Shaft is made of chrome molybdenum steel[Applications]・ Tightening and removing hex socket head screw

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Hexagon	-	-	90	Single Item	Square	NA	NA	NA	Resin	-	2.5 ～ 5	-

  From: 64,760 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  

  

  

  

  

  Special Precision Screwdriver

  ANEX

  [Features]· This is a special precision screwdriver for screws that are used in mobile phones, computers, etc.· The grip back part is a rotating cap.· It has an excellent tough abrasion-resistant blade (quenched).

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Torx / Other	-	-	20	Single Item	Round	NA	NA	NA	Resin	-	-	-

  From: 185,260 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Screwdriver, Pin Vise

  ANEX

  [Features]· It can be used to open small holes and as a tap holder in precision machining, building hobby items and many other applications.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  -	-	-	-	Single Item	-	-	-	-	Stainless Steel	-	-	-

  From: 206,623 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Screwdriver Set with Voltage Detector

  TRUSCO NAKAYAMA

  [Features]· When the tip of the screwdriver is brought into contact with an outlet, etc., and you press the rear end of the grip, the neon tube inside the grip activates and you can see the current flow.· Suitable for checking the presence or absence of electric current in the electric wire.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Combination	No.1 / No.2	3 ～ 5	-	Set Product	Round	NA	NA	NA	Resin	-	-	-

  From: 331,196 VND
  Days to Ship: Số ngày giao hàng: Same day

  Same day

• You can add up to 6 items per a category to the compare list. Compare

  

  Chisel Driver Set (Penetrating Type)

  WERA

  Tang-thru screwdriver cross-head set that can be given a shot.[Features]・ With a bolster that can be strongly fastened with a wrench or the like.・ The special grip shape realizes ease of grip and fit.・ It comes with a cap to receive impacts on the head of the handle.・ With a handle-penetrating shaft that does not break even if it receives an impact from a mallet.・ It allows you to tighten screws straight.・ The handle is designed according to er...Readmore

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+)/Flathead(-)	No.1 / No.2 / No.3	3.5 ～ 9	80 ～ 150	Set Product	Round	NA	Available	Included	Rubber	-	-	-

  From: 3,269,865 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Micro Screwdriver

  WERA

  [Features]· Uses a handle based on ergonomic design which is easy to carry, rotate and transmits torque reliably.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+) / Flathead (-)	No.00 / No.0 / No.1	0.8 ～ 4	40 ～ 100	Single Item	Round	NA	NA	NA	Rubber	-	-	-

  From: 215,470 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Hex rod type screwdriver for professionals

  EIGHT TOOL

  [Features]· Because the shaft is long, it is great for use in deep areas.· Handle employs a high-quality acetate resin which feels good to the touch and is shock resistant.· It is designed for professionals so as to exceed ISO and JIS standards.[Applications]· For tightening hex socket head bolts.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Hexagon	-	-	-	Set Product	Round	NA	NA	NA	Resin	-	0.71 ～ 2	-

  From: 846,090 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball point hex screwdriver 206S series

  PB SWISS TOOLS

  A screwdriver with excellent impact resistance of 1 t or higher. It is also resistant to oil and gasoline.[Features]· It can be used for general applications. Recyclable clip.· The grip surface fits the hand and the groove design is ergonomic, allowing high torque to be applied.· The high quality and transparent CAB material is extremely resistant to impacts as well as resistant to oil and gasoline, and can be recycled.· Gentle to the skin and comforta...Readmore

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Ballpoint	-	-	50 ～ 200	Single Item	Square	NA	NA	NA	Resin	-	1.27 ～ 10	-

  From: 426,665 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Screwdriver Set with Holder

  PB SWISS TOOLS

  A set of screwdrivers. Holder included.[Features]· A new color insert type has joined the most popular, classic handle Phillips/flathead screwdrivers.· Facilitates tool management by color-coding inserts by person or department

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+) / Flathead (-) / Phillips (+)/Flathead(-)	No.0 / No.1 / No.2 / No.3	3.5 ～ 10	60 ～ 180	Set Product	Round	NA	NA	NA	Resin	0.5 ～ 1.6	-	-

  From: 1,114,770 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ratchet Driver Set 8510R-100SET【21 Pieces Per Package】

  PB SWISS TOOLS

  A set of ratchet screwdrivers.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Combination	No.1 / No.2 / No.3	4 ～ 8	-	Set Product	Square	NA	-	-	Resin	0.6 ～ 1.2	2.5 ～ 6	-

  From: 4,332,551 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Soft screwdriver (penetrating type with magnet)

  KTC(KYOTO TOOL)

  [Features]· The grip is light, not sticky, and uses environmentally friendly elastomer resin.· The shaft is round.· Through-hole type.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+) / Flathead (-)	No.1 / No.2 / No.3	5.5 ～ 8	75 ～ 150	Single Item	Round	Available	Available	NA	Rubber	0.75 ～ 1.1	-	-

  From: 217,598 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Resin handle screwdriver set (Penetration, magnet included)【1-8 Pieces Per Package】

  KTC(KYOTO TOOL)

  [Features]· Shaft material is Cr-V.[Applications]· General purpose tool

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+)/Flathead(-)	No.1 / No.2 / No.3	5.5 ～ 8	26 ～ 150	Set Product	Round	Available	Available	Included / NA	Resin	0.7 ～ 1.2	-	-

  From: 1,963,386 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Ratchet driver DBR

  KTC(KYOTO TOOL)

  [Features]· The ratchet mechanism enables fast turning in both directions for loosening and tightening.· Fixing the ratchet allows it to be used as a normal screwdriver.[Applications]· General purpose tool

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Box / Combination / Other	No.1 / No.2 / No.3	5.5 ～ 8	-	Single Item / Set Product	Square	NA	-	-	Rubber	-	1.5 ～ 10	-

  From: 151,300 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  5700BD Cordless Screwdriver

  VESSEL

  Special blade tip shape that a 10-mm width across flats wrench integrated to a coin-type screwdriver.[Features]・ Metal line grip that changes color depending on the viewing angle・ Battery maintenance can be done with just this one・ Compact size that is easy to use even in the narrow space around the battery・ Shaft chrome vanadium steel, fully hardened[Applications]・ For tightening and loosening caps for replenishing battery fluid and...Readmore

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Flathead (-)	-	18	85	Single Item	Round	NA	NA	NA	Resin	1.6	-	-

  From: 198,875 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  NO.220 Ball Grip Screwdriver +3

  VESSEL

  Long and thin axis design, ideal for large terminal board screws +3. Cushion grip, with +3 display. Chrome-vanadium steel that is completely tempered. High precision black point processing of the blade edge.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+)	No.3	-	150	Single Item	Round	Available	NA	NA	Resin / Rubber	-	-	-

  From: 218,334 VND
  Days to Ship: Số ngày giao hàng: 14 Day(s)

  14 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  NO. TD-80 T-Type Ratchet Driver Set【5 Pieces Per Package】

  VESSEL

  [Features]· Screws can be tightened just by a repetitive motion of the wrist, without the need to change the handle

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+)/Flathead(-)	No.1 / No.2 / No.3	4 ～ 6	-	Set Product	-	NA	-	-	Resin	-	-	-

  From: 308,884 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Screwdriver with Anti-Drop Ring

  ANEX

  The cord does not tangle, even when the handle is turned by the rotating cap. With ring for attaching fall prevention cord. Ideal for work in high places.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+) / Flathead (-)	No.2	6	100 ～ 150	Single Item	Round	NA	NA	NA	Rubber	-	-	-

  From: 331,505 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  • On Sale Till 31/03/2025

  

  Screwdriver Set, TRD-S

  TRUSCO NAKAYAMA

  A ratchet mechanism is included, which turns the screw just by a repetitive motion of the wrist, without the need to re-grip the handle.

  Tip standards	Tip size / Phillips (+)	Tip size / flathead (-) blade width (mm) B1	Shaft length L (mm)	Single Product/Set Classification	Shaft type	Magnet	Shaft through	Bolster	Grip Type	Tip size / flathead (-) blade thickness (mm) B2	(Box/Hex/Ball-Point) Width Across Flats (mm)	(Box/Hex/Ball-Point) Width Across Flats (inch)
  Phillips (+)/Flathead(-)	No.0 / No.1 / No.2	1.8 ～ 6	-	Set Product	Round	NA	NA	NA	Resin	-	-	-

  From: 462,920 VND
  Special Price
  Days to Ship: Số ngày giao hàng: Same day

  Same day

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
Tip standards
Tip size / Phillips (+)
Tip size / flathead (-) blade width (mm) B1
Shaft length L (mm)
Single Product/Set Classification
Shaft type
Magnet
Shaft through
Bolster
Grip Type
Tip size / flathead (-) blade thickness (mm) B2
(Box/Hex/Ball-Point) Width Across Flats (mm)
(Box/Hex/Ball-Point) Width Across Flats (inch)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare On Sale Till 31/03/2025
BrandNhãn hiệu	HOZAN	HOZAN	VESSEL	HOZAN	VESSEL	HOZAN	HOZAN	ENGINEER	ANEX	ANEX	ANEX	PB SWISS TOOLS	KTC(KYOTO TOOL)	VESSEL	VESSEL	ENGINEER	TRUSCO NAKAYAMA	SMATO	VESSEL	FUJIYA	ESCO	KTC(KYOTO TOOL)	TONE	HOZAN	HOZAN	ENGINEER	ENGINEER	ENGINEER	ANEX	ANEX	TRUSCO NAKAYAMA	WERA	WERA	EIGHT TOOL	PB SWISS TOOLS	PB SWISS TOOLS	PB SWISS TOOLS	KTC(KYOTO TOOL)	KTC(KYOTO TOOL)	KTC(KYOTO TOOL)	VESSEL	VESSEL	VESSEL	ANEX	TRUSCO NAKAYAMA
Product SeriesDòng sản phẩm	Cross-Head Screwdriver Tip Size No. 00 to 2	Pin Vise K-501	Standard Screwdriver No. 900, MEGADORA	Adjustable Driver D-29-100	Super Cushion Tang-Thru Screwdriver No. 730	Interchangeable Screwdriver Set D-44	Slotted screwdriver D-630 – D-655	Electroscopic Screwdriver DKD-01/DKD-02	Precision Screwdriver (3450)	Ultra-Stubby Mini Switchable Screwdriver	Quick Ball 60 Ratchet Screwdriver (Magnetic)	Longnose Screwdriver	Soft screwdriver (with magnet)	Micro Screwdrivers (Set of 3)【1-3 Pieces Per Package】	Megadora Thin-handle Screwdriver No.910	Screwdriver for Precision Special Screws DAP-01/DAP-02	Anti-falling Electric Work Screwdriver (Magnetic Tip)	Precision Driver (SP-2.5, SP-3 Series)	Torsion Bit【1-10 Pieces Per Package】	Screwdriver, Electric Test Driver (-) 100-380V FKD-01	[6 Pcs] (+)(-) Hammerhead Screwdriver (With Handle-Side Hexagonal Shaft) EA560E-600	Cross-Head Through Type Screwdriver With Wooden Handle	SUS Screwdriver Set SD8	Pin Vise K-502	Interchangeable Screwdrivers D-52, D-54, D-58	LED Electrical Screwdriver DKD-03	Mini Soft Screw Driver DG-21 – 24	Hex Driver DH	Special Precision Screwdriver	Screwdriver, Pin Vise	Screwdriver Set with Voltage Detector	Chisel Driver Set (Penetrating Type)	Micro Screwdriver	Hex rod type screwdriver for professionals	Ball point hex screwdriver 206S series	Screwdriver Set with Holder	Ratchet Driver Set 8510R-100SET【21 Pieces Per Package】	Soft screwdriver (penetrating type with magnet)	Resin handle screwdriver set (Penetration, magnet included)【1-8 Pieces Per Package】	Ratchet driver DBR	5700BD Cordless Screwdriver	NO.220 Ball Grip Screwdriver +3	NO. TD-80 T-Type Ratchet Driver Set【5 Pieces Per Package】	Screwdriver with Anti-Drop Ring	Screwdriver Set, TRD-S
From	129,599 VND	526,976 VND	111,000 VND	119,591 VND	122,060 VND	521,665 VND	121,983 VND	185,228 VND	61,540 VND	132,667 VND	376,663 VND	235,028 VND	196,581 VND	179,700 VND	72,600 VND	279,928 VND	178,000 VND	368,250 VND	1,090,953 VND	161,609 VND	3,133,560 VND	277,430 VND	7,597,113 VND	276,066 VND	170,464 VND	226,961 VND	138,293 VND	64,760 VND	185,260 VND	206,623 VND	331,196 VND	3,269,865 VND	215,470 VND	846,090 VND	426,665 VND	1,114,770 VND	4,332,551 VND	217,598 VND	1,963,386 VND	151,300 VND	198,875 VND	218,334 VND	308,884 VND	331,505 VND	462,920 VND Special Price On Sale Till 31/03/2025
Days to ShipSố ngày giao hàng	Same day or more	9 Day(s)	9 Day(s)	Same day	9 Day(s)	9 Day(s)	Same day or more	Same day	9 Day(s)	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	7 Day(s) or more	9 Day(s)	9 Day(s)	9 Day(s)	Same day or more	Same day or more	4 Day(s)	Same day	6 Day(s) or more	9 Day(s)	4 Day(s) or more	5 Day(s) or more	Same day or more	9 Day(s)	9 Day(s)	9 Day(s)	9 Day(s)	9 Day(s)	Same day	6 Day(s) or more	9 Day(s)	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	9 Day(s)	9 Day(s)	9 Day(s)	9 Day(s)	9 Day(s)	14 Day(s)	9 Day(s)	9 Day(s)	Same day
Tip standards	Phillips (+)	-	Phillips (+) / Flathead (-)	Flathead (-)	Phillips (+) / Flathead (-)	Phillips (+)/Flathead(-)	Flathead (-)	Flathead (-)	Phillips (+) / Flathead (-)	Phillips (+)/Flathead(-)	Phillips (+)/Flathead(-)	Flathead (-)	Phillips (+) / Flathead (-)	Phillips (+)/Flathead(-)	Phillips (+) / Flathead (-)	Torx / Other	Phillips (+) / Flathead (-)	Phillips (+) / Flathead (-)	Phillips (+)	Flathead (-)	-	Phillips (+)	Phillips (+)/Flathead(-)	-	Phillips (+)/Flathead(-)	Flathead (-)	Phillips (+) / Flathead (-)	Hexagon	Torx / Other	-	Combination	Phillips (+)/Flathead(-)	Phillips (+) / Flathead (-)	Hexagon	Ballpoint	Phillips (+) / Flathead (-) / Phillips (+)/Flathead(-)	Combination	Phillips (+) / Flathead (-)	Phillips (+)/Flathead(-)	Box / Combination / Other	Flathead (-)	Phillips (+)	Phillips (+)/Flathead(-)	Phillips (+) / Flathead (-)	Phillips (+)/Flathead(-)
Tip size / Phillips (+)	No.00 / No.0 / No.1 / No.2	-	No.1 / No.2 / No.3	-	No.1 / No.2 / No.3	No.00 / No.1 / No.2	-	-	No.00 / No.0	No.2	No.2	-	No.1 / No.2 / No.3	No.00 / No.0	No.0 / No.1	-	No.2	-	-	-	-	No.1 / No.2 / No.3 / No.4	No.1 / No.2 / No.3	-	No.00 / No.1 / No.2	-	No.00 / No.0	-	-	-	No.1 / No.2	No.1 / No.2 / No.3	No.00 / No.0 / No.1	-	-	No.0 / No.1 / No.2 / No.3	No.1 / No.2 / No.3	No.1 / No.2 / No.3	No.1 / No.2 / No.3	No.1 / No.2 / No.3	-	No.3	No.1 / No.2 / No.3	No.2	No.0 / No.1 / No.2
Tip size / flathead (-) blade width (mm) B1	-	-	6 ～ 8	2	6 ～ 8	2.5 ～ 5.5	2.5 ～ 5.5	-	1.8 ～ 3	6	6	2 ～ 5.5	5.5 ～ 8	1.8 ～ 3	3 ～ 4	-	6	-	-	-	-	-	5.5 ～ 8	-	2.5 ～ 5.5	3	3 ～ 4	-	-	-	3 ～ 5	3.5 ～ 9	0.8 ～ 4	-	-	3.5 ～ 10	4 ～ 8	5.5 ～ 8	5.5 ～ 8	5.5 ～ 8	18	-	4 ～ 6	6	1.8 ～ 6
Shaft length L (mm)	75 ～ 300	-	75 ～ 150	100	75 ～ 150	57	75 ～ 100	28	50 ～ 75	-	95	50 ～ 250	75 ～ 300	50 ～ 100	75 ～ 200	23	100 ～ 150	-	65 ～ 110	-	-	-	35 ～ 150	-	57	20	80	90	20	-	-	80 ～ 150	40 ～ 100	-	50 ～ 200	60 ～ 180	-	75 ～ 150	26 ～ 150	-	85	150	-	100 ～ 150	-
Single Product/Set Classification	Single Item	Single Item	Single Item	Single Item	Single Item	Set Product	Single Item	Single Item	Single Item	Single Item	Single Item	Single Item	Single Item	Set Product	Single Item	Single Item	Single Item	Single Item	Set Product	Single Item	-	Single Item	Set Product	Single Item	Single Item	Single Item	Single Item	Single Item	Single Item	Single Item	Set Product	Set Product	Single Item	Set Product	Single Item	Set Product	Set Product	Single Item	Set Product	Single Item / Set Product	Single Item	Single Item	Set Product	Single Item	Set Product
Shaft type	Round	-	Round	Round	Round	Round	Round	Round	Round	Round	Square	Round	Round	Round	Round	Round	Round	Round	-	-	-	Round	Round	-	Round	Round	Round	Square	Round	-	Round	Round	Round	Round	Square	Round	Square	Round	Round	Square	Round	Round	-	Round	Round
Magnet	NA	-	Available	NA	Available	NA	NA	NA	NA	NA	Available	NA	Available	NA	Available	NA	Available	-	-	-	-	NA	NA	-	NA	NA	NA	NA	NA	-	NA	NA	NA	NA	NA	NA	NA	Available	Available	NA	NA	Available	NA	NA	NA
Shaft through	NA	-	NA	NA	Available	-	NA	NA	NA	-	-	NA	NA	NA	NA	NA	NA	-	-	-	-	Available	NA	-	-	NA	NA	NA	NA	-	NA	Available	NA	NA	NA	NA	-	Available	Available	-	NA	NA	-	NA	NA
Bolster	NA	-	NA	NA	NA	-	NA	NA	NA	-	-	NA	NA	NA	NA	NA	NA	-	-	-	-	NA	NA	-	-	NA	NA	NA	NA	-	NA	Included	NA	NA	NA	NA	-	NA	Included / NA	-	NA	NA	-	NA	NA
Grip Type	Rubber	-	Resin	Resin	Rubber	Rubber	Rubber	Resin	Resin	Resin	Rubber	Resin	Rubber	Resin	Resin	Rubber	Resin	Rubber	-	-	-	Wooden handle	Stainless Steel	-	Rubber	Resin	Rubber	Resin	Resin	Stainless Steel	Resin	Rubber	Rubber	Resin	Resin	Resin	Resin	Rubber	Resin	Rubber	Resin	Resin / Rubber	Resin	Rubber	Resin
Tip size / flathead (-) blade thickness (mm) B2	-	-	0.9 ～ 1.1	0.5	0.9 ～ 1.1	0.4 ～ 0.9	0.35 ～ 0.8	-	-	-	-	0.3 ～ 0.8	0.75 ～ 1.1	-	0.4 ～ 0.5	-	-	-	-	-	-	-	0.8 ～ 1.1	-	0.4 ～ 0.9	0.4	0.4 ～ 0.5	-	-	-	-	-	-	-	-	0.5 ～ 1.6	0.6 ～ 1.2	0.75 ～ 1.1	0.7 ～ 1.2	-	1.6	-	-	-	-
(Box/Hex/Ball-Point) Width Across Flats (mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	2.5 ～ 5	-	-	-	-	-	0.71 ～ 2	1.27 ～ 10	-	2.5 ～ 6	-	-	1.5 ～ 10	-	-	-	-	-
(Box/Hex/Ball-Point) Width Across Flats (inch)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

BrandNhãn hiệu
Product SeriesDòng sản phẩm

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare On Sale Till 31/03/2025
BrandNhãn hiệu	HOZAN	HOZAN	VESSEL	HOZAN	VESSEL	HOZAN	HOZAN	ENGINEER	ANEX	ANEX	ANEX	PB SWISS TOOLS	KTC(KYOTO TOOL)	VESSEL	VESSEL	ENGINEER	TRUSCO NAKAYAMA	SMATO	VESSEL	FUJIYA	ESCO	KTC(KYOTO TOOL)	TONE	HOZAN	HOZAN	ENGINEER	ENGINEER	ENGINEER	ANEX	ANEX	TRUSCO NAKAYAMA	WERA	WERA	EIGHT TOOL	PB SWISS TOOLS	PB SWISS TOOLS	PB SWISS TOOLS	KTC(KYOTO TOOL)	KTC(KYOTO TOOL)	KTC(KYOTO TOOL)	VESSEL	VESSEL	VESSEL	ANEX	TRUSCO NAKAYAMA
Product SeriesDòng sản phẩm	Cross-Head Screwdriver Tip Size No. 00 to 2	Pin Vise K-501	Standard Screwdriver No. 900, MEGADORA	Adjustable Driver D-29-100	Super Cushion Tang-Thru Screwdriver No. 730	Interchangeable Screwdriver Set D-44	Slotted screwdriver D-630 – D-655	Electroscopic Screwdriver DKD-01/DKD-02	Precision Screwdriver (3450)	Ultra-Stubby Mini Switchable Screwdriver	Quick Ball 60 Ratchet Screwdriver (Magnetic)	Longnose Screwdriver	Soft screwdriver (with magnet)	Micro Screwdrivers (Set of 3)【1-3 Pieces Per Package】	Megadora Thin-handle Screwdriver No.910	Screwdriver for Precision Special Screws DAP-01/DAP-02	Anti-falling Electric Work Screwdriver (Magnetic Tip)	Precision Driver (SP-2.5, SP-3 Series)	Torsion Bit【1-10 Pieces Per Package】	Screwdriver, Electric Test Driver (-) 100-380V FKD-01	[6 Pcs] (+)(-) Hammerhead Screwdriver (With Handle-Side Hexagonal Shaft) EA560E-600	Cross-Head Through Type Screwdriver With Wooden Handle	SUS Screwdriver Set SD8	Pin Vise K-502	Interchangeable Screwdrivers D-52, D-54, D-58	LED Electrical Screwdriver DKD-03	Mini Soft Screw Driver DG-21 – 24	Hex Driver DH	Special Precision Screwdriver	Screwdriver, Pin Vise	Screwdriver Set with Voltage Detector	Chisel Driver Set (Penetrating Type)	Micro Screwdriver	Hex rod type screwdriver for professionals	Ball point hex screwdriver 206S series	Screwdriver Set with Holder	Ratchet Driver Set 8510R-100SET【21 Pieces Per Package】	Soft screwdriver (penetrating type with magnet)	Resin handle screwdriver set (Penetration, magnet included)【1-8 Pieces Per Package】	Ratchet driver DBR	5700BD Cordless Screwdriver	NO.220 Ball Grip Screwdriver +3	NO. TD-80 T-Type Ratchet Driver Set【5 Pieces Per Package】	Screwdriver with Anti-Drop Ring	Screwdriver Set, TRD-S

Loading...Tải…