SANDVIK Holding Tools for O.D. Tuning（Page3）

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Turning, Shank Tool Bit, CoroTurn 107 Screw Clamp, SDJCR/L-S

  SANDVIK

  For internal and external turning of slender partsHighly repeatable insert exchange improves productivity and achieves high quality

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Pozidriv	Left-hand	Outer Diameter / Profiling	Clamp-on	8	8

  From: 3,339,521 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Turning, Shank Tool Bit, CoroTurn 107 Screw Clamp, SDNCN-S

  SANDVIK

  For internal and external turning of slender partsHighly repeatable insert exchange improves productivity and achieves high quality

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Pozidriv	No-hand	Outer Diameter / Profiling / Post-Grinding	Clamp-on	-	-

  From: 3,339,521 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CCBNR/L -4

  SANDVIK

  Stable clamping for both non-hole inserts and inserts with dimple holes

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	-	Right-hand / Left-hand	Outer Diameter	Clamp-on	32	25

  From: 5,519,688 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer-Diameter Turning, Shank Tool Bit For Ceramic Inserts, CCLNR/L -4

  SANDVIK

  Stable clamping for both non-hole inserts and inserts with dimple holes

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	-	Right-hand / Left-hand	Outer Diameter / End Face / Chamfer	Clamp-on	32	25 ～ 32

  From: 5,519,688 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CDJNR/L -4

  SANDVIK

  Stable clamping for both non-hole inserts and inserts with dimple holes

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	-	Right-hand / Left-hand	Outer Diameter / Profiling / Chamfer	Clamp-on	32	25 ～ 32

  From: 5,451,962 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, DSDNN -2

  SANDVIK

  Stable clamping for both non-hole inserts and inserts with dimple holes

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	-	No-hand	Outer Diameter / Post-Grinding	Cable clamp	-	25

  From: 5,883,970 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, DSSNR/L -2

  SANDVIK

  Stable clamping for both non-hole inserts and inserts with dimple holes

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	-	Right-hand / Left-hand	Outer Diameter / End Face / Profiling / Chamfer	Cable clamp	-	25

  From: 5,519,688 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CSBNR/L -4

  SANDVIK

  Stable clamping for both non-hole inserts and inserts with dimple holes

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	-	Right-hand / Left-hand	Outer Diameter	Clamp-on	-	25

  From: 5,519,688 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CSDNN -4

  SANDVIK

  Stable clamping for both non-hole inserts and inserts with dimple holes

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	-	No-hand	Outer Diameter	Clamp-on	32	25

  From: 5,451,962 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CSKNR/L -4

  SANDVIK

  Stable clamping for both non-hole inserts and inserts with dimple holes

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	-	Right-hand / Left-hand	Outer Diameter / End Face / Profiling / Chamfer	Clamp-on	-	25

  From: 5,519,688 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CSRNR/L -4

  SANDVIK

  Stable clamping for both non-hole inserts and inserts with dimple holes

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	-	Right-hand / Left-hand	Outer Diameter	Clamp-on	32	25

  From: 5,519,688 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CSSNR/L -4

  SANDVIK

  Stable clamping for both non-hole inserts and inserts with dimple holes

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	-	Right-hand / Left-hand	Outer Diameter / End Face / Profiling / Chamfer	Clamp-on	32	25

  From: 5,451,962 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Turning - Tool Bit For Negative Inserts, CoroTurn HP Cutting Head, C-PDUNR/L-HP

  SANDVIK

  Excellent chip control and process stability for best part qualityAccurate high-precision coolant supply controls chip control and provides stable machining

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Negative	Right-hand / Left-hand	Outer Diameter	Pin Lock	-	-

  From: 17,567,820 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Turning - Tool Bit For Negative Inserts, CoroTurn HP Cutting Head, T-Max P Lever Clamp, High Pressure Coolant Specification, C-PDJNR/L-15HP

  SANDVIK

  Sandvik Outer Diameter Holder Outer Diameter/Negative/Chip Bite CoroTurn HP Cutting Head C-PDJNR/L-15HP

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Negative	Right-hand / Left-hand	Outer Diameter / Profiling / Chamfer	Pin Lock	-	-

  From: 12,668,141 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sandvik, T-Max P, Cutting Unit, Turning, C-PCLNR/L-HP

  SANDVIK

  Excellent chip control and process stability for best part qualityAccurate high-precision coolant supply controls chip control and provides stable machining

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Negative	Right-hand / Left-hand	Outer Diameter / End Face / Chamfer	Pin Lock	-	-

  From: 14,107,208 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sandvik, T-Max P, Cutting Unit, Turning, C-PCRNR/L-HP

  SANDVIK

  Excellent chip control and process stability for best part qualityAccurate high-precision coolant supply controls chip control and provides stable machining

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Negative	Right-hand / Left-hand	Outer Diameter	Pin Lock	-	-

  From: 16,197,281 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroTurn, Outer Diameter Turning Negative Inserts, High Pressure Coolant Specification, C-PSKNR/L/-PSRNL/R-HP

  SANDVIK

  Excellent chip control and process stability for best part qualityAccurate high-precision coolant supply controls chip control and provides stable machining

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	Negative	Right-hand / Left-hand	Outer Diameter / End Face	Pin Lock	-	-

  From: 16,197,281 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sandvik, T-Max P, Cutting Unit, Turning, DDHNR/L

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Negative	Right-hand / Left-hand	Outer Diameter / Profiling	Cable clamp	-	-

  From: 8,453,730 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sandvik, T-Max P, Cutting Unit, Turning, DDJNR/L

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Negative	Right-hand / Left-hand	Outer Diameter / Profiling	Cable clamp	-	-

  From: 8,453,730 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sandvik, T-Max P, Cutting Unit, Turning, DDNNN

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Negative	No-hand	Outer Diameter / Chamfer / Post-Grinding	Cable clamp	-	-

  From: 8,198,528 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Head, CoroTurn RC Double Clamp, DDUNR/L

  SANDVIK

  Sandvik Outer Diameter Holder Outer Diameter/Negative/Chip Bite Coromant Capto Cutting Head C-DDUNR/L

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Negative	Right-hand / Left-hand	End Face	Cable clamp	-	-

  From: 6,975,588 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sandvik, T-Max P, Cutting Unit, Turning, DRSNR/L

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  R (Circular)	Negative	Right-hand / Left-hand	Outer Diameter / End Face / Profiling	Cable clamp	-	-

  From: 8,453,730 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sandvik, T-Max P, Cutting Unit, Turning, DSDNN

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	Negative	No-hand	Outer Diameter / Post-Grinding	Cable clamp	-	-

  From: 8,453,730 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sandvik, T-Max P, Cutting Unit, Turning, DSKNR/L

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	Negative	Right-hand / Left-hand	Outer Diameter / End Face	Cable clamp	-	-

  From: 7,915,072 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sandvik, T-Max P, Cutting Unit, Turning, DSSNR/L

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	Negative	Right-hand / Left-hand	Outer Diameter / End Face / Profiling / Chamfer	Cable clamp	-	-

  From: 7,817,848 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sandvik, T-Max P, Cutting Unit, Turning, DVJNR/L

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	Negative	Right-hand / Left-hand	Outer Diameter / Profiling / Chamfer	Cable clamp	-	-

  From: 8,453,730 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sandvik, T-Max P, Cutting Unit, Turning, DVVNN

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  V (35° Diamond-Shaped)	Negative	No-hand	Outer Diameter / Profiling / Post-Grinding	Cable clamp	-	-

  From: 8,453,730 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sandvik, T-Max P, Cutting Unit, Turning, DWLNR/L

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  W (Hexagonal Type)	Negative	Right-hand / Left-hand	Outer Diameter / End Face	Cable clamp	-	-

  From: 7,728,776 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Unit, PSKNR/L

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	Negative	Right-hand / Left-hand	End Face	Pin Lock	-	-

  From: 10,783,648 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Unit, PSRNR/L

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	Negative	Right-hand / Left-hand	Outer Diameter	Pin Lock	-	-

  From: 8,803,333 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sandvik, T-Max P, Cutting Unit, Turning, MWLNR/L

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  W (Hexagonal Type)	Negative	Right-hand / Left-hand	Outer Diameter / End Face	Double Clamp	-	-

  From: 7,091,463 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sandvik, T-Max P, Cutting Unit, Turning, PCLNR/L

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Negative	Right-hand / Left-hand	Outer Diameter / End Face / Chamfer	Pin Lock	-	-

  From: 7,315,865 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sandvik, T-Max P, Cutting Unit, Turning, PCRNR/L

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Negative	Right-hand / Left-hand	Outer Diameter	Pin Lock	-	-

  From: 8,803,333 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sandvik, T-Max P, Cutting Unit, Turning, PDJNR/L

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Negative	Right-hand / Left-hand	Outer Diameter / Profiling / Chamfer	Pin Lock	-	-

  From: 9,698,651 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Coromant Capto, Outer Diameter Turning Negative Inserts, Cutting Unit, C-PRDCN-25 A

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  R (Circular)	Negative	No-hand	Outer Diameter / Profiling	Pin Lock	-	-

  From: 10,095,240 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Coromant Capto, Outer Diameter Turning Negative Inserts, Cutting Unit, C-PSDNN-50/60/80

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	Negative	No-hand	Outer Diameter	Pin Lock	-	-

  From: 8,453,730 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sandvik, T-Max P, Cutting Unit, Turning, PSSNR/L

  SANDVIK

  Coromant Capto is a unique coupling with a unique polygonal shapeThe quick change of the lathe greatly contributes to the improvement of the user's productivity.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	Negative	Right-hand / Left-hand	Outer Diameter / End Face / Profiling / Chamfer	Pin Lock	-	-

  From: 7,915,072 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Turning - Tool Bit For Negative Inserts, Shank Tool Bit, CoroTurn RC Double Clamp, DCBNR/L

  SANDVIK

  Outer Dia Turning, Negative[Application]Outer Diameter[Specification]Applicable Tip Shape: C (80° Diamond-Shape)Clamp Shape: Cable clampSelfishly: Left-handApplicable Tip Clearance Angle Type: NegativeShank height(mm): 32Shank width(mm): 32Lead Angle(°): 15Cutting Angle(°): 75Clearance angle(°): 0Function Width(mm): 27Function Height(mm): 32Shank width(B): 32mmShank height(H): 32mm[Material]Steel

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Negative	Right-hand	Outer Diameter	Cable clamp	20 ～ 32	20 ～ 32

  From: 3,691,105 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Turning - Tool Bit For Negative Inserts, Shank Tool Bit, CoroTurn RC Double Clamp, DCLNR/L

  SANDVIK

  Sandvik External Holder External Turning - Negative Insert Bit Shank Bit CoroTurn RC Double Clamp DCLNR/L

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  C (80° Diamond-Shape)	Negative	Right-hand / Left-hand	Outer Diameter / End Face / Chamfer	Cable clamp	25 ～ 32	25

  From: 2,777,823 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DDJNR/L

  SANDVIK

  [Features]A high-rigidity double clamp holder for turning. Extremely easy to handle. Swap out inserts and shims using just the one wrench. Inserts are easy to swap out, even from the backside of the holder. A wide variety of insert types can be mounted by swapping out the clamp set and shims. Supports outer-diameter turning (bore-cutting) and the use of negative inserts. Supports everything from roughing through to finishing.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Negative	Right-hand / Left-hand	Outer Diameter / Profiling / Chamfer	Cable clamp	25 ～ 32	25 ～ 32

  From: 3,896,686 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DDNNN

  SANDVIK

  [Features]A high-rigidity double clamp holder for turning. Extremely easy to handle. Swap out inserts and shims using just the one wrench. Inserts are easy to swap out, even from the backside of the holder. A wide variety of insert types can be mounted by swapping out the clamp set and shims. Supports outer-diameter turning (bore-cutting) and the use of negative inserts. Supports everything from roughing through to finishing.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  D (55° Diamond-Shape)	Negative	No-hand	Outer Diameter / Chamfer / Post-Grinding	Cable clamp	32	25

  From: 4,756,063 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DRSNR/L

  SANDVIK

  [Features]A high-rigidity double clamp holder for turning. Extremely easy to handle. Swap out inserts and shims using just the one wrench. Inserts are easy to swap out, even from the backside of the holder. A wide variety of insert types can be mounted by swapping out the clamp set and shims. Supports outer-diameter turning (bore-cutting) and the use of negative inserts. Supports everything from roughing through to finishing.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  R (Circular)	Negative	Right-hand / Left-hand	Outer Diameter / End Face / Profiling / Chamfer	Cable clamp	25 ～ 40	25 ～ 40

  From: 3,896,686 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DSBNR/L

  SANDVIK

  [Features]A high-rigidity double clamp holder for turning. Extremely easy to handle. Swap out inserts and shims using just the one wrench. Inserts are easy to swap out, even from the backside of the holder. A wide variety of insert types can be mounted by swapping out the clamp set and shims. Supports outer-diameter turning (bore-cutting) and the use of negative inserts. Supports everything from roughing through to finishing.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  S (Rectangular)	Negative	Right-hand / Left-hand	Outer Diameter	Cable clamp	20 ～ 50	20 ～ 50

  From: 3,447,280 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DTFNR/L

  SANDVIK

  [Features]A high-rigidity double clamp holder for turning. Extremely easy to handle. Swap out inserts and shims using just the one wrench. Inserts are easy to swap out, even from the backside of the holder. A wide variety of insert types can be mounted by swapping out the clamp set and shims. Supports outer-diameter turning (bore-cutting) and the use of negative inserts. Supports everything from roughing through to finishing.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	Negative	Right-hand	End Face	Cable clamp	20 ～ 32	20 ～ 32

  From: 3,691,105 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DTGNR/L

  SANDVIK

  [Features]A high-rigidity double clamp holder for turning. Extremely easy to handle. Swap out inserts and shims using just the one wrench. Inserts are easy to swap out, even from the backside of the holder. A wide variety of insert types can be mounted by swapping out the clamp set and shims. Supports outer-diameter turning (bore-cutting) and the use of negative inserts. Supports everything from roughing through to finishing.

  Applicable Tip Shape	Applicable Chip Clearance Angle	Selfishly	Application	Clamp Shape	Shank height(mm)	Shank width(mm)
  T (Triangle)	Negative	Left-hand	Outer Diameter	Cable clamp	20 ～ 25	20 ～ 25

  From: 3,093,776 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
Applicable Tip Shape
Applicable Chip Clearance Angle
Selfishly
Application
Clamp Shape
Shank height(mm)
Shank width(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK
Product SeriesDòng sản phẩm	Outer Diameter Turning, Shank Tool Bit, CoroTurn 107 Screw Clamp, SDJCR/L-S	Outer Diameter Turning, Shank Tool Bit, CoroTurn 107 Screw Clamp, SDNCN-S	Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CCBNR/L -4	Outer-Diameter Turning, Shank Tool Bit For Ceramic Inserts, CCLNR/L -4	Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CDJNR/L -4	Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, DSDNN -2	Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, DSSNR/L -2	Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CSBNR/L -4	Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CSDNN -4	Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CSKNR/L -4	Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CSRNR/L -4	Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CSSNR/L -4	Outer Diameter Turning - Tool Bit For Negative Inserts, CoroTurn HP Cutting Head, C-PDUNR/L-HP	Outer Diameter Turning - Tool Bit For Negative Inserts, CoroTurn HP Cutting Head, T-Max P Lever Clamp, High Pressure Coolant Specification, C-PDJNR/L-15HP	Sandvik, T-Max P, Cutting Unit, Turning, C-PCLNR/L-HP	Sandvik, T-Max P, Cutting Unit, Turning, C-PCRNR/L-HP	CoroTurn, Outer Diameter Turning Negative Inserts, High Pressure Coolant Specification, C-PSKNR/L/-PSRNL/R-HP	Sandvik, T-Max P, Cutting Unit, Turning, DDHNR/L	Sandvik, T-Max P, Cutting Unit, Turning, DDJNR/L	Sandvik, T-Max P, Cutting Unit, Turning, DDNNN	Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Head, CoroTurn RC Double Clamp, DDUNR/L	Sandvik, T-Max P, Cutting Unit, Turning, DRSNR/L	Sandvik, T-Max P, Cutting Unit, Turning, DSDNN	Sandvik, T-Max P, Cutting Unit, Turning, DSKNR/L	Sandvik, T-Max P, Cutting Unit, Turning, DSSNR/L	Sandvik, T-Max P, Cutting Unit, Turning, DVJNR/L	Sandvik, T-Max P, Cutting Unit, Turning, DVVNN	Sandvik, T-Max P, Cutting Unit, Turning, DWLNR/L	Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Unit, PSKNR/L	Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Unit, PSRNR/L	Sandvik, T-Max P, Cutting Unit, Turning, MWLNR/L	Sandvik, T-Max P, Cutting Unit, Turning, PCLNR/L	Sandvik, T-Max P, Cutting Unit, Turning, PCRNR/L	Sandvik, T-Max P, Cutting Unit, Turning, PDJNR/L	Coromant Capto, Outer Diameter Turning Negative Inserts, Cutting Unit, C-PRDCN-25 A	Coromant Capto, Outer Diameter Turning Negative Inserts, Cutting Unit, C-PSDNN-50/60/80	Sandvik, T-Max P, Cutting Unit, Turning, PSSNR/L	Outer Diameter Turning - Tool Bit For Negative Inserts, Shank Tool Bit, CoroTurn RC Double Clamp, DCBNR/L	Outer Diameter Turning - Tool Bit For Negative Inserts, Shank Tool Bit, CoroTurn RC Double Clamp, DCLNR/L	Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DDJNR/L	Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DDNNN	Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DRSNR/L	Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DSBNR/L	Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DTFNR/L	Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DTGNR/L
From	3,339,521 VND	3,339,521 VND	5,519,688 VND	5,519,688 VND-	5,451,962 VND-	5,883,970 VND	5,519,688 VND	5,519,688 VND	5,451,962 VND-	5,519,688 VND	5,519,688 VND-	5,451,962 VND-	17,567,820 VND	12,668,141 VND-	14,107,208 VND-	16,197,281 VND	16,197,281 VND	8,453,730 VND-	8,453,730 VND-	8,198,528 VND-	6,975,588 VND-	8,453,730 VND-	8,453,730 VND-	7,915,072 VND-	7,817,848 VND-	8,453,730 VND-	8,453,730 VND-	7,728,776 VND-	10,783,648 VND-	8,803,333 VND-	7,091,463 VND-	7,315,865 VND-	8,803,333 VND-	9,698,651 VND-	10,095,240 VND-	8,453,730 VND-	7,915,072 VND-	3,691,105 VND-	2,777,823 VND-	3,896,686 VND-	4,756,063 VND	3,896,686 VND-	3,447,280 VND-	3,691,105 VND-	3,093,776 VND-
Days to ShipSố ngày giao hàng	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	9 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	6 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	9 Day(s)	6 Day(s) or more	9 Day(s)	9 Day(s)	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	8 Day(s) or more
Applicable Tip Shape	D (55° Diamond-Shape)	D (55° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	D (55° Diamond-Shape)	S (Rectangular)	S (Rectangular)	S (Rectangular)	S (Rectangular)	S (Rectangular)	S (Rectangular)	S (Rectangular)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	S (Rectangular)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	R (Circular)	S (Rectangular)	S (Rectangular)	S (Rectangular)	V (35° Diamond-Shaped)	V (35° Diamond-Shaped)	W (Hexagonal Type)	S (Rectangular)	S (Rectangular)	W (Hexagonal Type)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	D (55° Diamond-Shape)	R (Circular)	S (Rectangular)	S (Rectangular)	C (80° Diamond-Shape)	C (80° Diamond-Shape)	D (55° Diamond-Shape)	D (55° Diamond-Shape)	R (Circular)	S (Rectangular)	T (Triangle)	T (Triangle)
Applicable Chip Clearance Angle	Pozidriv	Pozidriv	-	-	-	-	-	-	-	-	-	-	Negative	Negative	Negative	Negative	Negative	Negative	Negative	Negative	Negative	Negative	Negative	Negative	Negative	Negative	Negative	Negative	Negative	Negative	Negative	Negative	Negative	Negative	Negative	Negative	Negative	Negative	Negative	Negative	Negative	Negative	Negative	Negative	Negative
Selfishly	Left-hand	No-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	No-hand	Right-hand / Left-hand	Right-hand / Left-hand	No-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	No-hand	Right-hand / Left-hand	Right-hand / Left-hand	No-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	No-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	No-hand	No-hand	Right-hand / Left-hand	Right-hand	Right-hand / Left-hand	Right-hand / Left-hand	No-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand	Left-hand
Application	Outer Diameter / Profiling	Outer Diameter / Profiling / Post-Grinding	Outer Diameter	Outer Diameter / End Face / Chamfer	Outer Diameter / Profiling / Chamfer	Outer Diameter / Post-Grinding	Outer Diameter / End Face / Profiling / Chamfer	Outer Diameter	Outer Diameter	Outer Diameter / End Face / Profiling / Chamfer	Outer Diameter	Outer Diameter / End Face / Profiling / Chamfer	Outer Diameter	Outer Diameter / Profiling / Chamfer	Outer Diameter / End Face / Chamfer	Outer Diameter	Outer Diameter / End Face	Outer Diameter / Profiling	Outer Diameter / Profiling	Outer Diameter / Chamfer / Post-Grinding	End Face	Outer Diameter / End Face / Profiling	Outer Diameter / Post-Grinding	Outer Diameter / End Face	Outer Diameter / End Face / Profiling / Chamfer	Outer Diameter / Profiling / Chamfer	Outer Diameter / Profiling / Post-Grinding	Outer Diameter / End Face	End Face	Outer Diameter	Outer Diameter / End Face	Outer Diameter / End Face / Chamfer	Outer Diameter	Outer Diameter / Profiling / Chamfer	Outer Diameter / Profiling	Outer Diameter	Outer Diameter / End Face / Profiling / Chamfer	Outer Diameter	Outer Diameter / End Face / Chamfer	Outer Diameter / Profiling / Chamfer	Outer Diameter / Chamfer / Post-Grinding	Outer Diameter / End Face / Profiling / Chamfer	Outer Diameter	End Face	Outer Diameter
Clamp Shape	Clamp-on	Clamp-on	Clamp-on	Clamp-on	Clamp-on	Cable clamp	Cable clamp	Clamp-on	Clamp-on	Clamp-on	Clamp-on	Clamp-on	Pin Lock	Pin Lock	Pin Lock	Pin Lock	Pin Lock	Cable clamp	Cable clamp	Cable clamp	Cable clamp	Cable clamp	Cable clamp	Cable clamp	Cable clamp	Cable clamp	Cable clamp	Cable clamp	Pin Lock	Pin Lock	Double Clamp	Pin Lock	Pin Lock	Pin Lock	Pin Lock	Pin Lock	Pin Lock	Cable clamp	Cable clamp	Cable clamp	Cable clamp	Cable clamp	Cable clamp	Cable clamp	Cable clamp
Shank height(mm)	8	-	32	32	32	-	-	-	32	-	32	32	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	20 ～ 32	25 ～ 32	25 ～ 32	32	25 ～ 40	20 ～ 50	20 ～ 32	20 ～ 25
Shank width(mm)	8	-	25	25 ～ 32	25 ～ 32	25	25	25	25	25	25	25	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	20 ～ 32	25	25 ～ 32	25	25 ～ 40	20 ～ 50	20 ～ 32	20 ～ 25

BrandNhãn hiệu
Product SeriesDòng sản phẩm

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK
Product SeriesDòng sản phẩm	Outer Diameter Turning, Shank Tool Bit, CoroTurn 107 Screw Clamp, SDJCR/L-S	Outer Diameter Turning, Shank Tool Bit, CoroTurn 107 Screw Clamp, SDNCN-S	Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CCBNR/L -4	Outer-Diameter Turning, Shank Tool Bit For Ceramic Inserts, CCLNR/L -4	Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CDJNR/L -4	Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, DSDNN -2	Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, DSSNR/L -2	Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CSBNR/L -4	Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CSDNN -4	Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CSKNR/L -4	Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CSRNR/L -4	Outer Diameter Turning - Tool Bit For Ceramic Inserts, Shank Tool Bit, CSSNR/L -4	Outer Diameter Turning - Tool Bit For Negative Inserts, CoroTurn HP Cutting Head, C-PDUNR/L-HP	Outer Diameter Turning - Tool Bit For Negative Inserts, CoroTurn HP Cutting Head, T-Max P Lever Clamp, High Pressure Coolant Specification, C-PDJNR/L-15HP	Sandvik, T-Max P, Cutting Unit, Turning, C-PCLNR/L-HP	Sandvik, T-Max P, Cutting Unit, Turning, C-PCRNR/L-HP	CoroTurn, Outer Diameter Turning Negative Inserts, High Pressure Coolant Specification, C-PSKNR/L/-PSRNL/R-HP	Sandvik, T-Max P, Cutting Unit, Turning, DDHNR/L	Sandvik, T-Max P, Cutting Unit, Turning, DDJNR/L	Sandvik, T-Max P, Cutting Unit, Turning, DDNNN	Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Head, CoroTurn RC Double Clamp, DDUNR/L	Sandvik, T-Max P, Cutting Unit, Turning, DRSNR/L	Sandvik, T-Max P, Cutting Unit, Turning, DSDNN	Sandvik, T-Max P, Cutting Unit, Turning, DSKNR/L	Sandvik, T-Max P, Cutting Unit, Turning, DSSNR/L	Sandvik, T-Max P, Cutting Unit, Turning, DVJNR/L	Sandvik, T-Max P, Cutting Unit, Turning, DVVNN	Sandvik, T-Max P, Cutting Unit, Turning, DWLNR/L	Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Unit, PSKNR/L	Outer Diameter Turning - Tool Bit For Negative Inserts, Coromant Capto Cutting Unit, PSRNR/L	Sandvik, T-Max P, Cutting Unit, Turning, MWLNR/L	Sandvik, T-Max P, Cutting Unit, Turning, PCLNR/L	Sandvik, T-Max P, Cutting Unit, Turning, PCRNR/L	Sandvik, T-Max P, Cutting Unit, Turning, PDJNR/L	Coromant Capto, Outer Diameter Turning Negative Inserts, Cutting Unit, C-PRDCN-25 A	Coromant Capto, Outer Diameter Turning Negative Inserts, Cutting Unit, C-PSDNN-50/60/80	Sandvik, T-Max P, Cutting Unit, Turning, PSSNR/L	Outer Diameter Turning - Tool Bit For Negative Inserts, Shank Tool Bit, CoroTurn RC Double Clamp, DCBNR/L	Outer Diameter Turning - Tool Bit For Negative Inserts, Shank Tool Bit, CoroTurn RC Double Clamp, DCLNR/L	Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DDJNR/L	Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DDNNN	Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DRSNR/L	Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DSBNR/L	Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DTFNR/L	Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DTGNR/L

Loading...Tải…