Grooving / Cutting Off Holders（Page2）

• You can add up to 6 items per a category to the compare list. Compare

  

  Large Inner Diameter Deep Grooved Holder [For GIA Tip] Compatible Chip

  KYOCERA

  Clamp-on type large inner diameter deep grooving holder.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	No-hand	-	-	-

  From: 322,256 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Small Bore End Surface Slotting Series, Model VNFG (System Bar)

  KYOCERA

  The MIN dimension (0) for the end face groove outer diameter øD indicates the possible expansion to the center following machining of the initial groove in the range MIN-MAX.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand	-	-	-

  From: 889,996 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Micro Groove Cutter (Twin Bar) Model S..-STW (Circular Shank for Side Cutting Bit)

  KYOCERA

  · T dimension: Shows the distance from holder surface to cutting edge. The actual possible grooving depth is the insert B dimension.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Left-hand	-	-	-

  From: 4,560,910 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Multi-Functional / End Face Grooving Holder Compatible Tip

  KYOCERA

  Takinor multi-functional / end face grooving holder.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	No-hand	-	-	-

  From: 324,188 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max Q-Cut SL (Type 151.3) Blade For Internal Diameter Grooving And Profiling 570-R/L

  SANDVIK

  Sandvik Grooving/cutting off holder T-Max Q-Cut SL (Type 151.3) Internal grooving, profiling blade 570-R/L

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Inner Diameter Grooving / Profiling	2 ～ 8	8 ～ 13	Right-hand / Left-hand	-	1 Corner	-

  From: 5,896,544 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroTurn SL T-Max Q-Cut SL Blade For Grooving And Cut-Off 570-R/L151.21

  SANDVIK

  CoroTurnSL is a modular system of adapters and cutting heads that allows you to build customized tools for a wide variety of turning operations with a minimal number of items

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Cutting off	2	20 ～ 32	Right-hand / Left-hand	-	1 Corner	-

  From: 4,016,477 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Grooved End Face Holder (for GVF Chip) GFV Type

  KYOCERA

  A clamp-on holder for face grooving.[Shank Material]Steel

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Edge surface grooving	-	4.6 ～ 8.1	Right-hand / Left-hand	50（∞） ～ 250（∞）	-	-

  From: 4,788,800 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Grooved End Face Holder Main Body (for GVF Chip)

  KYOCERA

  A clamp-on holder for face grooving.Modular (blade).

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Edge surface grooving	-	-	Right-hand / Left-hand	-	-	-

  From: 4,560,910 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Holder For Grooving GTV

  NGK SPARK PLUG

  Grooving holder for outer diameter grooving specifications.Maximum groove depth is 11 mm.You can choose a cutting direction, either left hand or right hand, from a part number.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving	3.00 to 3.50 ～ 8.00 to 9.00	11	Right-hand / Left-hand	-	-	-

  From: 3,106,688 VND
  Days to Ship: Số ngày giao hàng: 14 Day(s) or more

  14 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Holder For Cut-Off, CTPW

  NGK SPARK PLUG

  [Features]A holder for parting-off.[Cutting Direction]You can choose from 2 types, left-hand or right-hand.[Applications]Suitable for parting-off machining.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Cutting off	-	-	Right-hand / Left-hand	20	-	-

  From: 4,321,845 VND
  Days to Ship: Số ngày giao hàng: 14 Day(s) or more

  14 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Holder For Grooving SCRUM DUO (Shank: 10 to 16) GTWPR/L-1

  NGK SPARK PLUG

  [Features]· Attained excellent stability and long life for grooving and side-turning· Excellent chip processing and glossy groove bottom surface in side-turning· Favorable chip processing and beautiful groove bottom surface in grooving· For automatic lathe

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving	3 ～ 6	7 ～ 9	Right-hand / Left-hand	ø42	-	-

  From: 4,371,648 VND
  Days to Ship: Số ngày giao hàng: 14 Day(s) or more

  14 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Grooved Bit (for outer diameter L type lateral groove) GNDLS Type

  SUMITOMO ELECTRIC HARDMETAL

  Its outstanding cutting chip handling performance and chattering resistance ensure machining.For outer diameter deep grooving and parting-off.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Horizontal feeding	2 ～ 6	16 ～ 23	Right-hand / Left-hand	-	2 Corner	20 ～ 25

  From: 5,958,367 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Grooved Bit (multifunction outer diameter L type lateral groove) GNDMS Type

  SUMITOMO ELECTRIC HARDMETAL

  Its outstanding cutting chip handling performance and chattering resistance ensure machining.For outer diameter multi-function machining.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Horizontal feeding / Profiling	3 ～ 6	10 ～ 14	Right-hand / Left-hand	-	2 Corner	20 ～ 25

  From: 5,958,367 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  SEC-Grooved Bit (for outer diameter multi-functional groove, lateral feed, copying) GNDM Type

  SUMITOMO ELECTRIC HARDMETAL

  [Applications]It can be used for outer diameter grooving, transverse feeding, and profiling. [Features]Please use inserts for multi-functional and profiling machining when machining horizontal feeding and grooving.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Horizontal feeding / Profiling	3 ～ 6	12 ～ 18	Right-hand / Left-hand	-	2 Corner	20 ～ 25

  From: 4,761,892 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s)

  9 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  Tsukkirukun Jr STFH Type

  SUMITOMO ELECTRIC HARDMETAL

  Double the insert clamping force. Small cutting vibration.[Features]・ Steel holder・ Intermittent machining is possible・ Supports parting-off, grooving, chamfering, etc.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Cutting off	2 ～ 5	-	-	40 ～ 100	1 Corner	26 ～ 32

  From: 2,258,675 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tsukkirukun Jr STFS Type

  SUMITOMO ELECTRIC HARDMETAL

  Double the insert clamping force. Small cutting vibration.[Features]・ Steel holder・ Intermittent machining is possible・ Supports parting-off, grooving, chamfering, etc.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Cutting off	2 ～ 5	-	Right-hand / Left-hand	28 ～ 70	1 Corner	10 ～ 25

  From: 2,556,088 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Self Grip (F Cut) Blade for Plunging

  ISCAR

  [Features]F-cut type blade.[Applications]Suitable for parting-off and deep grooving.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Cutting off	1.6 ～ 3	-	No-hand	32 ～ 100	1 Corner	19 ～ 32

  From: 3,235,718 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Self-Grip (F-Cut) General-Purpose Integrated Holder for Cut-Off Processing, for CNC Lathes (Jet Cut), for Automatic Lathes

  ISCAR

  Integrated holder for parting offGeneral purpose, for CNC lathes (JETCUT), for automatic lathes

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Cutting off	1.2 ～ 1.6	-	Right-hand / Left-hand	18 ～ 26	1 Corner	8 ～ 10

  From: 4,051,666 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Self Grip (T Cut) Blade for Plunging

  ISCAR

  When using T cut, the F cut and DO GRIP are recommended.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Cutting off	4.1	-	No-hand	80	1 Corner	26

  From: 3,490,701 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Self Grip (T Cut) Blade for Plunging, Integrated Holder, for Automatic Lathe, General Purpose Type

  ISCAR

  [Applications]Used for parting and grooving steel materials.[Features]Automatic lathe type and general purpose type are available.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Cutting off	2.2/2.4 ～ 4.8/5.1	-	Right-hand / Left-hand	28 ～ 75	1 Corner	10 ～ 25

  From: 3,592,695 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tang Grip, Blade for Cutting Protrusions and Grooving

  ISCAR

  [Features]Blade for parting and groovingThis is the latest chip cutting-off tool with vertical inserts.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Cutting off	3 ～ 4	-	No-hand	75 ～ 160	1 Corner	-

  From: 3,235,718 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Do-Grip Integrated Holder for Cutting Protrusions (Screw Clamp)

  ISCAR

  Diagonal screw clamp system achieves high rigidity and retention.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Cutting off	1.0/1.5 ～ 1.4	-	Right-hand / Left-hand	18 ～ 24	1 Corner	10 ～ 20

  From: 3,082,726 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Do-Grip Integrated Holder for Cutting Protrusions

  ISCAR

  [Features]Integrated tongue grip holder for parting using a newly developed clamping method

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Cutting off / Horizontal feeding	1.0 2.0 2.2 ～ 5	-	Right-hand / Left-hand	35 ～ 76	2 Corner	10 ～ 25

  From: 4,000,670 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HELI GRIP, Outer Diameter Machining Integrated Holder

  ISCAR

  [Applications]Used for cutting off, deep grooving, turning and enlarging of outer diameters.[Features]Heli-grip holder integrated with tip.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Cutting off / Horizontal feeding	3 ～ 6	12 ～ 30	Right-hand / Left-hand	24 ～ 60	2 Corner	16 ～ 32

  From: 4,102,663 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Shallow Groove Holder [for GB/GBA Chip] KGBS Type

  KYOCERA

  A clamp-on type outer diameter shallow grooving holder.[Shank Material]Steel

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: 3,193,558 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Lathe Turning (Cutter) Bit GDMS Model

  KYOCERA

  Conventional insert mounting to new holders is not recommended.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	No-hand	-	-	-

  From: 193,970 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Lathe Turning Holder KGDS-S Model (Right Angle Type: 90°, Parting Type)

  KYOCERA

  If the holder is used as a positive tool, the holder jaw could interfere with the tool presetter.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: 4,144,221 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Lathe Turning/Cutting Holder Main Body KGDS-S Model (Right Angle Type: 90°, Parting Type)

  KYOCERA

  [Specifications]·Machining applications: grooving / parting-off; holder angle (°): 90; type: modular type (blade); compatible tip: GDM, GDMS, GDG, GDGS

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: 3,647,001 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Multi-Functional /Grooving (Cutting-Off) Chip GMGA Type

  KYOCERA

  Sharp edge specification enables 40% reduction in cutting resistance from C surface specification.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	No-hand	-	-	-

  From: 987,210 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Multi-Functional / Grooving (Cutting-Off) Chip FGG Type

  KYOCERA

  Sharp edge specification enables 40% reduction in cutting resistance from C surface specification.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: 622,661 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Lathe Turning/Cutting (Multi-Function) Bit GMM/GMN Model

  KYOCERA

  There is a limit to the groove depth that can be processed depending on the workpiece diameter.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: 237,696 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Multi-Functional / Shallow Grooving Holder (For Outer Diameter Grooving / End Grooving) KGMM Type

  KYOCERA

  A holder for the multi-function tool "TAKINOL" series.For outer diameter grooving and face grooving.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand	-	-	-

  From: 3,918,668 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Multi-Functional / Shallow Grooving Holder (For Outer Diameter Grooving And End Surface Grooving) KGMU Type (Outer Diameter Sliding Groove Holder)

  KYOCERA

  A holder for the multi-function tool "TAKINOL" series.For outer diameter relief cut grooving.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand	-	-	-

  From: 3,918,668 VND
  Days to Ship: Số ngày giao hàng: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] KGH Type

  KYOCERA

  [Features]It can be used for shallow grooving on the outer diameter and can be used for GH, GHU and GA inserts.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: 3,566,470 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] KGHS Type

  KYOCERA

  A clamp-on type outer diameter deep grooving holder.For outer diameter deep grooving.A right angle type.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: 4,063,690 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] KGA Type

  KYOCERA

  A clamp-on type outer diameter deep grooving holder.For outer diameter deep grooving.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: 3,566,470 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Aluminum Wheel Outer Diameter, KGMW Type (outer diameter, end face, profile machining)

  KYOCERA

  [Specifications]·Machining applications: outer diameter, flange, and profiling; compatible insert shape: non-ISO standard; clamp method: non-ISO standard

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: 3,918,668 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Inner Diameter Groove SIGE-WH Type Carbide Vibration Proof Bar (with Coolant Hole)

  KYOCERA

  Right-handed (R) insert and left-handed (L) insert are compatible with right-handed (R) holder and left-handed (L) holder respectively.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: 8,580,096 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Inner Diameter Groove SIGE-WH-90 Type (for Automatic Plate) Carbide Vibration Proof Bar (with Coolant Hole)

  KYOCERA

  Inner diameter grooving SIGE model for automatic lathes.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand	-	-	-

  From: 12,557,850 VND
  Days to Ship: Số ngày giao hàng: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Small Bore Slotting Holder [for GV Tip]

  KYOCERA

  Right-handed (R) insert and left-handed (L) insert are compatible with right-handed (R) holder and left-handed (L) holder respectively.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: 4,540,190 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Small Internal Grooving Inserts Compatible Inserts (For GIV Type / GIV-E Type / GIV-W Type)

  KYOCERA

  GIV model tip for small diameter grroving.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: 341,283 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Inner Diameter Shallow Groove Holder KIGBA Type

  KYOCERA

  [Specifications]·Machining applications: grooving; holder angle (°): 90; type: integrated

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: 5,431,043 VND
  Days to Ship: Số ngày giao hàng: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Large Inner Diameter Deep Grooved Holder [For GH/GHU Tip] KIGH Type

  KYOCERA

  [Specifications]·Machining applications: grooving; cutting direction: right; holder angle (°): 90; compatible insert: for GH and GHU inserts; type: integrated

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand	-	-	-

  From: 7,274,895 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Multi-Functional / Inner Diameter Grooving Holder (KIGM-V Type)

  KYOCERA

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	No-hand	-	-	-

  From: 417,416 VND
  Days to Ship: Số ngày giao hàng: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Multi-Function / Large Inner Diameter Deep Grooving Holder / Large Inner Diameter Relief Grooving Holder KIGM-8/KIGMU-8

  KYOCERA

  Takinor multi-functional large inner diameter deep grooving holder / large inner diameter undercut grooving holder.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: 11,584,130 VND
  Days to Ship: Số ngày giao hàng: 9 Day(s) or more

  9 Day(s) or more

BrandNhãn hiệu
Product SeriesDòng sản phẩm
From
Days to ShipSố ngày giao hàng
Application
Groove Width(mm)
Maximum Groove Depth(mm)
Selfishly
Maximum Machining Diameter(mm)
Number of corners for tip use
Shank height(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
BrandNhãn hiệu	KYOCERA	KYOCERA	KYOCERA	KYOCERA	SANDVIK	SANDVIK	KYOCERA	KYOCERA	NGK SPARK PLUG	NGK SPARK PLUG	NGK SPARK PLUG	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	SUMITOMO ELECTRIC HARDMETAL	ISCAR	ISCAR	ISCAR	ISCAR	ISCAR	ISCAR	ISCAR	ISCAR	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA
Product SeriesDòng sản phẩm	Large Inner Diameter Deep Grooved Holder [For GIA Tip] Compatible Chip	Small Bore End Surface Slotting Series, Model VNFG (System Bar)	Micro Groove Cutter (Twin Bar) Model S..-STW (Circular Shank for Side Cutting Bit)	Multi-Functional / End Face Grooving Holder Compatible Tip	T-Max Q-Cut SL (Type 151.3) Blade For Internal Diameter Grooving And Profiling 570-R/L	CoroTurn SL T-Max Q-Cut SL Blade For Grooving And Cut-Off 570-R/L151.21	Grooved End Face Holder (for GVF Chip) GFV Type	Grooved End Face Holder Main Body (for GVF Chip)	Holder For Grooving GTV	Holder For Cut-Off, CTPW	Holder For Grooving SCRUM DUO (Shank: 10 to 16) GTWPR/L-1	SEC-Grooved Bit (for outer diameter L type lateral groove) GNDLS Type	SEC-Grooved Bit (multifunction outer diameter L type lateral groove) GNDMS Type	SEC-Grooved Bit (for outer diameter multi-functional groove, lateral feed, copying) GNDM Type	Tsukkirukun Jr STFH Type	Tsukkirukun Jr STFS Type	Self Grip (F Cut) Blade for Plunging	Self-Grip (F-Cut) General-Purpose Integrated Holder for Cut-Off Processing, for CNC Lathes (Jet Cut), for Automatic Lathes	Self Grip (T Cut) Blade for Plunging	Self Grip (T Cut) Blade for Plunging, Integrated Holder, for Automatic Lathe, General Purpose Type	Tang Grip, Blade for Cutting Protrusions and Grooving	Do-Grip Integrated Holder for Cutting Protrusions (Screw Clamp)	Do-Grip Integrated Holder for Cutting Protrusions	HELI GRIP, Outer Diameter Machining Integrated Holder	Outer Diameter Shallow Groove Holder [for GB/GBA Chip] KGBS Type	Lathe Turning (Cutter) Bit GDMS Model	Lathe Turning Holder KGDS-S Model (Right Angle Type: 90°, Parting Type)	Lathe Turning/Cutting Holder Main Body KGDS-S Model (Right Angle Type: 90°, Parting Type)	Multi-Functional /Grooving (Cutting-Off) Chip GMGA Type	Multi-Functional / Grooving (Cutting-Off) Chip FGG Type	Lathe Turning/Cutting (Multi-Function) Bit GMM/GMN Model	Multi-Functional / Shallow Grooving Holder (For Outer Diameter Grooving / End Grooving) KGMM Type	Multi-Functional / Shallow Grooving Holder (For Outer Diameter Grooving And End Surface Grooving) KGMU Type (Outer Diameter Sliding Groove Holder)	Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] KGH Type	Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] KGHS Type	Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] KGA Type	Aluminum Wheel Outer Diameter, KGMW Type (outer diameter, end face, profile machining)	Inner Diameter Groove SIGE-WH Type Carbide Vibration Proof Bar (with Coolant Hole)	Inner Diameter Groove SIGE-WH-90 Type (for Automatic Plate) Carbide Vibration Proof Bar (with Coolant Hole)	Small Bore Slotting Holder [for GV Tip]	Small Internal Grooving Inserts Compatible Inserts (For GIV Type / GIV-E Type / GIV-W Type)	Inner Diameter Shallow Groove Holder KIGBA Type	Large Inner Diameter Deep Grooved Holder [For GH/GHU Tip] KIGH Type	Multi-Functional / Inner Diameter Grooving Holder (KIGM-V Type)	Multi-Function / Large Inner Diameter Deep Grooving Holder / Large Inner Diameter Relief Grooving Holder KIGM-8/KIGMU-8
From	322,256 VND	889,996 VND	4,560,910 VND	324,188 VND	5,896,544 VND	4,016,477 VND	4,788,800 VND	4,560,910 VND	3,106,688 VND	4,321,845 VND	4,371,648 VND	5,958,367 VND	5,958,367 VND	4,761,892 VND	2,258,675 VND	2,556,088 VND	3,235,718 VND	4,051,666 VND	3,490,701 VND	3,592,695 VND	3,235,718 VND	3,082,726 VND	4,000,670 VND	4,102,663 VND	3,193,558 VND	193,970 VND	4,144,221 VND	3,647,001 VND	987,210 VND	622,661 VND	237,696 VND	3,918,668 VND	3,918,668 VND	3,566,470 VND	4,063,690 VND	3,566,470 VND	3,918,668 VND	8,580,096 VND	12,557,850 VND	4,540,190 VND	341,283 VND	5,431,043 VND	7,274,895 VND	417,416 VND	11,584,130 VND
Days to ShipSố ngày giao hàng	7 Day(s) or more	6 Day(s) or more	8 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	7 Day(s) or more	9 Day(s) or more	14 Day(s) or more	14 Day(s) or more	14 Day(s) or more	9 Day(s)	9 Day(s)	9 Day(s)	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	8 Day(s) or more	6 Day(s) or more	8 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	9 Day(s) or more	7 Day(s) or more	10 Day(s) or more	9 Day(s) or more	9 Day(s) or more	6 Day(s) or more	9 Day(s) or more	9 Day(s) or more	7 Day(s) or more	6 Day(s) or more	9 Day(s) or more	10 Day(s) or more	10 Day(s) or more	9 Day(s) or more	10 Day(s) or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	9 Day(s) or more	6 Day(s) or more	9 Day(s) or more
Application	-	-	-	-	Inner Diameter Grooving / Profiling	Outer Diameter Grooving / Cutting off	Edge surface grooving	Edge surface grooving	Outer Diameter Grooving	Cutting off	Outer Diameter Grooving	Outer Diameter Grooving / Horizontal feeding	Outer Diameter Grooving / Horizontal feeding / Profiling	Outer Diameter Grooving / Horizontal feeding / Profiling	Cutting off	Cutting off	Outer Diameter Grooving / Cutting off	Outer Diameter Grooving / Cutting off	Outer Diameter Grooving / Cutting off	Outer Diameter Grooving / Cutting off	Outer Diameter Grooving / Cutting off	Outer Diameter Grooving / Cutting off	Outer Diameter Grooving / Cutting off / Horizontal feeding	Outer Diameter Grooving / Cutting off / Horizontal feeding	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Groove Width(mm)	-	-	-	-	2 ～ 8	2	-	-	3.00 to 3.50 ～ 8.00 to 9.00	-	3 ～ 6	2 ～ 6	3 ～ 6	3 ～ 6	2 ～ 5	2 ～ 5	1.6 ～ 3	1.2 ～ 1.6	4.1	2.2/2.4 ～ 4.8/5.1	3 ～ 4	1.0/1.5 ～ 1.4	1.0 2.0 2.2 ～ 5	3 ～ 6	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Maximum Groove Depth(mm)	-	-	-	-	8 ～ 13	20 ～ 32	4.6 ～ 8.1	-	11	-	7 ～ 9	16 ～ 23	10 ～ 14	12 ～ 18	-	-	-	-	-	-	-	-	-	12 ～ 30	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Selfishly	No-hand	Right-hand	Left-hand	No-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	-	Right-hand / Left-hand	No-hand	Right-hand / Left-hand	No-hand	Right-hand / Left-hand	No-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	No-hand	Right-hand / Left-hand	Right-hand / Left-hand	No-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand	Right-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand	No-hand	Right-hand / Left-hand
Maximum Machining Diameter(mm)	-	-	-	-	-	-	50（∞） ～ 250（∞）	-	-	20	ø42	-	-	-	40 ～ 100	28 ～ 70	32 ～ 100	18 ～ 26	80	28 ～ 75	75 ～ 160	18 ～ 24	35 ～ 76	24 ～ 60	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Number of corners for tip use	-	-	-	-	1 Corner	1 Corner	-	-	-	-	-	2 Corner	2 Corner	2 Corner	1 Corner	1 Corner	1 Corner	1 Corner	1 Corner	1 Corner	1 Corner	1 Corner	2 Corner	2 Corner	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Shank height(mm)	-	-	-	-	-	-	-	-	-	-	-	20 ～ 25	20 ～ 25	20 ～ 25	26 ～ 32	10 ～ 25	19 ～ 32	8 ～ 10	26	10 ～ 25	-	10 ～ 20	10 ～ 25	16 ～ 32	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Loading...Tải…